GB/T 10179-2009 English PDF

US$954.00 · In stock
Delivery: <= 6 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 10179-2009: Servo-hydraulic test equipment for generating vibration -- Method of describing characteristics
Status: Valid

GB/T 10179: Historical versions

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 10179-2009	954	Add to Cart	6 days	Servo-hydraulic test equipment for generating vibration -- Method of describing characteristics	Valid
GB/T 10179-1988	RFQ	ASK	9 days	Servo-hydraulic test equipment for generating vibration--Method of describing characteristics	Obsolete

Similar standards

GB/T 12160   GB/T 17200   GB/T 13310   GB/T 44400   GB/T 44401   GB/T 44279   

Basic data

Standard ID: GB/T 10179-2009 (GB/T10179-2009)
Description (Translated English): Servo-hydraulic test equipment for generating vibration -- Method of describing characteristics
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: N73
Classification of International Standard: 17.160
Word Count Estimation: 48,482
Date of Issue: 2009-04-24
Date of Implementation: 2009-12-01
Older Standard (superseded by this standard): GB/T 10179-1988
Adopted Standard: ISO 8626-1989, IDT
Regulation (derived from): Announcement of Newly Approved National Standards No. 6, 2009 (No. 146 overall)
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This standard specifies: a) characteristic table, b) access to certain features of the standard method. This standard provides the following two levels of description used to describe the hydraulic test equipment: a) 1 -level description, b) 2 -level description. Consultation through user and manufacturer to select a description level, this standard gives the book its bid by the manufacturer in a list and description of the characteristics of the technical documentation supplied with the device. Manufacturer's technical documentation shall contain at least a description of the corresponding properties. This standard applies to the following devices: hydraulic vibration generator [ actuators, servo valves, position control device, in whole or part, if necessary, also has a static force compensation device (see Section 5, Chapter 6 and Chapter 7 Zhang) ], servo valve control device (see Chapter 5, Chapter 6 and Chapter 8), hydraulic system (see Section 5, Chapter 6 and Chapter 9), complete hydraulic vibration generator system (see Chapter 5, Chapter 6 and Chapter 10).

GB/T 10179-2009: Servo-hydraulic test equipment for generating vibration -- Method of describing characteristics

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Servo-hydraulic test equiment for generating vibration. Method of describing characteristics ICS 17.160 N73 National Standards of People's Republic of China GB/T 10179-2009/ISO 8626. 1989 Replacing GB/T 10179-1988 Hydraulic servo vibration test equipment Method of describing characteristics (ISO 8626. 1989, IDT) Posted 2009-04-24 2009-12-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Table of Contents

Preface Ⅰ Introduction Ⅱ 1 Scope 1 2 Normative references 1 3 Symbol 1 Unit 2 4 5 3 Terms and definitions 6 describes characteristics of each maker correspondence provided by Level 10 7 hydraulic vibration generator 15 7.1 General Characteristics 15 7.2 19 moving parts 7.3 Auxiliary equipment 20 7.4 Installation Requirements 21 7.5 Environmental and operating conditions 22 7.6 Technical Document 22 8 control system 23 8.1 servo valve control device 23 8.2 control and protection panel 25 8.3 Auxiliary equipment 25 8.4 Installation Requirements 25 8.5 Environmental and operating conditions 25 8.6 Technical Document 25 9 hydraulic drive system 26 9.1 General Characteristics 26 9.2 device features 26 9.3 Auxiliary equipment 28 9.4 Installation Requirements 28 9.5 Environmental and operating conditions 29 9.6 Technical Document 29 10 hydraulic vibration generator system 30 10.1 General characteristics 30 10.2 31 moving parts Auxiliary equipment 31 10.3 10.4 Installation requirements 32 10.5 environmental and working conditions 33 10.6 Technical Paper 33 Appendix A (normative) hydraulic test equipment and hydraulic schematic schematic linear vibration generator 34 Appendix B (normative) measurement or calculation of various parameters of hydraulic vibration generator 37 Annex C (normative) choice test mass 38 Annex D (normative) servo-valve control device 42 GB/T 10179-2009/ISO 8626. 1989

Foreword

This standard is equivalent to using ISO 8626. 1989 "describes a method of hydraulic servo vibration test equipment characteristics" (in English). This standard is equivalent translation ISO 8626. 1989, the standard consistent with the structure and technical content. This standard and ISO 8626. 1989 compared to editorial changes as follows. --- Remove the ISO 8626. 1989 Foreword. --- Remove the introduction of the note. --- Use the "standard" word instead of "this International Standard." --- Use the decimal symbol. "" Symbols instead of English as a decimal point "." --- Added Note 3 5.2. --- With ISO 5344.2004 definition of the term "3.10 test mass" in place of the definition of the term "5.4 Test mass" of 5.4.6 5.4.1 to delete the terms and definitions. --- Added content in the definition 5.5.11 The term "noise" in. --- In Appendix A in Figure 6, Figure 7 and Figure 8 are modified to Figure A. 1, Figure A. 2 and Figure A. 3; 6 to change the tables in Appendix C Table C. 1, Fig. 9 to Fig. C. 1; Figure in Appendix D to 10 D. FIG. 1. This standard is GB/T 10179-1988 amendment, compared with the GB/T 10179-1988 main modifications are as follows. --- Increasing the foreword (see preface to this edition). --- In accordance with ISO 8626. 1989 structure, separated from the introduction of the original standard out in Chapter 1, placed before the text. --- Deleted 1.1 Note; the "A-level description" to "Level 1 Description", the "B-level description" to "Level 2 Description" (1988 edition 1.1; 0 Excerpts of Chapters 1). --- Remove the original standard adds references GB/T 1301 "surface roughness parameters and their values"; as equivalent to international standards, The direct use of ISO 8626. 1989 international standard reference instead of their corresponding national standards referenced in the original standard (1988 Version of Chapter 2; Chapter 2 of this edition). --- 5.2 in the original Notes 2 and 3 were adjusted to Note 1 and Note 2, Note 1 is adjusted to the original Note 3 (1988 Version 5.2; Excerpts 5.2). --- The definition of the term "5.4 Test mass" has been modified, and deleted the term Article number 5.4.1 to 5.4.6 and their definitions (1988 Version 5.4; 5.4 edition). Since the implementation of this standard replaces GB/T 10179-1988. The Standard Appendix A, Appendix B, Appendix C and Appendix D are normative appendix. This standard by the national mechanical vibration, shock and condition monitoring Standardization Technical Committee (SAC/TC53) and focal points. This standard is drafted by. Changchun Testing Machine Institute Limited. Participated in the drafting of this standard. Suzhou Dongling Vibration Test Instrument Co., Ltd., Suzhou plant test equipment, Beijing Machinery Industry Automation Institute, 202 Institute of Ordnance Industry. Drafters of this standard. ROCKETS, Song Yuan, Jiang Yuntai, Xu Liyi, Wuyuan Zhen, Zhu Xiaomin, Gu Guofu. This standard replaces the standards previously issued as follows. --- GB/T 10179-1988. Please note that some of the content of this standard may involve patents. The standard release mechanism does not assume the responsibility to identify these patents. GB/T 10179-2009/ISO 8626. 1989

Introduction

This standard specifies the hydraulic servo vibration test equipment to produce linear vibration characteristics, and such equipment as a selection guide. Note. This standard is facilitate the description, the "hydraulic servo vibration test equipment" hereinafter referred to as "hydraulic test equipment." The term "hydraulic" meaning usually refers to. a hydraulic drive system for electric and hydraulic control means for conveying hydraulic fluid was variable flow Body, and a single or a plurality of control loops so that acting on the actuator to generate the vibratory motion. Hydraulic test equipment and hydraulic linear vibration generator schematic diagram shown in Figure A. 1 and A. Fig. In the hydraulic test equipment Following parts. --- Complete hydraulic vibration generator system [one (or more) of hydraulic vibration generator, one (or more) servo valve control device, Hydraulic drive system]; --- Controller; --- Auxiliary station (see ISO 6070); --- Other external devices. If the user chooses to obtain elements from multiple sources (for example, the manufacturer) and the composition of the system, Chapter 6, Chapter 7, Chapters 8 and 9 Characteristics chapter describes the provisions for which the various elements separately hydraulic servo vibration testing system. If the user chooses to obtain complete hydraulic servo vibration test systems from one source, you should refer to Chapter 6, 9, and Chapter 10. GB/T 10179-2009/ISO 8626. 1989 Hydraulic servo vibration test equipment Method of describing characteristics

1 Scope

Hydraulic test equipment for generating vibration has a wide range of properties, these properties can be assessed in different ways. In order to be able to different sources of hydraulic test equipment to compare the standards of. a) at a glance; b) the standard method for obtaining certain characteristics. This standard provides the following description of two levels, used to describe the hydraulic test equipment. a) Level 1 is described; b) Level 2 is described. Describe a level can be selected by the user and manufacturer of consultation, this standard is given by the manufacturer, in its characteristic described tenders List of technical documents and provided with the device. The manufacturer's technical file must contain at least the Level 1 describes the corresponding feature. This standard applies to the following devices. --- Hydraulic vibration generator [all or part of the actuators, servo valves, position control means, if desired, also has a static force compensation Means (see Chapter 5, Chapter 6 and Chapter 7)]; --- The servo valve control device (see Chapter 5, Chapter 6, and Chapter 8); --- Hydraulic drive system (see Chapter 5, Chapter 6 and Chapter 9); --- Complete hydraulic vibration generator system (see Chapter 5, Chapter 6, and Chapter 10).

2 Normative references

The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard. ISO 2041 vibration and shock vocabulary Determination of ISO 3746 acoustic noise source sound power levels Simple Method ISO 4406 Hydraulic fluid level of contamination by solid particles General rules ISO 4413 hydraulic transmission equipment and transmission control system applications ISO 6070 vibration generator auxiliary devices Method of describing characteristics

3 Symbol

A --- effective cross-sectional area; Rao --- acceleration; Rao b --- maximum rms random vibration acceleration; Rao g --- no control signal input of the amplifier and a load equivalent impedance of the signal source impedance, the noise generated by the acceleration; Rao 0 --- maximum no-load acceleration; Rao max --- maximum acceleration (see 5.5.7.2.1.1); Chou --- viscous damping; Ba --- P-wave velocity (see Appendix C); GB/T 10179-2009/ISO 8626. 1989 ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 10179-2009_English be delivered?

Answer: Upon your order, we will start to translate GB/T 10179-2009_English as soon as possible, and keep you informed of the progress. The lead time is typically 4 ~ 6 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 10179-2009_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 10179-2009_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version GB/T 10179-2009?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 10179-2009 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.