GB 28010-2011 English PDFUS$369.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB 28010-2011: [GB/T 28010-2011] Hongmu furniture -- General technical requirements Status: Valid
Basic dataStandard ID: GB 28010-2011 (GB28010-2011)Description (Translated English): [GB/T 28010-2011] Hongmu furniture -- General technical requirements Sector / Industry: National Standard Classification of Chinese Standard: Y80 Classification of International Standard: 97.140 Word Count Estimation: 14,176 Date of Issue: 2011-10-31 Date of Implementation: 2012-08-01 Quoted Standard: GB/T 3324-2008; GB 5296.6; GB 6566-2010; GB 7189; GB/T 14703; GB/T 17526-2008; GB 17927.1; GB/T 18107-2000; GB 18401-2010; GB 18584; GB 20400-2006; QB/T 2385 Regulation (derived from): Announcement of Newly Approved National Standards No. 15 of 2011 Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This Chinese standard specifies the terms and definitions of mahogany furniture, product naming and classification, main dimensions, requirements, quality express, test methods, inspection rules, marking, instructions for use, packaging, transportation and storage. This standard applies to mahogany furniture products, production and circulation. This standard does not apply to children's furniture. GB 28010-2011: [GB/T 28010-2011] Hongmu furniture -- General technical requirements---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.Hongmu furniture.General technical requirements ICS 97.140 Y80 National Standards of People's Republic of China Mahogany furniture general technical conditions Issued on. 2011-10-31 2012-08-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released Table of ContentsIntroduction Ⅲ Introduction Ⅳ 1 Scope 1 2 Normative references 1 3 Terms and definitions 4 Product Nomenclature and Classification 2 5 main dimensions 3 6 Requirement 3 7 mass EXPRESS 4 Test Method 8 6 9 7 inspection rules 10 logo, instructions for use, packaging, transportation and storage 8 Appendix A (informative) wooden furniture main dimensions 9ForewordThe standard Chapter 4 of 4.1,4.2.1 and Chapters 6 and 7 are mandatory, others are recommended. This standard was drafted in accordance with GB/T 1.1-2009 given rules. Please note that some of the content of this document may involve patents. Release mechanism of the present document does not assume responsibility for the identification of these patents. Since the date of implementation of this standard six months to stop selling on the market do not meet this standard. The standard proposed by China National Light Industry Council. This standard by the National Standardization Technical Committee furniture (SAC/TC480) centralized. This standard is mainly drafted by. Zhongshan Hongfa Furniture Co., the National Furniture Product Quality Supervision and Inspection Center (Guangdong), Shanghai Quality and Technical Supervision and Inspection Institute, Zhejiang mid-Hung Industrial Co., Ltd., Shanghai Airlines Redwood Furniture Co., Ltd., Beijing Yuan Henry hardwood home Co., Ltd, Beijing Long Shun Cheng Chinese furniture factory in Jiangsu were good craft furniture Co., Ltd., Fujian Sanford Classical Furniture Co., Shenzhen Cheung Lee Technology Furniture Co., Ltd. Changshu City, east mahogany furniture. Participated in the drafting of this standard. red Gagosian Zhongshan Furniture Co., Ng Hing Takaaki Furniture Co., Ltd., Beijing Bank line of furniture Co., Ltd. Xianghe in Tang home city, Xi'an Yaju Redwood Court, Zhongshan City, industry and Habitat Furniture Co., Ltd., Tai Chung Town, Zhongshan City, Tai Hing Furniture Factory, Shandong Fukuo Furniture Co., Ltd., Zhongshan City CHIDEAN Habitat Furniture Co., Ltd. Changshu East of mahogany furniture Xianyou tribute Xuan Classical Furniture Co., Ltd. Changshu City, the bat Technology Furniture Co., Xianyou County Snapshots Classical Furniture Co., Ltd. Shanghai Jin Xiang Technology Furniture Co., Hysen this Redwood Furniture Co., Ltd. Xianyou county nostalgia Classical Furniture Co., Ltd., Shanghai weeks old mahogany furniture Limited Division of Xianyou dam Pearl Classical Furniture Co., Ltd. Shanghai Yuanyuan red mahogany furniture ring Mu Wood (Shanghai) Co., Ltd., Beijing Wang Wen Boya traditional hardwood furniture Co., furniture and industrial design College, Guangxi University, College of Forestry, South China Agricultural University, Nanjing Forestry University, Habitat Xi'an Jiaotong University, Xi'an Institute of lacquer paint, Zhongshan City of Quality and Technical Supervision, Zhongshan Exit Inspection and Quarantine, Guangdong Mahogany furniture and office furniture Supervision, Inspection Station, Zhongshan City freshman Paint Co., Ltd., Zhongshan City, mahogany furniture, engineering and technology research and development centers, Fujian classical furniture Association, Guangdong Timber Industry Association. The main drafters of this standard. Cao Xinmin, Hailing Chao, Wu Zhihui, Liu Yao country, Liangde Pei, Wang Hongjiang, Tian Yanbo, Xu Feng, Jin Zhang Xi, Dai Aiguo, More Chen Zhong Guo Qiong, NIU Xiao Ting, Huang Junhao, Zhu Ping, Bao Tian Wei, ZHANG Fei, Zhang Zhihui, Xu Ruisheng.IntroductionMahogany furniture in all types of wood furniture is to use the longest durability, the most representative of traditional Chinese furniture, which combines history from Ming has hardwood furniture tenon bonding process, carvings, moldings craft, mosaics, save side (panel) process, lacquer craft, hot wax work Arts, rattan craft, finishing processes, technology, and other decorative pieces of metal, a concentrated expression of the essence of traditional craftsmanship and outstanding decorative arts, when Traditional craft furniture today in the world of furniture products with distinctive Chinese national characteristics of a class of products. "There take the degree, use it with restraint," it is the basic principle of today's mahogany furniture material. In carrying forward the tradition on the basis of this standard based on the combination and development of traditional skills and contemporary wood science and technology. Mahogany furniture general technical conditions1 ScopeThis standard specifies the terms and definitions mahogany furniture, product naming and classification, main dimensions, requirements, quality express, test methods, inspection Rules, labeling, instructions for use, packaging, transportation and storage. This standard applies to mahogany furniture products, the production and circulation. This standard does not apply to children's furniture.2 Normative referencesThe following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document. GB/T 3324-2008 wood furniture general technical conditions GB 5296.6 consumer use - Part 6. Furniture GB 6566-2010 construction materials radionuclide limited GB 7189 food with paraffin GB/T 14703 Lacquer GB/T 17526-2008 polish Assessment - Part 1 GB 17927.1 mattresses and upholstered furniture sofas resistance to ignition. smoldering cigarette GB/T 18107-2000 Redwood GB 18401-2010 National Textile Product General Safety Technical Code GB 18584 interior decoration materials, wooden furniture of harmful substances GB 20400-2006 Leather and Fur harmful substances QB/T 2385 luxurious dark hardwood furniture3 Terms and DefinitionsGB/T 18107 and defined by the following terms and definitions apply to this document. 3.1 Mahogany furniture Hongmufurniture Traditional Chinese hardwood furniture production process, made a mahogany furniture products. 3.2 Timber sawntimber After sawing logs obtained by processing natural wood plates and Lumber. 3.3 Mahogany upholstered furniture Hongmuupholsteredfurniture Mahogany furniture with a soft backrest, cushion (cushion or mattress), soft seat with armrests bag and bedding. 3.4 Mahogany furniture upholstering Hongmucoatedfurniture Using high-quality natural wood lumber as the base material, the outer clad mahogany furniture sheet (thickness not less than 6mm) processed into. Note. The coating process from the Qing Dynasty, is different from today's modest wooden cladding (ornaments) Face Technology. 3.5 Lacquer Chineselacquer Sumac from skin tapping natural resins, natural finishing materials mainly by urushiol, laccase gum trees and other components of the lacquer used for refining Classical furniture, lacquer handicraft like painted decoration. NOTE. Also known as lacquer paint countries, lacquer, soil paint, paint the mountain. 3.6 Lacquer craft Chineselacquerprocess Refined decorative objects as raw lacquer surface processes. 3.7 Wipe painted wipeChineselacquer With cotton, silk and other materials group dipped wipe the surface of objects of refined lacquer painted process. NOTE. wipe wipe finger paint and painted, rubbed paint. 3.8 Artificial drying artificialdrying; artificialseasoning Under controlled conditions for wood drying medium is dried. [GB/T 15035-2009, the definition 2.5] 3.9 Product Warranty document productguaranteedocuments Quality mahogany furniture manufacturers or distributors to consumers to submit proof of the use of safety and product manufacturing processes, service assurance and other information Technical documents in general.4 Product Nomenclature and Classification4.1 Product Naming 4.1.1 by species name Mahogany wood furniture products are mainly used by the species name (scientific name) is named, should be named the following four components and order. Chinese timber species name with several timber species Latin name product varieties products Example 1. black rosewood (Dalbergiafusca) three-piece Royal Palace chair Example 2. African Wenge (Millettialaurentii) mahogany sofa Liu Jiantao NOTE. It is recommended as indicated in the main timber species named in origin. 4.1.2 Press timber name When the timber species difficult to identify and name identification, mahogany wood furniture should be the name of the main timber to be named by name under Column four parts and order. Timber Wood Latin genus name Product name Number of product variety Example 1. (. Pterocarpusspp) rosewood three-piece Royal Palace chair Example 2. (. Dalbergiaspp) black rosewood Qi Jiantao dinette NOTE. It is recommended as far as possible indicate the main timber in the naming of the origin of the wood. 4.2 Categories 4.2.1 Classification according to the proportion of timber products According to the proportion of the product timber, mahogany furniture can be divided into the following four categories (××× indicates a species name, □□□ indicates the name of a timber). 4.2.1.1 Full ××× furniture It refers to the product of all the wooden parts, except glass pallets and pallets pressure lines, all ××× lumber. Example. Full Cochin rosewood furniture (in Cochin Dalbergia example). All wooden parts of the product, except glass pallets and pallets pressure lines, all Cochin rosewood (Monoculture) sawn timber. 4.2.1.2 Full □□□ furniture It refers to the product of all the wooden parts, except glass pallets and pallets pressure lines, all □□□ sawn timber. Example. black rosewood furniture (black rosewood example). All wooden parts of the product, except glass pallets and pallets pressure lines, all black rosewood (The name of a single timber wood) sawn timber. 4.2.1.3 ××× or □□□ furniture Refers to the product and the appearance of the main parts of the visual parts of the wooden parts are ××× or □□□ sawn timber, inside and shelter can The use of other high-quality hardwood sawmills. Example. Cochin rosewood furniture (in Cochin Dalbergia an example). Product main part and the outer parts of the wooden parts are visually Cochin rosewood sawn timber, internal and hidden At the shelter may be other quality hardwood sawmills. 4.2.1.4 ××× □□□ or furniture upholstering Refers to the product of high quality hardwood sawn timber to the substrate, or outer covering ××× □□□ sheet (thickness not less than 6mm). Example. Cochin rosewood furniture covered (in Cochin Dalbergia example). Products of high quality hardwood sawn timber to the substrate, the outer coating Cochin rosewood sheet (thickness not less than 6mm). 4.2.2 Classification according to product features Mahogany furniture can be divided into. Stools Chairs, desk case category, class cabinet, couch class, screen, seat type, gantry type, other classes. 4.2.3 by product using the occasion categories Mahogany furniture can be divided into. class bedroom, living room type, class dining room, study, office category, other classes.5 Main dimensionsProduct design, to meet the type of structure, artistic design, decorative products based on the main dimensions, see Appendix A. Special size requirements The two sides agreed to perform the contract.6 Requirements6.1 General 6.1.1 mahogany furniture product naming, furniture, timber EXPRESS, furniture trade activities should be properly referenced timber name GB/T 18107 given He said the Chinese species name, wood Latin genus name, species Latin name, trade name abroad. 6.1.2 This standard specifies the quality mahogany furniture should express card on the quality of specific products will be express. 6.1.3 mahogany furniture should have product assurance documents. Warranty document should include the product manual, product quality mahogany furniture Express card, product certification. 6.1.4 to submit the appropriate documents to ensure that the product should be delivered products. 6.1.5 Product assurance documentation should be prepared sets of products, single product exception. Regular file should be printed (the number of products came recoverable With print), the paper should be durable. 6.1.6 ensure the preparation of product file shall comply with the provisions of GB 5296.6. Character 6.1.7 Product assurance documents used by the country should be officially published specifications simplified. Warranty document should not be arbitrarily altered. 6.2 timber requirements 6.2.1 Production timber before put into use, the name of the wood should be recognized. Wood could not confirm the correct name should be identified timber identification, Its expert conclusion only as a business use and express product timber basis. 6.2.2 When the product is due to enter the timber dispute forensic subject product should have the appropriate product manual, product quality mahogany furniture Volume express card, product certification. 6.2.3 product timber and product quality should express card express or wood species name and use of the site is consistent. 6.2.4 product should artificial wood drying, wood moisture content should be 8% to 16%. 6.2.5 Wood products can be used sapwood. Use sapwood should perform QB/T 2385 in the process requirements, scope of use. 6.2.6 Timber should moth insecticide and repair process should not be used still live insects attack wood. 6.2.7 other wood products and decorative interior parts used (such as camphor, boxwood, etc.) should be consistent with GB/T 3324-2008 Table 4 sequence Provisions 1 to 6. 6.3 Product Safety 6.3.1 hand, the body can reach areas should be smooth, smooth, no glitches, furniture edge, edge, corner site should be rounded chamfer. 6.3.2 1m following parts, there should be no sharp projections overall shape; class of openwork decoration design should take into account possible of children stuck hands, feet The possibility of easily playing children, but misuse may endanger the safety of products such as drum stool, should express card product to product quality Safety tips for users. 6.3.3 harmful substances shall comply with the requirements of GB 18584. 6.3.4 The use lacquer quality should meet GB/T 14703 requirements. 