GB/T 10362-2008 English PDF

US$169.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 10362-2008: Inspection of grain and oils -- Determination of moisture content of maize
Status: Valid

GB/T 10362: Historical versions

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 10362-2008	169	Add to Cart	3 days	Inspection of grain and oils -- Determination of moisture content of maize	Valid
GB/T 10362-1989	239	Add to Cart	2 days	Method for determination of moisture content in maize	Obsolete

Similar standards

GB 7718   GB 7718   GB/T 5534   GB/T 45556   GB/T 15683   GB/T 10358   

Basic data

Standard ID: GB/T 10362-2008 (GB/T10362-2008)
Description (Translated English): Inspection of grain and oils -- Determination of moisture content of maize
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: X04
Classification of International Standard: 67.040
Word Count Estimation: 7,728
Date of Issue: 2008-11-04
Date of Implementation: 2009-01-20
Older Standard (superseded by this standard): GB/T 10362-1989
Adopted Standard: ISO 6540-1980, MOD
Regulation (derived from): National Standard Approval Announcement 2008 No.18 (Total No.131)
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This standard specifies the crushed corn, principles of whole corn moisture determination, instruments and appliances, steps, moisture determination and the results of calculation and representation. This standard applies to grinding corn, determination of moisture content of whole corn.

GB/T 10362-2008: Inspection of grain and oils -- Determination of moisture content of maize

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Inspection of grain and oils. Determination of moisture content of maize ICS 67.040 X04 National Standards of People's Republic of China Replacing GB/T 10362-1989 Inspection of grain and corn moisture determination [ISO 6540. 1980, Maize-Determinationofmoisturecontent (Onmiledgrainsandonwholegrains), MOD] Posted 2008-11-04 2009-01-20 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Foreword

This revised standard adopts ISO 6540. 1980 "Determination of the moisture content of maize (crushed and granulated specimen sample)" (in English). This standard and ISO 6540. 1980 main technical differences are as follows. --- Modify the sample preparation requirements; --- Modify the normative references; --- International standard two parts accordingly merger; --- Delete international standards Figure 1 and Appendix 2, Figure 3; --- Removed some help content and test reports. For ease of use, the standard ISO 6540. 1980 the following modifications. --- "This International Standard" be replaced by "this standard"; "." --- With a decimal point instead of a comma as the decimal point, ""; --- Modify the standard name; --- Remove the introduction of international standards, and directory foreword. This standard replaces GB/T 10362-1989 "Corn determination of moisture content." This standard compared with GB/T 10362-1989 main changes are as follows. --- Increasing the normative references; --- Modify the sample size requirements. Appendix A of this standard is a normative appendix. The standard proposed by the National Food Authority. This standard by the National Standardization Technical Committee OILS. This standard was drafted. Henan University, Beijing foodstuff and Inspection, National Food Quality Monitoring Center of Henan Province, Liaoning Province, State Home food quality monitoring center, Heilongjiang Province, National Food Quality Monitoring Centre, national food quality monitoring center in Jilin Province, central Kyrgyzstan grain reserves Forest Branch. The main drafters of this standard. CEREALS, Zhang Yurong, Bian Branch, Cui, Zhang Yuqin, Yin Chenghua, Cui Guohua, Songxiu Juan, Xie Yuzhen, Song length right, Fengxi Zhong, Gu Xiangming. This standard replaces the standards previously issued as follows. --- GB/T 10362-1989. Inspection of grain and corn moisture determination

1 Scope

This standard specifies the crushed corn, whole corn moisture determination principle, apparatus and appliances, procedures, and results of calculation and determination of moisture FIG. This standard applies to grinding corn, whole grain corn moisture content determination.

2 Normative references

The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard. GB 5491 grain and oilseeds testing for sampling, and sample method Principle 3 Under atmospheric pressure, the mass of corn 130 ℃ ~ 133 ℃ drying loss.

4 apparatus and appliances

4.1 Balance. dividing the value of 0.01g, 0.001g. 4.2 mill. mill bore material non-absorbent, airtight, no dead ends, easy to clean, can be rapidly and uniformly crushed 30g sample, to achieve the desired particle size Seeking, no heat when crushed. 4.3 metal dish or glass dish. no cover, make 100g Whole single sample distributed in the bottom of the dish. 4.4 metal box or glass dish. with closures; for whole grain samples, diameter 55mm ~ 60mm, height 35mm ~ 40mm; for powder Sample bake bottom of the box area requirement per square centimeter of the sample amount is not more than 0.3g. 4.5 thermostatic oven. Yes blowing means, the temperature was maintained at 60 ℃ ~ 80 ℃. 4.6 thermostatic oven. the temperature was maintained at 130 ℃ ~ 133 ℃. 4.7 dryer. fitted with an efficient desiccant.

5 Sample Preparation

GB 5491 for sampling carried out according to 5.1, and sample. 5.2 When the sample size achieved by 1.5mm diameter round hole screen a sample of not less than 90%, by 6.1 and 6.2 operation. 5.3 When the sample moisture content of 9% to 15%, first with a small sample cleaning mill (4.2), discard the crushed material, and then take 30g sample Crushed to 1.5mm diameter hole through the sieve of less than 90%, the combined sieve, sieve, mixed evenly into a sealed container in the back. 5.4 When the sample water is less than 9%, or more than 15%, the press operation 6.2.1, 5.1.3 then pulverized.

6 Moisture

6.1 a drying method Sample moisture content 9% to 15%, using a drying method, according to the operation 6.2.2. 6.2 drying method twice When the sample moisture content greater than 15%, or less than 9%, using two drying methods. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 10362-2008_English be delivered?

Answer: Upon your order, we will start to translate GB/T 10362-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 10362-2008_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 10362-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version GB/T 10362-2008?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 10362-2008 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.