GB/T 5031-2019 English PDFUS$1139.00 ยท In stock
Delivery: <= 9 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 5031-2019: Tower crane Status: Valid GB/T 5031: Historical versions
Basic dataStandard ID: GB/T 5031-2019 (GB/T5031-2019)Description (Translated English): Tower crane Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: J80 Classification of International Standard: 53.020.20 Word Count Estimation: 62,627 Date of Issue: 2019-08-30 Date of Implementation: 2020-03-01 Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration GB/T 5031-2019: Tower crane---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.Tower crane ICS 53.020.20 J80 National Standards of People's Republic of China Replace GB/T 5031-2008 Tower crane Published on.2019-08-30 2020-03-01 implementation State market supervision and administration China National Standardization Administration issued ContentForeword I 1 Scope 1 2 Normative references 1 3 Terms and Definitions 2 4 Classification and Identification 3 5 Technical requirements 5 6 Test method 28 7 Inspection rules 32 8 information sign 32 9 Packaging, transport and storage 33 10 Installation and climb 34 11 use check 39 Appendix A (Normative Appendix) Structural Test Method 40 Appendix B (informative) Workspace Limiter---Anti-collision/partitioning device regulations 45 Appendix C (informative) The information that the manufacturer should provide when ordering the tower crane 48 Appendix D (Normative Appendix) Test Method for Safety Devices 50 Appendix E (Normative Appendix) Tower Crane Inspection Items and Decisions 53 Appendix F (informative) Tower crane climb operation 56ForewordThis standard was drafted in accordance with the rules given in GB/T 1.1-2009. This standard replaces GB/T 5031-2008 "Tower Crane". The main technical changes compared with GB/T 5031-2008 are as follows. --- Added the terms "fixed tower crane", "climbing support device" and "replacement support device" (see 3.13, 3.14, 3.15); --- Revised the model classification method and labeling principles (see 4.1, 4.2,.2008 and 4.1 and 4.2); --- Revised the technical requirements of "balance weight and weight" (see 5.2.1, 5.2.1.1 of.2008 edition); --- Supplementary amendments to the requirements for "climbing devices" (see 5.2.3, 5.6.11); --- Adjusted the requirements for "wire rope anti-off device" (see 5.6.10, 5.6.10 of.2008 edition); --- Added "climbing device" test method (see 6.7); --- Added the method of "inspection of the boom amplitude limiting device" (see Appendix D.6); --- Removed the "reliability" requirements and test methods (see 5.2.5, 6.4, Appendix F of the.2008 edition); --- Removed Appendix A and Appendix I, and changed to direct reference standards (see 5.3.1.2, 11.5.4, Appendix A, Appendix I of the.2008 edition). This standard was proposed by the China Machinery Industry Federation. This standard is under the jurisdiction of the National Crane Machinery Standardization Technical Committee (SAC/TC227). This standard is drafted by. Beijing Construction Mechanization Research Institute Co., Ltd. Participated in the drafting of this standard. Zhonglian Heavy Industry Co., Ltd., Shenyang Sanyo Construction Machinery Co., Ltd., Fushun Yongmao Construction Machinery Company, Xuzhou Construction Machinery Engineering Co., Ltd., Hubei Jianghan Construction Engineering Machinery Co., Ltd., Beijing Construction Machinery and Materials Quality Supervision Supervisory Inspection Station, Harbin Institute of Technology, Sichuan Construction Machinery (Group) Co., Ltd., Zhejiang Construction Machinery Group Co., Ltd., Jiangsu Zheng Xing Construction Machinery Co., Ltd., Guangxi Construction Engineering Group Construction Machinery Manufacturing Co., Ltd., Shandong Hongda Construction Engineering Group Co., Ltd., Shanghai Building Science Research Institute (Group) Co., Ltd., Zhejiang Huba Construction Machinery Co., Ltd., Harbin Dongjian Machinery Manufacturing Co., Ltd., Jiangyan Machine Electric Group Co., Ltd., Chengdu Jiuhe Construction Machinery Co., Ltd., Liaoning Provincial Safety Science Research Institute, Guangdong Academy of Building Science Group Co., Ltd., Beijing Zhenghe Engineering Equipment Service Co., Ltd., Shanghai Construction Engineering Research Institute Co., Ltd., Jiangxi Jiangte Motor Co., Ltd. Company, China Xinxing Construction and Development Co., Ltd., Beijing Chengjianwu Construction Group Co., Ltd., China Railway Construction Group Co., Ltd., Jiangxi Zhongzhong Tian Machinery Co., Ltd., Jiangxi Huawu Brake Co., Ltd., Beijing Jiangong Civil Engineering Co., Ltd., China Construction Education Association. The main drafters of this standard. Luo Wenlong, Yao Jinke, Yu Lekang, Li Guowei, Cai Bing, Mi Chenghong, Tian Guangfan, Wen Zhaohui, Wang Kaihui, Lampeng, Liao Duochang, Jin Hexiang, Wang Xingjie, Jiang Yan, Fu Jianxiong, Zheng Jun, Zhou Zhiyong, Fan Bin, Wang Yihua, Zhu Lirong, Shi Xiangdong, Xiao Ming, Chen Yunlong, Tang Kunlin, Lu Tianxing, Yang Jie, Shen Hongzhi, Tian Kai, Luo Binfei, Du Junhua, You Dajiang, Shuai Yubing, Liu Chengyu. The previous versions of the standards replaced by this standard are. ---GB 5031-1985, GB/T 5031-1994, GB/T 5031-2008; ---GB 9462-1988, GB/T 9462-1999; ---GB/T 17806-1999; ---GB/T 17807-1999. Tower crane1 ScopeThis standard specifies the classification and identification of tower cranes (hereinafter referred to as tower cranes), technical requirements, test methods, inspection rules, information standards. Inspection, packaging, transportation and storage, installation and climbing, use inspection. This standard applies to tower cranes as defined in GB/T 6974.3. This standard does not apply to mobile cranes that can be installed with towers, with mounting masts without or with arms.2 Normative referencesThe following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article. Pieces. For undated references, the latest edition (including all amendments) applies to this document. GB/T 699 high quality carbon structural steel GB/T 700 carbon structural steel GB/T 985.1 Recommended groove for gas welding, electrode arc welding, gas shielded welding and high energy beam welding GB/T 985.2 recommended groove for submerged arc welding GB/T 1591 low alloy high strength structural steel GB/T 3098.1 Fastener mechanical properties bolts, screws and studs GB/T 3098.2 fastener mechanical properties nut GB/T 3274 carbon structural steel and low alloy structural steel hot rolled steel sheet and strip GB/T 3323 metal fusion welding joints radiography General rules and safety requirements for GB/T 3766 hydraulic drive systems and their components GB/T 4728 (all parts) Graphical symbols for electrical diagrams GB/T 5117 non-alloy steel and fine-grain steel electrode GB/T 5118 heat-strength steel electrode GB 5144 tower crane safety regulations GB/T 5226.32 Mechanical electrical safety machinery and electrical equipment - Part 32. Technical conditions GB/T 5293 Submerged arc welding non-alloy steel and fine grain steel solid welding wire, flux cored wire and wire-flux combination classification requirements GB/T 5972 crane wire rope maintenance, maintenance, inspection and scrapping GB/T 6974.1 Crane terminology Part 1. General terms GB/T 6974.3 Crane terminology Part 3. Tower cranes GB/T 8110 carbon steel, low alloy steel welding wire for gas shielded arc welding GB/T 8918 important purpose wire rope GB/T 10051.1 lifting hooks - Part 1. Mechanical properties, lifting weights, stresses and materials GB/T 10051.2 lifting hooks - Part 2. Technical conditions for forged hooks GB/T 12470 Submerged arc welding heat-strength steel solid wire, flux cored wire and wire-flux combination classification requirements GB/T 13752 tower crane design specification Technical conditions for GB/T 14292 carbon structural steel and low alloy structural steel hot rolled strip ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 5031-2019_English be delivered?Answer: Upon your order, we will start to translate GB/T 5031-2019_English as soon as possible, and keep you informed of the progress. The lead time is typically 6 ~ 9 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 5031-2019_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 5031-2019_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 5031-2019?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 5031-2019 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