6.3.5 wax coating paint total arsenic and lead should be consistent with GB/T 17526-2008 requirements. 6.3.6 Finishing with a fused ring aromatic paraffin GB 7189 shall comply with the requirements of food packaging paraffin. 6.3.7 mahogany upholstered furniture software components shall comply with the anti-cigarette ignition of GB 17927.1 requirements. Decorative natural stone 6.3.8 application process, which should be consistent with radionuclide limits in GB 6566-2010 Class A requirements. 6.3.9 1m following parts, furniture, copper ornaments should not have a separate plug-ins (eg plug with a tag on the door). Using the floating installation method and copper nails Copper clad wood decorative trim edge surface of the furniture should be tight fitting and should not tilt. 6.3.10 suspected of using aqueous solution boiling wood drying method for treating wood, such as the use of paraffin oil, paraffin should be used for food, and shall comply with the GB 7189 in paraffin food packaging requirements. 6.3.11 mahogany upholstered furniture formaldehyde content in textiles and decomposable aromatic amine dyes should be consistent with GB 18401-2010 in class C Claim. 6.3.12 mahogany upholstered furniture in leather and fur of harmful substances should be consistent with GB 20400-2006 in Class C requirements. 6.3.13 use glass products, artificial stone, soft foam furniture components and other materials and wood adhesives, bleaching agents, coloring agents and materials When the material, its use should be considered in the safety and material content of harmful substances, volatile organic content, etc., shall comply with the relevant safety Standards, quality standards.7 mass EXPRESS7.1 General 7.1.1 mahogany furniture sales contract should refer to product assurance documents (product manual, mahogany furniture product quality express card production Product certification). 7.1.2 mahogany furniture quality express card should expressly include at least. product performance standards; Categories; product name; product type Number, size; production date; scope of products; products are mainly timber; product finishing process; product decoration technology; safety tips; product warranty; Delivery party information (manufacturer or dealer information). 7.1.3 product without special technical requirements, the scope of products in 7.1.2, safety tips, product warranty may be content to use products Book for versatility express. 7.1.4 mahogany furniture quality express card expressed content should be consistent with the actual product. 7.2 express requirements 7.2.1 mahogany furniture quality express card (hereinafter referred to as express card) prepared in four parts, you expressly header portion of the card, express card Part 1, Part 2 and Part 3. Express card header section should include at least the following. a) manufacturers or dealers registered trademark logo (factory standard or enterprise). b) express card name --- mahogany furniture product quality express card (horizontal writing, in English tied up and down). c) express card ID. accordance with the first year after the card number written in the order, such as. 20,100,293. 7.2.2 Part 1 express card should at least include the following. the implementation of standard products; Categories; product name; product model; Products Specifications; production date; the scope of products. This section should be more explicit word order, and meet the following requirements. a) Products shall be in accordance with 4.2.2 and 4.2.3 are given free to choose. b) Production of furniture internal model, series, number, etc. can only be classified as a product model explicit use and are not as specific Name of the product. c) according to the proportional timber, use the function, using the name mahogany furniture Categories occasion should not be made as a specific product name. d) Specifications shall be the actual size (mm) label, the first label set of furniture under the conditions of use of a minimum area of long, wide feet Inch, then a single piece of furniture label length, width, height (or width, depth, height) dimension. e) Product name shall be given in accordance with the requirements of 4.1 consists of four parts are arranged in a predetermined order, in which the name of the timber shall comply with 6.1.1 Requirements. 7.2.3 Part 2 express card should at least include the following. Product main timber; product finishing process; product decoration technology. This section The above text should express order. 7.2.3.1 The main product timber EXPRESS It should express the proportion of product timber and timber name. Of timber should increase the proportion of different products expressly specified below. a) single species of timber furniture should be expressed f......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB 28010-2011_English be delivered?Answer: Upon your order, we will start to translate GB 28010-2011_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB 28010-2011_English with my colleagues?Answer: Yes. The purchased PDF of GB 28010-2011_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |
