GB/T 5182-2008 English PDFUS$114.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 5182-2008: Fork-lift trucks -- Fork arms -- Technical characteristics and testing Status: Valid GB/T 5182: Historical versions
Basic dataStandard ID: GB/T 5182-2008 (GB/T5182-2008)Description (Translated English): Fork-lift trucks -- Fork arms -- Technical characteristics and testing Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: J83 Classification of International Standard: 53.060 Word Count Estimation: 6,627 Date of Issue: 2008-05-05 Date of Implementation: 2008-11-01 Older Standard (superseded by this standard): GB/T 5182-1996 Quoted Standard: GB/T 229; GB/T 5140; GB/T 5184-2008; ISO 683-1-1987 Adopted Standard: ISO 2330-2002, IDT Regulation (derived from): National Standard Approval Announcement 2008 No.7 (Total No.120) Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This standard specifies the production of various types of solid section installed fork manufacturing, tests and marking requirements. These include, but are not limited to fork hook type, sleeve -type or pin type, bolted -and roller -type fork. By fork manufacturers and users consultations agreed that these requirements also apply to non- production of forks. GB/T 5182-2008: Fork-lift trucks -- Fork arms -- Technical characteristics and testing---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.Fork-lift trucks. Fork arms. Technical characteristics and testing ICS 53.060 J83 National Standards of People's Republic of China GB/T 5182-2008/ISO 2330.2002 Replacing GB/T 5182-1996 Forks technical requirements and test methods (ISO 2330.2002, IDT) Posted 2008-05-05 2008-11-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released ForewordThis standard is identical with ISO 2330.2002 "forks technical requirements and test methods" (in English). This standard is equivalent translation ISO 2330.2002. For ease of use, this standard made the following editorial changes. --- "This International Standard" be replaced by "this standard"; "." --- With a decimal point instead of a comma as the decimal point, ""; --- Delete foreword international standards; --- To ISO 2330.2002 in reference to other international standards, with the international standard has been adopted as a standard in place of the corresponding; --- 5.1 to remove the "load center is not more than 4000kg × 600mm" statements; --- 6.2 to remove the "load center 5500kg × 600mm" statements; --- 6.1.2, with the "q" instead of "Q". This standard replaces GB/T 5182-1996 "forks technical requirements and testing." Compared with GB/T 5182-1996 Main Changes are as follows. --- Chapter 1, an increase of various forms of solid section to install specific types of forks, including hook, sleeve-type or pin type, bolts Connection type and roller type fork; --- The standard Chapter 2, with the GB/T 229 instead of the original standard ISO 148. 1983; --- The standard 6.1.1,6.1.2 and 6.2 in a single rated value divided by weight of the original standard "5000kg" to "5500kg"; --- 6.1.2, with the "q" instead of "Q"; --- Standard "Note 1" to this standard in Chapter 9 of the original terms of Chapter 9. The standard proposed by China Machinery Industry Federation. This standard is under the jurisdiction of Beijing Materials Handling Research Institute. This standard is drafted by. Beijing Materials Handling Research Institute. Participated in the drafting of this standard. Zhejiang Connaught Machinery Co., Ltd. The main drafters of this standard. Zhao Chunhui. This standard replaces the standards previously issued as follows. --- GB/T 5182-1985, GB/T 5182-1996. GB/T 5182-2008/ISO 2330.2002 Forks technical requirements and test methods1 ScopeThis standard specifies the production of various types of solid section installed fork manufacturing, testing and marking requirements. These include fork But not limited to hook-type, shaft type or pin type, bolted type and roller type fork. By fork manufacturers and users agreed that these requirements also apply to non-production of forks.2 Normative referencesThe following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard. GB/T 229 metal Charpy pendulum impact test method (GB/T 229-2007, ISO 148-1.2006, MOD) GB/T 5140 trucks hook type fork term (GB/T 5140-2005, ISO 2331. 1974, IDT) GB/T 5184-2008 trucks - Hook - on type fork and fork frame dimensions (ISO 2328.2007, IDT) ISO 683-1. 1987 heat-treated steels, alloy steels and free cutting steels - Part 1. in accordance with different shaped black steel work hardening of the non-direct Alloy steel and low-alloy forged steel3 Terms and DefinitionsGB/T 5140 and established the following terms and definitions apply to this standard. 3.1 New cross-section of the horizontal section in any combination, the new cross-section of the vertical section, new materials, new root hook or a new fork structure, ready for use as production Fork. Manufacturing 4 Fork should manufacture solid cross-section material.5 Test5.1 Fork samples should yield trials conducted in Chapter 6 and Chapter 7 of the impact test and meet their test requirements. Single nominal weight of not more than 4000kg forks samples should be Chapter 8, fatigue tests, and meet their test requirements. 5.2 by fork manufacturers and users agreed, mass production can be regularly fork Chapters 6 and 7 of the test.6 Yield Test6.1 Test load FT test load its nominal weight C three times. FT test load for the rated capacity C (in kilograms) multiplied by a safety factor of R, R value calculated and R≥2.5. GB/T 5182-2008/ISO 2330.2002 ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 5182-2008_English be delivered?Answer: Upon your order, we will start to translate GB/T 5182-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 5182-2008_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 5182-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 5182-2008?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 5182-2008 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
