GB 45067-2024 English PDFUS$199.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB 45067-2024: Criteria for major accident potential of special equipment judgment Status: Valid
Basic dataStandard ID: GB 45067-2024 (GB45067-2024)Description (Translated English): Criteria for major accident potential of special equipment judgment Sector / Industry: National Standard Classification of Chinese Standard: C75 Classification of International Standard: 13.100 Word Count Estimation: 10,160 Date of Issue: 2024-11-28 Date of Implementation: 2024-12-01 Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration GB 45067-2024: Criteria for major accident potential of special equipment judgment---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.ICS 13.100 CCSC75 National Standard of the People's Republic of China Criteria for determining major accident hazards of special equipment Released on 2024-11-28 2024-12-01 implementation State Administration for Market Regulation The National Standardization Administration issued Table of ContentsPreface III Introduction IV 1 Scope 1 2 Normative references 1 3 Terms and Definitions 1 4 Criteria 1 References 4ForewordThis document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for standardization work Part 1.Structure and drafting rules for standardization documents" Drafting. Please note that some of the contents of this document may involve patents. The issuing organization of this document does not assume the responsibility for identifying patents. This document is proposed and coordinated by the State Administration for Market Regulation.IntroductionThe main responsibility for determining the major accident hazards of special equipment in this document is the special equipment user unit; the Special Equipment Safety Supervision and Management Department The items determined by the supervisory inspection are limited to 4.1a), 4.1b), 4.1c), 4.2a), 4.3a), 4.4a), 4.5a), 4.6a), 4.7a), 4.7b), 4.8a), 4.9a), 4.10a); Special equipment inspection institutions or technical institutions conduct supervisory inspections, regular inspections or corresponding technical services on special equipment. Provide technical support for the determination of major accident hazards of equipment. If other situations other than those in 4.1 to 4.10 are found that may lead to special equipment accidents, the user unit may The probability and severity of the accident consequences are determined. Criteria for determining major accident hazards of special equipment1 ScopeThis document specifies the terms, definitions and determination criteria for major accident hazards of special equipment. This document is applicable to the determination of major accident hazards of special equipment during its use. This document does not apply to. a) Special equipment used in military equipment, nuclear facilities, and aerospace vehicles; b) Railway locomotives, offshore facilities and ships, special equipment used in mines, special equipment for civil airports, housing construction sites, Lifting machinery used at municipal engineering construction sites and special motor vehicles within the site (factory); c) Special equipment that does not need to be registered for use according to the special equipment safety technical specifications.2 Normative referencesThis document has no normative references.3 Terms and definitionsThe following terms and definitions apply to this document. 3.1 In the process of using special equipment, there are potential hazards that may cause mass casualties or significant economic losses. Full situation. Note. Major accident hazards of special equipment correspond to serious accident hazards in the "Special Equipment Safety Law of the People's Republic of China". 4.Judgment Criteria 4.1 If special equipment continues to be used under any of the following circumstances, it shall be considered as a major accident hazard. a) The special equipment is produced without a license, is eliminated by state order due to safety issues, has been scrapped or has reached scrap conditions. b) An accident occurred with the special equipment, but the equipment was not fully inspected and potential accident hazards were not eliminated. c) The supervisory inspection is not carried out in accordance with the regulations or the supervisory inspection fails. d) There are situations where the specified parameters and usage ranges specified in 4.2 to 4.10 are exceeded. 4.2 If a boiler continues to be used when any of the following conditions are met, it shall be considered as a major accident hazard. a) The inspection conclusion of the periodic inspection is "not in compliance with the requirements". b) Failure of thermal instruments or interruption of control power (gas) power make it impossible to monitor and adjust the main operating parameters. c) The safety valve (bursting disc device) is missing or inoperative. d) The system alarm device is missing or malfunctioning. e) The interlocking protection device is missing or ineffective. f) The flameout protection device is missing or ineffective. g) The main steam-water pipeline of the power station boiler leaks or the pipeline within the boiler area ruptures. ...... |
