GB 19272-2024 English PDFUS$1079.00 ยท In stock
Delivery: <= 8 days. True-PDF full-copy in English will be manually translated and delivered via email. GB 19272-2024: Safety for outdoor body-building equipment - General requirements Status: Valid GB 19272: Historical versions
Basic dataStandard ID: GB 19272-2024 (GB19272-2024)Description (Translated English): Safety for outdoor body-building equipment - General requirements Sector / Industry: National Standard Classification of Chinese Standard: Y55 Classification of International Standard: 97.220.40 Word Count Estimation: 54,537 Date of Issue: 2024-11-28 Date of Implementation: 2025-09-01 Older Standard (superseded by this standard): GB 19272-2011 Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration GB 19272-2024: Safety for outdoor body-building equipment - General requirements---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.ICS 97.220.40 CCSY55 National Standard of the People's Republic of China Replaces GB 19272-2011 General safety requirements for outdoor fitness equipment Released on 2024-11-28 2025-09-01 Implementation State Administration for Market Regulation The National Standardization Administration issued Table of ContentsPreface III 1 Scope 1 2 Normative references 1 3 Terms and Definitions 2 4 General Requirements 5 5 Requirements 5 5.1 Materials 5 5.2 Structural Design 6 5.3 Space Design 9 5.4 Functional components 11 5.5 Structural integrity 13 5.6 Environmental Protection14 5.7 Site and installation 14 5.8 Safety warnings and instructions for use 16 5.9 Management and Maintenance 17 5.10 Special additional requirements 18 6 Verification Methods 19 6.1 Basic requirements 19 6.2 Materials 19 6.3 Functional components 20 6.4 Environmental Protection21 6.5 Stability 21 Appendix A (Normative) Risk Assessment of Equipment 23 Appendix B (Normative) Inspection of protrusions 25 B.1 Surface fillet inspection 25 B.2 General protrusions 25 Appendix C (Informative) Examples of Common Equipment Structure Risks 27 Appendix D (Normative) Inspection of Clips 28 D.1 General requirements 28 D.2 Head and neck 28 D.3 Hands or fingers29 D.4 Other shapes and structures 31 Appendix E (Normative) Hooking or entanglement test 32 E.1 Inspection device 32 E.2 Test methods 33 Appendix F (Normative) Anti-collision test of swing parts 34 F.1 Principle 34 F.2 Test equipment 34 F.3 Test procedure 34 Appendix G (Normative) Load 36 G.1 Permanent load 36 G.2 Variable load 36 G.3 Number of users 38 Appendix H (Normative) Physical tests for structural integrity 41 H.1 Number of cycles/loading time 41 H.2 Test load 41 H.3 Load 42 Appendix I (Informative) Checklist 44 References 46ForewordThis document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for standardization work Part 1.Structure and drafting rules for standardization documents" Drafting. This document replaces GB 19272-2011 "General safety requirements for outdoor fitness equipment". Compared with GB 19272-2011, except for the structure In addition to adjustments and editorial changes, the main technical changes are as follows. --- Added a chapter on "General Requirements" (see Chapter 4); --- Deleted the chapter "Naming" (see Chapter 4 of the.2011 edition); --- Added green environmental protection and recyclable material requirements (see 4.4); --- Changed the material performance requirements (see 5.1.2, 5.2 of the.2011 edition); --- Changed the requirements for fasteners in accessible areas of equipment (see 5.2.1.4, 5.3.1.4 of the.2011 edition); --- Changed the "General Principles" in "Protection against shearing, squeezing, clamping, hooking and entanglement" (see 5.2.2.1, 5.3.2.1 of the.2011 edition); --- Changed the opening type in "head and neck clamp" (see 5.2.2.2, 5.3.2.2.1 of the.2011 edition); --- Changed "finger clamp" (see 5.2.2.3, 5.3.2.6 of the.2011 edition); --- Changed "body clip" (see 5.2.2.5, 5.3.2.4 of the.2011 edition); --- Increased the size of the cylindrical space