GB 40554.4-2025 English PDFUS$379.00 ยท In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email. GB 40554.4-2025: Code of safety practice for offshore oil and gas exploration and production - Part 4: Beach shallow Status: Valid
Basic dataStandard ID: GB 40554.4-2025 (GB40554.4-2025)Description (Translated English): Code of safety practice for offshore oil and gas exploration and production - Part 4: Beach shallow Sector / Industry: National Standard Classification of Chinese Standard: E09 Classification of International Standard: 13.100 Word Count Estimation: 18,166 Date of Issue: 2025-05-30 Date of Implementation: 2025-12-01 Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration GB 40554.4-2025: Code of safety practice for offshore oil and gas exploration and production - Part 4: Beach shallow---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. ICS 13.100 CCSE09 National Standard of the People's Republic of China Safety regulations for offshore oil and gas production Part 4.Beach and sea area Part 4.Beachshalow Released on 2025-05-30 2025-12-01 Implementation State Administration for Market Regulation The National Standardization Administration issued Table of contentsPreface III Introduction IV 1 Scope 1 2 Normative references 1 3 Terms and Definitions 1 4 Basic Requirements 2 5 Offshore oil production facilities 2 5.1 Beach, sea and onshore oil facilities 2 5.2 Artificial oil islands 4 5.3 Subsea pipelines 4 5.4 Fixed platform 5 6 Offshore oil operation facilities 5 7 Equipment and Facilities 5 7.1 Rescue and escape equipment and fire fighting equipment 5 7.2 Electrical and safety instrument equipment 6 7.3 Communication equipment 6 7.4 Traffic equipment 7 7.5 Drilling and workover equipment 7 8 Job Management 7 8.1 Operating procedures 7 8.2 Geophysical exploration 7 8.3 Drilling operations 7 8.4 Mud logging operations 9 8.5 Well logging operations 9 8.6 Underground Operations 9 8.7 Special Assignments 11ForewordThis document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for standardization work Part 1.Structure and drafting rules for standardization documents" Drafting. This document is Part 4 of GB 40554 "Safety Code for Offshore Oil and Gas Exploitation". GB 40554 has been issued for the following part. --- Part 1.General; --- Part 2.Marine part; --- Part 3.Shore terminal section; --- Part 4.Beach and sea areas. Please note that some of the contents of this document may involve patents. The issuing organization of this document does not assume the responsibility for identifying patents. This document is proposed and coordinated by the Ministry of Emergency Management of the People's Republic of China.IntroductionIn order to strengthen the safety management of offshore oil production, protect the lives and property of employees, and prevent and reduce offshore oil production safety accidents, Therefore, in accordance with the "Safety Production Law of the People's Republic of China" and other laws, GB 40554 "Safety Regulations for Offshore Oil and Gas Exploitation" was formulated. GB 40554 aims to specify the safety requirements for offshore oil and gas extraction operations and consists of the following four parts. --- Part 1.General. The purpose is to specify the general requirements for production safety applicable to offshore oil and gas production. --- Part 2.Offshore. The purpose is to specify the offshore (chart water depth exceeds 5m) offshore oil and gas extraction operations. Safety production requirements during business activities. --- Part 3.Onshore terminal part. The purpose is to specify the process of offshore oil and gas extraction operations at onshore terminals. safety production requirements. --- Part 4.Beach Sea Part. The purpose is to stipulate the offshore oil and gas operations in beach sea (with a depth of less than 5m on the chart). Safety production requirements during mining operations. This document, as part 4 of GB 40554, proposes the following requirements for offshore oil and gas exploitation in waters with a depth of less than 5 m. The safety production requirements for oil production activities are clarified, and the safety technical indicators for beach and offshore oil production facilities, equipment management, operation management, and emergency management are clarified. To standardize the safety management of offshore oil and gas, consolidate mature experience and technology, control the risks of offshore oil and gas production operations, and ensure the safety of offshore oil and gas production. The safety of life and property of offshore oil and gas exploitation workers, prevention and reduction of offshore oil production safety accidents, and the protection of offshore oil and gas development Provide a basis for normalization and standardization of safety management. Safety regulations for offshore oil and gas production Part 4.Beach and sea area1 ScopeThis document defines the safety procedures for offshore oil and gas production operations, and stipulates basic requirements, offshore oil production facilities, offshore oil The safety requirements, operating instructions and conversion conditions for operating facilities, equipment facilities and operating management, and the corresponding verification methods are described. This document applies to the safety management of offshore oil and gas exploitation in sea areas where the water depth on the nautical chart is less than 5m (including 5m).2 Normative referencesThe contents of the following documents constitute essential clauses of this document through normative references in this document. For referenced documents without a date, only the version corresponding to that date applies to this document; for referenced documents without a date, the latest version (including all amendments) applies to This document. GB 2894 Safety colors and safety signs GB 15599 Lightning safety specification for petroleum and petroleum facilities GB 40554.1 Safety regulations for offshore oil and gas production Part 1.General principles GB 40554.2 Safety regulations for offshore oil and gas production Part 2.Offshore GB 50057 Code for Lightning Protection Design of Buildings GB 50084 Design specification for automatic sprinkler fire extinguishing systems GB 50150 Electrical equipment acceptance test standard for electrical installation engineering GB 50151 Technical Standard for Foam Fire Extinguishing Systems GB 50169 Specification for construction and acceptance of grounding devices for electrical installation projects GB 50350 Oilfield oil and gas gathering and transportation design specification GB 50370 Design specification for gas fire extinguishing systems GB/T 50493 Design standard for flammable and toxic gas detection and alarm in petrochemical industry GB 50974 Technical specification for fire water supply and fire hydrant systems3 Terms and definitionsThe terms and definitions defined in GB 40554.1 and the following apply to this document. 3.1 oilartificialisland In the coastal waters, island structures that are not connected to the land and are built with sand, stone, concrete, etc. as the main materials, as well as those related to exploration and development Set of oil facilities. 3.2 A channel built in the beach area to connect the land with the beach and sea onshore oil facilities or between the beach and sea onshore oil facilities. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB 40554.4-2025_English be delivered?Answer: Upon your order, we will start to translate GB 40554.4-2025_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB 40554.4-2025_English with my colleagues?Answer: Yes. The purchased PDF of GB 40554.4-2025_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |
