GB 19433-2009 English PDFUS$649.00 · In stock
Delivery: <= 5 days. True-PDF full-copy in English will be manually translated and delivered via email. GB 19433-2009: Safety code for inspection of packaging of dangerous goods transported by air Status: Valid GB 19433: Historical versions
Basic dataStandard ID: GB 19433-2009 (GB19433-2009)Description (Translated English): Safety code for inspection of packaging of dangerous goods transported by air Sector / Industry: National Standard Classification of Chinese Standard: A88 Classification of International Standard: 13.300; 55.020 Word Count Estimation: 28,296 Date of Issue: 2009-06-21 Date of Implementation: 2010-05-01 Older Standard (superseded by this standard): GB 19433.1-2004; GB 19433.2-2004; GB 19433.3-2004 Quoted Standard: GB 325; GB/T 1540; GB/T 2828.1-2003; GB/T 4122.1; GB/T 4857.3; GB/T 4857.5; GB/T 17344; ICAO " Safe Transport of Dangerous Goods by Air Technical Regulations "; United Nations. " recommendations on the Transport of Dangerous Goods model Regulations " (15 revision) Regulation (derived from): Announcement of Newly Approved National Standards No. 8, 2009 (No. 148 overall) Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This Chinese standard specifies the classification in addition to Chapter 4 Section 2, Class 6. 2, Class 7 packages of dangerous goods by air outside of the classification codes and markings, requirements, performance testing, the use of identification. This standard applies in Chapter 4 of the first two categories, Class 6. 2, Class 7 dangerous goods by air outside of the performance testing and use of identification. GB 19433-2009: Safety code for inspection of packaging of dangerous goods transported by air---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.Safety code for inspection of packaging of dangerous goods transported by air ICS 13.300; 55.020 A80 National Standards of People's Republic of China Replacing GB 19433.1-2004, GB 19433.2-2004, GB 19433.3-2004 Inspection of packaging of dangerous goods by air safety norms Posted 2009-06-21 2010-05-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released ForewordThe standard Chapter 5, Section 6, Chapter 7 and Chapter 8 are mandatory, the rest are recommended. This standard replaces GB 19433.1-2004 "inspection of packaging of dangerous goods by air safety norms General", GB 19433.2-2004 "empty Packaging of dangerous goods transport safety regulations test performance test "and GB 19433.3-2004" inspection of packaging of dangerous goods by air safety norms Use appraisal. " This standard is mainly to modify the contents of the above criteria. --- On the part of the technical content has been modified so that it and the United Nations "on the Recommendations on the Transport of Dangerous Goods Model Regulations" (15 repair Revised Edition), ICAO (ICAO) "Safe Transport of Dangerous Goods Aviation Technical Regulations" (2007-2008 edition) and the International Air Fully consistent Association (IATA) promulgated the "Carriage of Dangerous Goods Safety Technical Code" (2008 edition) about the technical content; --- On a standard text format according to GB/T 1.1-2000 made editorial changes. The Standard Annexes A and B are normative appendix. This standard Appendices C and D are informative appendices. This standard is managed by the National Standardization Technical Committee chemicals dangerous (SAC/TC251) and focal points. This standard is drafted by. Tianjin CIQ. Participated in the drafting of this standard. Hunan CIQ. The main drafters of this standard. Wangli Bing, Lining Tao, Feng Chi Yu, Lu Gang, Zhang Yuan, Lei Zhou. This standard replaces the standards previously issued as follows. --- GB 19433.1-2004; --- GB 19433.2-2004; --- GB 19433.3-2004. Inspection of packaging of dangerous goods by air safety norms1 ScopeThis standard specifies the classification in addition to Chapter 4, category 2, Section 6.2, Class 7 other than the packaging of dangerous goods by air classification, code, and Marking, requirements, performance testing, the use of identification. This standard applies to Chapter 4, in addition to the classification of Class 2, 6.2, Class 7 other than the packaging of dangerous goods by air and make the performance test With identification. This standard does not apply to a volume of more than 450L, net weight of more than 400kg of packaging of dangerous goods by air test.2 Normative referencesThe following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard. GB 325 packaging containers steel drums GB/T 1540 absorbent paper and cardboard assays Cobb method GB/T 2828.1-2003 Sampling procedures for inspection - Part 1. by acceptance quality limit (AQL) retrieval batch test sample plan GB/T 4122.1 Packaging - Terminology - Part 1. Basic GB/T 4857.3 Basic tests for transport packages - Part 3. Test methods for stacking static load GB/T 4857.5 packaging transport package drop test methods GB/T 17344 Test Method for airtight packaging containers ICAO "Safe Transport of Dangerous Goods Aviation Technical Regulations" United Nations "on the Recommendations on the Transport of Dangerous Goods Model Regulations" (15th revised edition)3 Terms and DefinitionsGB/T 4122.1 and established the following terms and definitions apply to this standard. 3.1 It made of metal, wood, plywood, reconstituted wood, fibreboard, plastic or other suitable material to make a complete rectangular or polygonal container. only Either destroy or jeopardize the integrity of the packaging, with a permit to transport operations or to meet the classification requirements of small ports (holes) on the package. 3.2 Flat or convex cylindrical container made of metal, fiber, both ends of the plastic, plywood or other suitable material is. 3.3 It made of paper, plastic film, textiles, woven material or other suitable material of the flexible container. 3.4 Rectangular or polygonal cross-section of a metal or plastic container. 3.5 One or more receptacles, and receptacles other components or materials storage is to achieve its desired function. 3.6 The need for a container vessel from the outer vessel to the role. 3.7 Other containers and container components or materials to achieve the effect of storage is needed. 3.8 External protection device or combination packaging together with the composite to receive protected content is required or absorbent materials, gaskets and other components. 3.9 Required outer packaging during transport. 3.10 In use, having dressed functional package does not require any packaging. 3.11 For transport purposes, one or more packages, packed in an outer packaging mix formed. 3.12 A shipper in order to facilitate handling during transport and storage of one or more of installed packages together to form a unit used Packing. 3.13 By an outer container and the contents of a package composed configured so that the inner and outer containers form a complete package. This package After loading the assembled, it will become a single complete unit for the entire loading, storage, transport and emptying. 3.14 The end product packaging operations, including the preparation for transport of container and its contents. 3.15 Special material capable of absorbing and retention of liquid, the liquid content is once damaged occurred leak out quickly stuck in the material to be adsorbed Feed. 3.16 Description of dangerous goods, if the mixing is liable to cause the release of dangerous heat or gas or produce a corrosive substance, or produce anti physicochemical It should reduce packaging container strength phenomenon. 3.17 Simulate different environmental transport container type testing. 3.18 After costumes dangerous goods packaging container identification. 3.19 Prepared by the United Nations Committee of Experts on the Transport of Dangerous Goods 4 Arab numbered to identify a substance or a particular class of substances. Category 4 4.1 Dangerous Goods Classification 4.1.1 Dangerous Goods by having danger or major risk is divided into nine categories. Some categories are subdivided into divisions. Categories and items Other numbers are not sequential order of the degree of danger. 4.1.2 Class 1. Explosives --- 1.1. a mass explosion hazard substances and articles; --- 1.2. There is a projection hazard but not a mass explosion hazard substances and articles; --- 1.3. There is a fire hazard and a minor blast hazard or partial projection hazard or both have dangerous, but not a mass explosion hazard Substances and articles; --- 1.4. present no significant hazard substances and articles; --- 1.5. a mass explosion hazard Very insensitive substances; --- 1.6. extremely insensitive articles without a mass explosion hazard. 4.1.3 Class 2. gas --- 2.1. flammable gases; --- 2.2. Non-flammable, non-toxic gases; --- 2.3. toxic gases. 4.1.4 Class 3. Flammable liquids Substance with water, emit flammable gases; flammable solids; substances liable to spontaneous combustion. 4.1.5 Class 4 --- 4.1. Flammable solids, self-reactive substances and solid desensitized explosives; --- 4.2. Substances liable to spontaneous combustion; --- 4.3. contact with water emit flammable gases. 4.1.6 Class 5. Oxidizing substances and organic peroxides --- 5.1. oxidizing substances; --- 5.2. Organic peroxides. 4.1.7 Class 6. Toxic substances and infectious substances --- 6.1. toxic substances; --- 6.2. infectious substances. 4.1.8 Class 7. Radioactive substances. 4.1.9 Class 8. Corrosive substances. 4.1.10 Class 9. Miscellaneous dangerous substances and articles. 4.2 Classification of dangerous goods packaging Except the first 1,2,7, Class 5.2, Section 6.2 of dangerous goods, packaging and other types according to the degree of danger of a tripartite division of dangerous goods Packing species, namely. Ⅰ grade packaging --- highly dangerous; Ⅱ grade packaging --- medium danger; Ⅲ grade packaging --- low danger. The degree of danger of various types of dangerous goods can be determined by dividing the hazardous characteristic test.5 code and markup5.1 Code 5.1.1 package code to indicate the type of packaging, the parallel arrangement of several parts. The first part of the Arabic numerals, showing packaging Species; the second part is the Latin capital letter, indicating manufacturing materials packaging containers; if necessary, the third part is the Arabic numerals, showing packaging The species belongs to the type of packaging in packaging. 5.1.1.1 Arabic numerals show Packing. 1 --- barrel; 3 --- cans; 4 --- box; 5 --- bags; 6 --- composite packaging. 5.1.1.2 Latin capital letter indicates manufacturing materials packagings. Composite packaging, two capital letters in Latin to express packaging system Building materials, the first letter indicates the content of the material, the second letter indicates the packaging material. A --- steel (including various types of steel and surface treatment); B --- aluminum; C --- natural wood; D --- plywood; F --- reconstituted wood (reconstituted wood); G --- fiberboard; H --- plastic; L --- textiles. 5.1.1.3 Arabic numerals used to indicate the type of packaging belongs in the packaging. Various common packaging container code in Appendix D. 5.1.2 packs, use only that the packaging code. 5.1.3 behind the packaging container code with the letter "T", "V" or "W", the letter "T" indicates compliance with ICAO (ICAO) "aviation Safe Transport of Dangerous Goods Technical Regulations "requirement bailout package; the letter" V "indicates compliance with ICAO (ICAO)" Aviation Dangerous Goods "Special packaging requirements; the letter" Technical Regulations for the Safe Transport W "represents the type of packaging, although the mark represented by the same, but its manufacturing Regulation Appendix A grid with different specifications, but according to the ICAO (ICAO) requirements "for the Safe Transport of Dangerous Goods Aviation Technical Regulations" and other genera Efficient packaging. 5.1.4 Use the following code represents the Inner packing. Latin uppercase "IP" represents the package. Followed by Arabic numerals in the type of packaging. 5.2 mark Tag is used to indicate the packaging container with the marker test performance test specified in Chapter 7 has passed, and in accordance with Appendix A requirements. 5.2.1 Each container must bear a durable package, easy to identify and clearly mark the appropriate size compared with packaging specifications, and include the following content. 5.2.1.1 The United Nations packaging symbol. This symbol is used to demonstrate compliance with the UN containers, "Recommendations on the Transport of Dangerous Goods Model Regulations "(Rev. 15) and section 7 of the regulations. Metal packaging, can be molded capital letters "UN" representation. 5.2.1.2 wrapper code in accordance with the provisions of 7.1; Example 3H1. 5.2.1.3 The code consists of two parts; cases /X1.8/. 5.2.1.3.1 The first part of the letter indicates the package level. X represents Ⅰ grade packaging; Y represents grade Ⅱ packaging; Z represents Ⅲ grade packaging. 5.2.1.3.2 The second part a) for a single package containing liquid. indicate the relative density, rounded to one decimal. If the relative density of not more than 1.2 can be Omitted. b) to prepare a solid dress with inner packaging or packaging. identify the maximum gross mass in kilograms (kg) represented by (gross). 5.2.1.4 after the code should be marked. a) for a single package containing liquid. the maximum test pressure indicated in units of kPa, rounded to ten digits; cases/250 /; b) for containing solid or packaging with inner packaging. the letters "S"; Example/S /. 5.2.1.5 package marked the last two digits of the year of manufacture. Package type 1H1,1H2,3H1 and 3H2 plastic packaging must also Correctly marked the month of manufacture; available in the following graphics standard in other parts of the package. 5.2.1.6 producers indicated code. China codenamed capital letters CN. 5.2.1.7 marked packaging container producer and factory code and production batch code, said code is indeed by the relevant administrative departments of the State Set, each major area codes in Appendix C. 5.2.2 tag example packaging container according to 5.2.1 of Appendix D. It can be single or multiple rows marked. 5.2.2.1 gross mass of more than 30kg or more than the volume of 30L packaging, should be at the top or the side marker. Mark letters, numbers and symbols The number should be greater than the height of 12mm. When the package is less than or equal to 30kg or 30L, marking letters greater than or equal 6mm. 5kg or 5L The following packages should also be labeled appropriately sized. 5.2.2.2 each new 100L steel drum than in its bottom must have the 5.2.1 Persistence mark. And representing the thinnest gold barrel body Thickness of the metal, with precise mm to 0.1mm and is persistent (such as molding). Material thickness of metal drums shall comply with the requirements of GB 325. when Material thickness thinner than metal drums end of the barrel body, the bottom of the barrel must be marked persistent top barrel/barrel body/barrel base material thickness, for example "1.0-1.2-1.0" or "0.9-1.0-1.0." Other additional marks 5.2.2.3 State administrative departments approved shall ensure that the requirements of 5.2.1 marking can be correctly recognized. 5.2.3 Package Marking example see Appendix D.6 General requirements6.1 General technical requirements Persistent marks must be marked on each package 6.1.1, flag. 6.1.2 IATA dangerous goods packaging to reasonable structure, good protection performance, in line with the ICAO (ICAO) "aviation security transport of dangerous goods Lose Technical Regulations "provisions of the specifications. Its design patterns, technology, materials should be adapted to the characteristics of dangerous goods by air, for stowage for safe handling and Transport, able to withstand the risk under normal conditions of transport. 6.1.3 Dangerous goods shall be packed in good quality packaging, the package structure and sealed condition, to ensure that under normal conditions of transport, will not So that the package transport due to changes in temperature or pressure (e.g., due to the elevation changes generated) caused by any leakage. 6.1.4 direct contact with dangerous goods packaging containers (including closure) should not chemically react with the other, or the substance, the container material Material should not contain contents are prone to dangerous ingredients, so as to produce adverse reactions or significantly impair the performance of the packaging. 6.1.5 packaging containers and their closures must be able to withstand the impact of vibration and changes in temperature and pressure to live under normal conditions of transport and so on, closed Cap, closure or other friction-type closure must be firmly closed, safe, effective and reasonable closure shall be designed and easy to check. 6.1.6 containing liquid containers should allow sufficient room for expansion, in order to ensure that during transport, due to temperature changes caused by liquid Expansion does not cause deformation or leaking containers. Vessel shall at a temperature of 55 ℃, filled. 6.1.7 containing liquid containers (including packaging) should be able to withstand more than 95kPa pressure differential without leakage. If on the auxiliary packet Mounted (outer), the secondary packaging must meet the pressure requirements and other relevant provisions, the packaging may not be the pressure prescribed limits. Packaging should be fixed and the inner liner 6.1.8 security, restrict their movement in the outer packaging. Prevent under normal conditions of transport rupture, leakage, internal When packaged in glass or ceramic package, with class Ⅰ or Class Ⅱ overpack containing 3,4,8 first class and second liquid items 5.1, 6.1, outer packaging should There suction pad materials. Suction pad materials Hazardous reactions may not occur and the inner package containing a dangerous substance, leakage of the contents shall not Cause dangerous chemical reactions or altered protective properties of the cushioning material. 6.1.9 Performance and thickness of packaging materials should be guaranteed not by friction during transport heat and change the content of chemical stability. 6.1.10 In order to reduce the internal pressure of the gas contents of dangerous goods caused by the release, mounted on the packaging container vent air transport main subject Control department for approval. 6.1.11 with a combination package containing dangerous goods, the contents of the closed mouth can not be inverted. In the packaging should be marked clearly indicates that the job direction Identity. 6.1.12 other goods in the same package, do not allow fitted may play each other a chemical reaction and lead to the following consequences, or other dangerous goods And should not react chemically with its dangerous goods are placed in the same outer packaging or in large containers. a) combustion/or release a lot of heat; b) releasing flammable, toxic or asphyxiating gas; c) formation of corrosive substances; d) formation of unstable substances. 6.1.13 When the dress due to temperature changes may become liquid during transport in solids, the package should be consistent with containing a liquid substance Claim. Special packaging requirements 6.2 explosives Containers 6.2.1 Class 1 dangerous goods (explosives) used should reach grade Ⅱ packaging requirements, and meet the requirements of 6.1. 6.2.2 nail, U-nails and no other protective layer closure devices made of metal, should not penetrate to the inside of the outer container. Unless the content is able to Explosives sufficient to prevent contact with the metal. 6.2.3 Content, accessories, cushioning materials and the explosive substance in the package should be placed firmly to ensure that during transport, will not lead Cause dangerous move. 6.2.4 using double-barrel curling steel, measures should be taken to prevent explosive substances embedded in the contact gap. 6.2.5 aluminum drums or steel drums closure means, should a suitable gasket. If the closure device is threaded so that explosive substances can not be embedded In the threads. 6.2.6 If metal-lined boxes installed explosive substances that should not fall into the contained explosive material and the bottom liner or liner In the tank sidewall spacer seam in the middle. 6.2.7 electric detonators must be protected against electrical, magnetic and radiation deviate current. Initiator containing pyrophoric or explosive devices s......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB 19433-2009_English be delivered?Answer: Upon your order, we will start to translate GB 19433-2009_English as soon as possible, and keep you informed of the progress. The lead time is typically 3 ~ 5 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB 19433-2009_English with my colleagues?Answer: Yes. The purchased PDF of GB 19433-2009_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB 19433-2009?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB 19433-2009 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
