GB 20464-2024 English PDF

US$519.00 · In stock
Delivery: <= 5 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB 20464-2024: General directive for labelling of agricultural seeds
Status: Valid

GB 20464: Historical versions

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB 20464-2024	519	Add to Cart	5 days	General directive for labelling of agricultural seeds	Valid
GB 20464-2006	519	Add to Cart	4 days	General directive for labelling of agricultural seeds	Valid

Similar standards

GB/T 29371.3   GB/T 29371.5   GB/T 29371.2   GB/T 44618   GB/T 39914   

Basic data

Standard ID: GB 20464-2024 (GB20464-2024)
Description (Translated English): General directive for labelling of agricultural seeds
Sector / Industry: National Standard
Classification of Chinese Standard: B21
Classification of International Standard: 65.020.20
Word Count Estimation: 26,252
Date of Issue: 2024-10-28
Date of Implementation: 2025-10-01
Older Standard (superseded by this standard): GB 20464-2006
Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration

GB 20464-2024: General directive for labelling of agricultural seeds

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
ICS 65.020.20 CCSB21 National Standard of the People's Republic of China Replaces GB 20464-2006 General Principles for Labeling of Crop Seeds Released on 2024-10-28 2025-10-01 Implementation State Administration for Market Regulation The National Standardization Administration issued

Table of Contents

Preface III Introduction IV 1 Scope 1 2 Normative references 1 3 Terms and Definitions 1 4 Marking content 3 4.1 Basic Requirements 3 4.2 General label content 3 4.3 Seed label annotation content 5 4.4 General contents of instructions for use 6 4.5 Instructions for use and content of standardization 7 5 Production Requirements 7 5.1 Basic Requirements 7 5.2 Production form 7 5.3 Printing requirements 8 5.4 Production Specific Provisions 8 6 Usage Supervision 9 6.1 Scope of application of supervision and inspection 9 6.2 Marking conformity check 9 6.3 Seed quality compliance inspection 9 Appendix A (Informative) Checklist for marking content and production requirements 11 Appendix B (Normative) Permissible error compared with the specified value of seed quality 15 B.1 General Principles15 B.2 Variety purity 15 B.3 Germination test17 B.4 Clarity Analysis17 B.5 Moisture 18 References 19 Table 1 Character height of net content of quantitatively packaged seeds 8 Table A.1 Seed label and instructions for use marking and production requirements checklist 11 Table B.1 Elimination values under different sample sizes and variety purity standards (α< 0.05) 16 Table B.2 Permissible difference between test value and specified value 16 Table B.3 Permissible error of germination test compared with specified value 17 Table B.4 Permissible error of clarity analysis compared with specified values 17

Foreword

This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for standardization work Part 1.Structure and drafting rules for standardization documents" Drafting. This document replaces GB 20464-2006 "General Rules for Crop Seed Labelling". Compared with GB 20464-2006, except for structural adjustments and editing In addition to the changes in performance, the main technical changes are as follows. --- Changed the terms and definitions (see Chapter 3, Chapter 3 of the.2006 edition); --- Deleted the general provisions (see Chapter 4 of the.2006 edition); --- Changed the content of seed labels (see Chapter 4, Chapter 5 of the.2006 edition); --- Added the marked content of the instructions for use (see Chapter 4); --- Changed the requirements for seed labels and instructions for use (see Chapter 5, Chapter 6 of the.2006 edition); --- Changed the supervision of use (see Chapter 6, Chapter 7 of the.2006 edition); --- Increased the allowable error compared with the specified value of seed quality (see Appendix B). Please note that some of the contents of this document may involve patents. The issuing organization of this document does not assume the responsibility for identifying patents. This document is proposed and coordinated by the Ministry of Agriculture and Rural Affairs of the People's Republic of China. The previous versions of this document and the documents it replaces are as follows. ---First published in.2006 as GB 20464-2006; ---This is the first revision.

Introduction

The truth-assurance system for crop seed labels and instructions is a basic system that is widely implemented in seed laws around the world. The system establishes three Basic principles. The state shall implement unified labeling and production standards to avoid technical trade barriers; seed producers and operators shall make self-declarations and implement The most economical and effective model; the government organizes and implements market supervision and inspection to ensure that information is disclosed truthfully. GB 20464 is based on the provisions of the Seed Law of the People's Republic of China, the Measures for the Administration of Labels and Instructions for Use of Crop Seeds and other relevant laws and regulations. The regulations provide guidance and guidance on the content, production requirements and use supervision of crop seed labels and instructions. The technical specifications for the safety and operation of seeds should be in place to guide seed producers and operators to strengthen their principal responsibilities, correctly label seed labels and instructions for use, and clearly indicate the information, standardize production behavior; at the same time, clarify the technical support for the scope, content and method of supervision and inspection, and ensure that the information on seed labels and instructions for use is To ensure the true and complete disclosure of information and to ensure the effective implementation of the legal system. This document governs the seed quality standard requirements and formulates mandatory national seed quality standards for important crop seeds as a basis for seed quality. Supplement to quantity labeling requirements. General Principles for Labeling of Crop Seeds

1 Scope

This document specifies the requirements for the labeling content, production and use supervision of crop seed labels and instructions. This document applies to agricultural crop seeds for sale.

2 Normative references

The contents of the following documents constitute essential clauses of this document through normative references in this document. For referenced documents without a date, only the version corresponding to that date applies to this document; for referenced documents without a date, the latest version (including all amendments) applies to This document. GB/T 3543 (all parts) Inspection procedures for crop seeds

3 Terms and definitions

The following terms and definitions apply to this document. 3.1 labeling of seed Text descriptions and specific patterns printed, pasted, fixed or attached to the surface of seeds or seed packaging. Note. Text description refers to the specific description of the marked content, and specific patterns refer to warning signs, certification marks, etc. 3.2 Printed, pasted, fixed or attached to the surface of seeds or seed packaging, used to describe the main characteristics of the varieties of seeds for sale, the main planting Training measures, adaptability and other usage conditions, as well as risk warnings, technical services and other related information. 3.3 Matters that must be marked as required by laws and regulations. Note 1.The specified marking contents are divided into seed label marking contents and instruction for use marking contents. Note 2.The labeling content consists of general labeling content and additional content. General labeling content is the content that each type of seed should be labeled according to legal provisions; The additional annotation content is added on the basis of the general annotation content based on different variety management, seed characteristics and usage requirements. Note 3.The contents of the annotations are divided into approved variety seeds, registered variety seeds, genetically modified variety seeds, authorized variety seeds, and pesticide-treated seeds according to the common types of seeds. Processed seeds, imported seeds, packaged seeds, mixed seeds, certified seeds, etc. 3.4 Quality requirement Reflects the quality characteristics of the seeds being sold, such as sowing, variety, health, and their characteristic values. Note 1.Quality characteristics vary with different seed types. Pay attention to the distinction between mandatory and recommended regulations. Note 2.The expression of characteristic values may be qualitative, quantitative, or a combination of qualitative and quantitative. Note 3.In actual practice, characteristic values, especially quantitative characteristic values, are divided into specified values of national standards and test values of seed inspection. estimatedvalue), the annotated value of the seed tag (statedvalue). ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB 20464-2024_English be delivered?

Answer: Upon your order, we will start to translate GB 20464-2024_English as soon as possible, and keep you informed of the progress. The lead time is typically 3 ~ 5 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB 20464-2024_English with my colleagues?

Answer: Yes. The purchased PDF of GB 20464-2024_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version GB 20464-2024?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB 20464-2024 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.