GB 31657.3-2022 English PDF

US$219.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB 31657.3-2022: (National food safety standards-Determination of cephalosporin residues in bee products-Liquid chromatography-tandem mass spectrometry)
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB 31657.3-2022	219	Add to Cart	3 days	(National food safety standards-Determination of cephalosporin residues in bee products-Liquid chromatography-tandem mass spectrometry)	Valid

Similar standards

GB 31650.1   GB/T 37517   GB/T 30636   GB 31656.14   GB 31657.2   GB 31657.1   

Basic data

Standard ID: GB 31657.3-2022 (GB31657.3-2022)
Description (Translated English): (National food safety standards-Determination of cephalosporin residues in bee products-Liquid chromatography-tandem mass spectrometry)
Sector / Industry: National Standard
Classification of Chinese Standard: X04
Word Count Estimation: 11,184
Date of Issue: 2022-09-20
Date of Implementation: 2023-02-01
Issuing agency(ies): National Health Commission of the People's Republic of China, State Administration for Market Regulation

GB 31657.3-2022: (National food safety standards-Determination of cephalosporin residues in bee products-Liquid chromatography-tandem mass spectrometry)

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
National Health Commission of the People's Republic of China National Food Safety Standards Determination of cephalosporin residues in bee products Liquid Chromatography-Tandem Mass Spectrometry National Standards of People's Republic of China release State Administration for Market Regulation Ministry of Agriculture and Rural Affairs of the People's Republic of China Replacing GB/T 22942-2008

foreword

This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for Standardization Work Part 1.Structure and Drafting Rules for Standardization Documents" drafting. This document replaces GB/T 22942-2008 "Residues of cefazolin, cefapirin, cephalexin, cefuronine and cefquinome in honey Determination of liquid chromatography-tandem mass spectrometry». Compared with GB/T 22942-2008, except for structural adjustments and editorial changes, the main changes as follows. --- The standard text format is changed to the national food safety standard text format; --- The detection of royal jelly and royal jelly freeze-dried powder has been added to the scope of the standard; --- Increase the number of drug varieties in the standard range; ---Standard sensitivity is further improved. The release status of previous versions of this document and the documents it replaces are as follows. ---GB/T 22942-2008. National Food Safety Standards Determination of cephalosporin residues in bee products by liquid chromatography-tandem mass spectrometry

1 Scope

This document specifies the cephalexin, cephradine, cefazolin, cefoperazone, cefacetonitrile, and cephalexin in honey, royal jelly and royal jelly freeze-dried powder. Sample preparation and liquid chromatography-tandem mass spectrometry method for detection of spirulina, cefuroxime, cefquinoxime and cefotaxime residues. This document is applicable to cephalexin, cephradine, cefazolin, cefoperazone, cefacetonitrile, cephalexin in honey, royal jelly and royal jelly freeze-dried powder Detection of spirulina, cefuroxime, cefquinoxime and cefotaxime residues.

2 Normative references

The content in the following documents constitutes the essential clauses of this document through the normative references in the text. Among them, the dated references For documents, only the version corresponding to the date is applicable to this document; for undated reference documents, the latest version (including all amendments) is applicable to this document. GB/T 6682 Analytical laboratory water specifications and test methods

3 Terms and Definitions

This document does not have terms and definitions that need to be defined.

4 principles

The residual cephalosporins in the sample were extracted by phosphate buffer solution, purified by hydrophilic-lipophilic equilibrium solid-phase extraction column, and liquid chromatography-tandem mass Determination by spectrometry, quantification by matrix calibration external standard method.

5 Reagents and materials

Unless otherwise specified, all reagents are of analytical grade, and the water is first-class water in accordance with GB/T 6682. 5.1 Reagents 5.1.1 Methanol (CH3OH). chromatographically pure. 5.1.2 Acetonitrile (CH3CN). chromatographically pure. 5.1.3 Formic acid (HCOOH). chromatographically pure. 5.1.4 Potassium dihydrogen phosphate (KH2PO4). 5.1.5 Sodium Hydroxide (NaOH). 5.2 Solution preparation 5.2.11 2.5mol/L sodium hydroxide solution. take 50g of sodium hydroxide, add water to dissolve and dilute to 500mL. 5.2.2 30% acetonitrile solution. Take 30mL of acetonitrile and dilute with water to 100mL. 5.2.3 0.05mol/L phosphate buffer solution (pH=8.5). Take 6.8g of potassium dihydrogen phosphate, dissolve it in water and dilute it to 1000mL, and use 2.5 mol/L sodium hydroxide solution to adjust the pH to 8.5. 5.2.4 0.1% formic acid solution. Take 1mL of formic acid, dissolve it in water and dilute to 1000mL. 5.2.5 0.1% formic acid solution-methanol. Take 95 mL of 0.1% formic acid solution, add 5 mL of methanol, and mix well. 5.3 Standards Cefalexin, cephradine, cefazolin, cefoperazone, cefacetonitrile, cefapirin, deacetylcefapirin, cefaroning, cefquinone oxime and cefotaxime, the content of which was ≥95.0%, see Appendix A for specific information. 5.4 Preparation of standard solution 5.4.1 Standard stock solution. Take 10 mg of each standard product, weigh them accurately, add an appropriate amount of 30% acetonitrile solution to dissolve and dilute to a 25 mL volumetric flask, It was prepared into a solution with a concentration of 400 μg/mL. It was stored in the dark below -18 ℃, and the validity period was 1 month. 5.4.2 Mixed standard stock solution. Accurately pipette 0.25mL of each standard stock solution into a 10mL volumetric flask, dilute with 30% acetonitrile solution To the mark, it was prepared into a mixed standard stock solution with a concentration of 10 μg/mL. Stored in the dark below -18°C, the validity period was 7 days. 5.4.3 Mixed standard working solution. Accurately pipette an appropriate amount of mixed standard stock solution, and dilute it with 0.1% formic acid solution-methanol to a concentration of 2.5μg/L, 5.0μg/L, 20μg/L, 100μg/L,.200μg/L and 500μg/L series mixed standard working solutions. Ready to use. 5.5 Materials 5.5.1 Solid-phase extraction cartridge. hydrophilic-lipophilic balanced solid-phase extraction column, 500mg/6mL, or equivalent. 5.5.2 Filter membrane. made of nylon, with a pore size of 0.22 μm or equivalent.

6 Instruments and equipment

6.1 Liquid chromatography-tandem mass spectrometer. with electrospray ion source. 6.2 Analytical balance. Sensitivity 0.00001g and 0.01g. 6.3 Nitrogen blowing instrument. 6.4 Solid phase extraction device. 6.5 Vortex mixer. 6.6 Centrifuge. The maximum speed is 6000r/min or above. 6.7 Centrifuge tube. polypropylene plastic centrifuge tube, 10mL, 50mL. 6.8 pH meter.

7 Preparation and storage of samples

7.1 Preparation of samples Take an appropriate amount of fresh or refrigerated blank or test bee products, if there is no crystallization, stir it evenly, if there is crystallization, place it at no more than 60°C Warm in a water bath, oscillate, stir evenly after the sample is completely melted, and cool to room temperature. Royal jelly and royal jelly freeze-dried powder are taken out from the frozen environment, Samples were taken after stirring. a) Take the uniform test sample as the test sample; b) Take the uniform blank sample as the blank sample; c) Take the homogeneous blank sample, add the standard working solution of appropriate concentration, and add the sample as a blank. 7.2 Storage of samples Store below -18°C.

8 Measurement steps

8.1 Extraction 8.1.1 Honey Take 5g of the sample (accurate to ±0.05g), put it in a 50mL centrifuge tube, add 25mL of 0.05mol/L phosphate buffer solution, dissolve the sample, After vortex mixing, the pH was adjusted to 8.5 with 2.5 mol/L sodium hydroxide solution, and set aside. 8.1.2 Royal jelly and royal jelly freeze-dried powder Take 2.5g (accurate to ±0.05g) of royal jelly or 1.0g (accurate to ±0.05g) of royal jelly freeze-dried powder in a 50mL centrifuge tube, Add 25 mL of 0.05 mol/L phosphate buffer solution, vortex and mix well, adjust the pH to 8.5 with 2.5 mol/L sodium hydroxide solution, and Centrifuge at 6000r/min for 5min, take the supernatant, and set aside. 8.2 Purification Take the solid-phase extraction column, activate it with 5 mL of methanol and 10 mL of 0.05 mol/L phosphate buffer solution successively, take the spare solution, pass it through the column, and wait until the liquid level When reaching the surface of the column bed, rinse with 3 mL of phosphate buffer solution and 2 mL of water in sequence, and discard all the effluent. Elute with 3 mL of acetonitrile, Collect the eluate in a 10 mL centrifuge tube, dry the eluate in a 40°C water bath with nitrogen, add 0.1% formic acid solution-1.0 mL of methanol to dissolve, and 0.22 μm filter membrane for liquid chromatography-tandem mass spectrometry. 8.3 Preparation of matrix-matched standard curve Take the blank sample and treat it according to 8.1 and 8.2 in turn, dry it with nitrogen in a water bath at 40°C, and add 1.0 mL of a series of mixed standard working solutions to dissolve it. The solution residue was passed through a 0.22 μm filter membrane to prepare a series of bases of 2.5 μg/L, 5.0 μg/L, 20 μg/L, 100 μg/L,.200 μg/L and 500 μg/L Mass matching standard working solution for liquid chromatography-tandem mass spectrometry determination. Take the peak area of the quantitative ion pair as the ordinate, and the concentration of the standard solution as the abscissa Draw the standard curve. Find the regression equation and correlation coefficient. 8.4 Determination 8.4.1 Reference conditions for liquid chromatography a) Chromatographic column. C18 chromatographic column (100mm×2.1mm, 1.7μm) or equivalent; b) Mobile phase. A is 0.1% formic acid solution, B is methanol, and the gradient elution program is shown in Table 1; c) Flow rate. 0.3mL/min; d) Column temperature. 35°C; e) Injection volume. 10 μL. 8.4.2 Reference conditions for mass spectrometry a) Ion source. Electrospray (ESI) ion source; b) Scanning mode. positive ion scanning; c) Detection method. multiple reaction monitoring (MRM); d) Capillary voltage..2000V; e) RF lens voltage. 0.5V; f) Ion source temperature. 150°C; g) Desolvation temperature. 500°C; h) Cone gas flow rate. 50L/h; i) Desolvation gas flow rate. 1000L/h; j) Secondary collision gas. argon; k) See Table 2 for qualifier ion pairs, quantifier ion pairs, collision energy and cone voltage. 8.4.3 Assay Take the sample solution and the matrix-matched standard solution for single-point or multi-point calibration, and use the external standard method to quantify the chromatographic peak area. The matrix-matched standard solution The characteristic ion mass chromatographic peak area of the target drug in the solution and the sample solution should be within the linear range of the instrument detection. The ratio of the retention time of the substance to the retention time of the substance to be tested in the matrix matching standard working solution, the deviation is within ±2.5%, and the sample solution Compared with the relative abundance of ions in the matrix-matched standard solution, if they meet the requirements in Table 3, it can be determined that there is a pair of ions in the sample. The corresponding substances to be tested. See Appendix B for the MRM chromatogram of the standard solution. 8.5 Blank test Take the blank sample, except that no drug is added, the same measurement steps are used for parallel operation.

9 Calculation and presentation of results

The residual amount of the drug to be tested in the sample was calculated according to the standard curve or formula (1). 10 Sensitivity, accuracy and precision of detection method 10.1 Sensitivity In this method, the detection limits of cefoperazone, cefacetonitrile and cefazolin in honey, royal jelly and royal jelly freeze-dried powder are respectively 2.0 μg/kg, 4.0 μg/kg and 10 μg/kg, the limits of quantitation were 4.0 μg/kg, 8.0 μg/kg and 20 μg/kg respectively; other cephalosporins The limits of detection for honey, royal jelly and royal jelly freeze-dried powder were 0.5 μg/kg, 1.0 μg/kg and 1.0 μg/kg, respectively. 2.5 μg/kg, the limits of quantitation were 1.0 μg/kg, 2.0 μg/kg and 5.0 μg/kg, respectively. 10.2 Accuracy The recoveries of this method were 60%-120% at the spiked concentration levels of 1.0 μg/kg-40 μg/kg. 10.3 Precision The intra-assay relative standard deviation of this method was ≤15%, and the inter-assay relative standard deviation was ≤20%. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB 31657.3-2022_English be delivered?

Answer: Upon your order, we will start to translate GB 31657.3-2022_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB 31657.3-2022_English with my colleagues?

Answer: Yes. The purchased PDF of GB 31657.3-2022_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.