GB 39800.9-2024 English PDFUS$439.00 · In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email. GB 39800.9-2024: Specifications for the provision of personal protective equipment - Part 9: Automobile industry Status: Valid
Basic dataStandard ID: GB 39800.9-2024 (GB39800.9-2024)Description (Translated English): Specifications for the provision of personal protective equipment - Part 9: Automobile industry Sector / Industry: National Standard Classification of Chinese Standard: C73 Classification of International Standard: 13.340.01 Word Count Estimation: 22,244 Date of Issue: 2024-12-31 Date of Implementation: 2026-01-01 Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration GB 39800.9-2024: Specifications for the provision of personal protective equipment - Part 9: Automobile industry---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. National Standard of the People's Republic of China ICS 13.340.01CCS C 73 Specifications for personal protective equipment Part 9.Automobile Specifications for the provision of personal protective equipment- Part 9.Automobile industry 2024-12-31 Release 2026-01-01 Implementation State Administration for Market Regulation The National Standardization Administration issued Table of ContentsPreface Ⅲ Introduction Ⅳ 1 Scope...1 2 Normative references ...1 3 Terms and Definitions 1 4 General Requirements 1 5 Identification and assessment of hazard factors 1 6 Provision of personal protective equipment 5 Appendix A (Informative) Types of work in the automotive industry and their possible hazards 7 Appendix B (Informative) Provision of personal protective equipment for various types of work in the automotive industry 9 References ...16ForewordThis document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for standardization work Part 1.Structure and drafting rules for standardization documents" Drafting. This document is Part 9 of GB 39800 “Specifications for the use of personal protective equipment”. GB 39800 has been published in the following parts. --Part 1.General; --Part 2.Petroleum, Chemicals, and Natural Gas; --Part 3.Metallurgy and nonferrous metals; --Part 4.Non-coal mines; --Part 5.Building materials; --Part 6.Electricity; --Part 7.Electronics; -- Part 8.Ships; --Part 9.Automobiles. Please note that some of the contents of this document may involve patents. The issuing organization of this document does not assume the responsibility for identifying patents. This document is proposed and coordinated by the Ministry of Emergency Management of the People's Republic of China.IntroductionPersonal protective equipment, also known as labor protection equipment, is the "last line of defense" to protect the lives and safety of hundreds of millions of workers. Wearing and using personal protective equipment is an important means to ensure safe production and emergency management in my country. The standard for the allocation of protective equipment is a combination of Article 45 of the "Safety Production Law of the People's Republic of China" and the "Regulations on the Administration of Labor Protection Articles for Employers". GB 39800 "Specification for the allocation of personal protective equipment" aims to establish the allocation of personal protective equipment for employers. The equipment and management requirements are planned to consist of the following 12 parts. --Part 1.General Principles. The purpose is to establish the overall requirements for the provision of personal protective equipment by employers, including the principles of provision, Process, identification and assessment of workplace hazards, selection, scrapping and replacement, training and use of personal protective equipment, etc. -- Part 2.Petroleum, Chemical Industry, Natural Gas. The purpose is to establish the requirements for personal protective equipment for employers in the petroleum, chemical industry, and natural gas industries. Equipment requirements, identification and assessment of hazards, etc. -- Part 3.Metallurgy and nonferrous metals. The purpose is to establish the requirements for the provision of individual protective equipment, hazards and Identification and evaluation of factors, etc. -- Part 4.Non-coal mines. The purpose is to establish the requirements for individual protective equipment for employers in the non-coal mining industry, the factors affecting the hazards, and the Identification and evaluation of factors, etc. --Part 5.Building materials. The purpose is to establish the requirements for individual protective equipment and identification of hazard factors for employers in the building materials industry. and evaluation, etc. -- Part 6.Electricity. The purpose is to establish the requirements for individual protective equipment and identification of hazard factors for employers in the power industry. and evaluation, etc. -- Part 7.Electronics. The purpose is to establish the requirements for individual protective equipment and identification of hazard factors for employers in the electronics industry. and evaluation, etc. -- Part 8.Ships. The purpose is to establish the requirements for individual protective equipment and identification of hazard factors for employers in the shipbuilding industry. and evaluation, etc. --Part 9.Automobiles. The purpose is to establish the requirements for individual protective equipment and identification of hazard factors for employers in the automobile industry. and evaluation, etc. -- Part 10.Machinery. The purpose is to establish the requirements for individual protective equipment and identification of hazard factors for employers in the machinery industry. and evaluation, etc. -- Part 11.Subway. The purpose is to establish the requirements for individual protective equipment for employers in the subway industry and the identification of hazard factors. and evaluation, etc. -- Part 12.Construction. The purpose is to establish the requirements for individual protective equipment and identification of hazard factors for employers in the construction industry. and evaluation, etc. The provision of personal protective equipment is based on the full identification and assessment of the hazards of specific jobs. The hazards faced by different types of work vary greatly. Therefore, they are compiled into separate documents according to different industries, which together constitute the personal protective equipment in my country. In the future, more industries will be included in due course according to the situation to further improve the management of personal protective equipment in my country. Standard system. Specifications for personal protective equipment Part 9.Automobile1 ScopeThis document specifies the overall requirements for personal protective equipment for each employer in the automotive industry, the identification and evaluation of hazard factors, and individual Requirements for the provision of protective equipment. This document applies to the provision and management of individual protective equipment by employers in the automotive industry. This document does not apply to the provision and management of personal protective equipment for firefighting by employers in the automotive industry.2 Normative referencesThe contents of the following documents constitute the essential clauses of this document through normative references in this document. For referenced documents without a date, only the version corresponding to that date applies to this document; for referenced documents without a date, the latest version (including all amendments) applies to This document. GB 39800.1-2020 Specification for personal protective equipment Part 1.General3 Terms and definitionsThe terms and definitions defined in GB 39800.1-2020 apply to this document.4 General requirementsThe principles, management and procedures for the provision of personal protective equipment shall be implemented in accordance with the provisions of GB 39800.1-2020.5 Identification and assessment of hazard factorsEmployers should combine the characteristics of production safety in the automotive industry and implement safety management in their production processes in accordance with the requirements of 4.2 of GB 39800.1-2020. The employer may identify and assess the hazards that may be involved in the work according to the work categories listed in Table 1, or refer to Appendix A. Identify the hazard factors for the listed jobs, conduct hazard assessment on the identified hazard factors, and use this as a basis for selecting appropriate personal protective equipment. The basis for preparation. Table 1 Main types of work, possible types of accidents or injuries, and applicable personal protective equipment Existence of objects Falling, impact Homework Objects falling or sideways There may be objects on Hit the job Object strike, Lifting injuries, etc. TB⁃01 Safety Helmet TB⁃03 Anti-collision cap a YM-04 Occupational eye and face protection SF⁃08 Mechanical Hazard Protection Gloves ZB⁃01 Safety Shoes ZL-09 Safety Net Lifting, stamping, etc. There is falling object Operation Serial Number Job Category Description Possible Causes Examples of personal protective equipment for accidents or injuries ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB 39800.9-2024_English be delivered?Answer: Upon your order, we will start to translate GB 39800.9-2024_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB 39800.9-2024_English with my colleagues?Answer: Yes. The purchased PDF of GB 39800.9-2024_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |
