GB/T 10043-2017 English PDFUS$279.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 10043-2017: Clutch classification Status: Valid GB/T 10043: Historical versions
Basic dataStandard ID: GB/T 10043-2017 (GB/T10043-2017)Description (Translated English): Clutch classification Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: J19 Classification of International Standard: 21.120.20 Word Count Estimation: 14,181 Date of Issue: 2017-02-28 Date of Implementation: 2017-06-01 Older Standard (superseded by this standard): GB/T 10043-2003 Quoted Standard: GB/T 1144; GB/T 3478.1; GB/T 3852; GB/T 9114; GB/T 28701 Regulation (derived from): National Standard Announcement No. 4 of 2017 Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This standard specifies the classification of the clutch and self-control clutch and model representation. This standard applies to operating clutch and automatic clutch. GB/T 10043-2017: Clutch classification---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.Clutch classification ICS 21.120.20 J19 National Standards of People's Republic of China Replace GB/T 10043-2003 Clutch classification 2017-02-28 released 2017-06-01 implementation General Administration of Quality Supervision, Inspection and Quarantine of the People 's Republic of China China National Standardization Management Committee released Directory Preface I 1 Scope 1 2 normative reference document 1 3 Clutch Classification 1 4 Clutch model representation method 5 5 Marking methods and examples 10 ForewordThis standard is drafted in accordance with the rules given in GB/T 1.1-2009. This standard replaces GB/T 10043-2003 "Clutch Classification". Compared with GB/T 10043-2003, the main technical differences are as follows. --- some of the English and Chinese printing errors and some English has been modified; --- 3.1.2.8 "permanent magnet clutch", 3.1.2.8.1 "contact permanent magnet clutch", 3.1.2.8.2 "non-contact permanent magnet clutch" Classification; --- increase the flange type and mark. This standard is proposed and assigned by the National Committee on Standardization of Machine Shaft and Accessories (SAC/TC109). The drafting unit of this standard. Wanxiang Qianchao Co., Ltd., China Machine Productivity Promotion Center, Shaanxi Xianyang Beyond Clutch Co., Ltd., North Beijing Xinxing over clutch Co., Ltd. The main drafters of this standard. Ming Cui new, wide range, Lin Guangzhong, Ren Xupeng, Zhu Chunmei, Deng Gao see, Zhu Yue. This standard replaced the previous version of the standard release. --- GB/T 10043-1988, GB/T 10043-2003. Clutch classification1 ScopeThis standard specifies the classification of the clutch and self-control clutch and model representation. This standard applies to the operation of clutch and self-control clutch.2 normative reference documentsThe following documents are indispensable for the application of this document. For dated references, only the dated edition applies to this article Pieces. For undated references, the latest edition (including all modifications) applies to this document. GB/T 1144 Rectangular spline dimensions, tolerances and tests GB/T 3478.1 Cylindrical straight teeth involute splines (metric series of teeth) Part 1. General GB/T 3852 Coupling shaft hole and coupling type and dimensions GB/T 9114 with steel pipe flange with neck thread GB/T 28701 expansion joint3 clutch classification3.1 Manipulating the clutch 3.1.1 mechanical clutch 3.1.1.1 Chip Clutch 3.1.1.1.1 Dry single-chip clutch (referred to as chip clutch) 3.1.1.1.2 wet single-chip clutch 3.1.1.1.3 Double-disc clutch 3.1.1.1.4 wet two-piece clutch 3.1.1.1.5 multi-disc clutch 3.1.1.1.6 wet multi-plate clutch 3.1.1.1.7 inverted wet multi-plate clutch 3.1.1.1.8 Double acting disc clutch 3.1.1.2 Jawing Clutch 3.1.1.2.1 Positive Triangular Jaw Clutch (referred to as Jaw Clutch) 3.1.1.2.2 Double-sided triangular jaw clutch (referred to as double-sided jaw clutch) 3.1.1.2.3 oblique triangular jaw clutch 3.1.1.2.4 Forward trapezoidal jaw clutch 3.1.1.2.5 oblique trapezoidal jaw clutch 3.1.1.2.6 Taper-shaped jaw clutch 3.1.1.2.7 helical jaw clutch ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 10043-2017_English be delivered?Answer: Upon your order, we will start to translate GB/T 10043-2017_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 10043-2017_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 10043-2017_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 10043-2017?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 10043-2017 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
