GB/T 5184-2016 English PDF

US$199.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 5184-2016: Fork-lift trucks -- Hook-on type fork arms and fork arm carriages -- Mounting dimensions
Status: Valid

GB/T 5184: Historical versions

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 5184-2016	199	Add to Cart	3 days	Fork-lift trucks -- Hook-on type fork arms and fork arm carriages -- Mounting dimensions	Valid
GB/T 5184-2008	319	Add to Cart	3 days	Fork-lift trucks -- Hook-on type fork arms and fork arm carriages -- Mounting dimensions	Obsolete
GB/T 5184-1996	279	Add to Cart	3 days	Fork-lift trucks--Hook-on type fork arms and fork arm carriages--Mounting dimensions	Obsolete
GB 5184-1985	199	Add to Cart	2 days	Fork lift trucks--Hook-on type fork arms and fork carriers--Mounting dimensions	Obsolete

Similar standards

GB/T 10827.3   GB/T 10827.2   GB 10827.1   GB/T 6104.2   GB/T 5182   

Basic data

Standard ID: GB/T 5184-2016 (GB/T5184-2016)
Description (Translated English): Fork-lift trucks -- Hook-on type fork arms and fork arm carriages -- Mounting dimensions
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: J83
Classification of International Standard: 53.060
Word Count Estimation: 10,193
Date of Issue: 2016-10-13
Date of Implementation: 2017-05-01
Older Standard (superseded by this standard): GB/T 5184-2008
Regulation (derived from): National Standard Notice No.1716 of 2016
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China

GB/T 5184-2016: Fork-lift trucks -- Hook-on type fork arms and fork arm carriages -- Mounting dimensions

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Fork-lift trucks - Hook-on type fork arms and fork arm carriages - Mounting dimensions ICS 53.060 J83 National Standards of People's Republic of China Replacing GB/T 5184-2008 Forklift hook type fork and fork frame installation size (ISO 2328..2011, IDT) 2016-10-13 released 2017-05-01 implementation General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China China National Standardization Management Committee released

Foreword

This standard is drafted in accordance with the rules given in GB/T 1.1-2009. The standard instead of GB/T 5184-2008 "forklift hook fork and fork fork installation size", and GB/T 5184-2008 phase The main technical changes are as follows. --- increase the lower beam on the loading and unloading slot for the optional parts, and the lower loading and unloading tank should be deeper than the k2 3mm requirements (see 4.1); --- modified the requirements of the loading and unloading of the lower beam, stressed that the use of eccentric loading and unloading tank alone should have warning content (see 4.3,2008 version Of the 4.3); - the dimensions of the partial tolerance values in Figures 2 and 3 are modified (see Figures 2, 3 of Figures 2, 3 and.2008); - modify the range of values for the lower hooks in Table 1 (see Table 1, Table 8, Table 1). This standard uses the translation method equivalent to ISO 2328..2011 "forklift hook type fork and fork frame installation size". And the normative reference in this standard international documents are consistent with the relationship between China's documents are as follows. GB/T 5140-2005 Forklift hook type fork term (ISO 2331. 1974, IDT) - GB 10827.1-2014 Safety requirements and verification of industrial vehicles - Part 1. Self-propelled industrial vehicles (except unmanned vehicles (ISO 3691-1..2011, IDT), telescopic forklift and carrier This standard has made the following editorial changes. --- According to the requirements of China's mechanical drawing standards, Figure 1, Figure 2 and Figure 3 were modified; --- Corrected the printing errors in Table 2 "Loading and unloading slot offset size w". This standard is proposed by the China Machinery Industry Federation. This standard by the National Industrial Vehicle Standardization Technical Committee (SAC/TC332) centralized. The standard responsible for the drafting unit. Hang fork Group Co., Ltd., Beijing lifting transport machinery design and research institute, the national lifting transport machinery Quality Supervision and Inspection Center. This standard participates in the drafting unit. Anhui Heli Co., Ltd., Linde (China) Forklift Co., Ltd., Shandong Shantui Machinery Co., Ltd., Ningbo Ruyi Co., Ltd. The main drafters of this standard. Wu Qiangli, Wang Meiyang, Zhou Yunfeng, Ni Jingzhong, Zhao Chunhui, Li Yingxin, Yi Changchun, Feng Zhenli. This standard replaced the previous version of the standard release. GB/T 5184-1985, GB/T 5184-1996, GB/T 5184-2008. Forklift hook type fork and fork frame installation size

1 Scope

This standard specifies the installation dimensions and additional requirements for forklift hooks and forklifts so that the forks and/or other change. These dimensions and requirements relate to the rated weight of the forklift (not more than 10,999 kg) and the type of fork.

2 normative reference documents

The following documents are indispensable for the application of this document. For dated references, only the dated edition applies to this article Pieces. For undated references, the latest edition (including all modifications) applies to this document. ISO 2331 Forklifttrucks-Hook-ontypeforkarms-Vocabulary ISO 3691-1 Industrial vehicles - Safety requirements and verification - Part 1. Self - propelled industrial vehicles (except unmanned vehicles, telescopic arms Forklift and carrier) (Industrialtrucks-Safetyrequirementsandverification-Part 1. Self-propeledin- dustrialtrucks, otherthandriverlesstrucks, variable-reachtrucksandburden-carriertrucks)

3 terms and definitions

The terms and definitions defined in ISO 2331 and ISO 3691-1 apply to this document.

4 requirements

4.1 size The fork is fitted with a fork for the A-type (low) and B-type (high) fork (the type of fork is determined by the position of the lower hook) The dimensions shall be in accordance with the requirements of Figures 1, 2 and 3 and Table 1 and Table 2, respectively. The loading and unloading slots on the lower beam are optional and should meet the requirements of 4.3 begging. The fork locating slots shall be distributed at the appropriate spacing on the crossbar of the fork in accordance with the dimensions specified in Table 2. In order to locate the tool, A positioning groove shall be provided at the upper edge of the crossbar center line on the fork. However, when the accident is to fall off, the lower part will be loaded and unloaded When the groove is eccentric, the groove should be offset from the centerline of the yard (see Figure 1); the lower loading and unloading slot should be further deepened than k2 (see Figure 3) 3mm, in order to facilitate the installation of fork and other accessories. 4.2 stopper In order to prevent the fork from falling off the end of the fork, it shall be provided with a stop. If these stops are not permanently fixed, such as welding The instruction manual should contain the "if the block is not properly in place, the forklift should be prohibited" warning. 4.3 loading and unloading slots on the lower beam If the fork in the fork on the lower edge of the fork, then the location of the fork loading and unloading slot should be shown in Figure 3, Figure 3, view XX As an optional structure. If the arrangement of the upper and lower tiles on the yard may cause the fork or other restorations to fall off from the beam, Other measures (such as mechanical devices) prevent this from happening. If the eccentric loading and unloading tank is used as a method to prevent accidental shedding of the fork, the following precaution should be included in the instruction manual content. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 5184-2016_English be delivered?

Answer: Upon your order, we will start to translate GB/T 5184-2016_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 5184-2016_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 5184-2016_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version GB/T 5184-2016?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 5184-2016 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.