for "lying flat" (see 5.3.2.1); --- Changed "activity area" (see 5.3.3, 5.3.3.2.3 of the.2011 edition); --- Changed "activity space" (see 5.3.4, 5.3.3.2.4 of the.2011 edition); --- Changed "foot tread" (see 5.4.1, 5.12.2.1 of the.2011 edition); --- Changed "swinging parts" (see 5.4.2, 5.12.2.3 of the.2011 edition); --- Added "moving parts" (see 5.4.2); --- Deleted "wire rope and pulley" (see 5.3.6.5 of the.2011 edition); --- Changed "resistance device" (see 5.4.5, 5.3.8 of the.2011 edition); --- Changed "Entry and Exit" (see 5.4.6, 5.3.9 of the.2011 edition); --- Changed "adjustment and locking mechanism" (see 5.4.7, 5.3.10 of the.2011 edition); --- Changed "Electrical components" (see 5.4.9, 5.11 of the.2011 edition); --- Deleted "Packaging" (see 7.2 of the.2011 edition), "Transport" (see 7.3 of the.2011 edition), "Storage" (see 7.4); --- Changed "Installation" (see 5.7.2, 5.7.1 of the.2011 edition); --- Added the test method for impact attenuation performance of the buffer layer (see 5.7.5.2); --- Changed "Safety Warnings and Instructions for Use" (see 5.8, 5.6 and 7.1 of the.2011 edition); --- Changed "Management and Maintenance" (see 5.9, Chapter 8 of the.2011 edition); --- Added requirements for personal information collection (see 5.9.1); --- Added "ageing-friendly" (see 5.10.1); --- Added "child-friendly" (see 5.10.2); --- Changed the verification method "Limits of Hazardous Substances" (see 6.2.2, 6.2.3 of the.2011 edition); --- Added "Equipment Life Cycle Risk Assessment Specification" (see Appendix A); --- Changed the verification method "Protrusion Inspection" (see Appendix B, 6.3.1 of the.2011 edition); --- Added "swinging parts anti-collision test" (see Appendix F); --- Added load calculation method (see Appendix G). Please note that some of the contents of this document may involve patents. The issuing organization of this document does not assume the responsibility for identifying patents. This document is proposed and coordinated by the State General Administration of Sport. This document was first issued in.2003, revised for the first time in.2011, and this is the second revision. General safety requirements for outdoor fitness equipment1 ScopeThis document specifies the general requirements for outdoor fitness equipment (hereinafter referred to as "equipment") and the materials, structural design, space design, functional components, etc. The requirements of components, structural integrity, environmental protection, site and installation, safety warnings and instructions for use, management and maintenance, and aging and child-friendly are described. The verification method should be used. This document applies to the research and development, design, manufacturing, installation, maintenance, inspection and certification of outdoor fitness equipment. This document does not apply to amusement rides.2 Normative referencesThe contents of the following documents constitute essential clauses of this document through normative references in this document. For referenced documents without a date, only the version corresponding to that date applies to this document; for referenced documents without a date, the latest version (including all amendments) applies to This document. GB/T 230.1 Rockwell hardness test for metallic materials Part 1.Test method GB/T 1766-2008 Rating method for aging of paint and varnish coatings GB/T 1804-2000 General tolerances Tolerances of linear and angular dimensions without tolerance indication GB/T 1865 Paints and varnishes - Artificial weathering and exposure to artificial radiation - Filtered xenon arc radiation GB 2894 Safety signs and their use guidelines GB 3096-2008 Acoustic Environment Quality Standard GB/T 5296.1 Instructions for use of consumer products Part 1.General GB/T 5296.7 Instructions for use of consumer products Part 7.Sports equipment GB 6675.4 Safety of toys Part 4.Migration of certain elements GB/T 9286-2021 Paint and varnish cross-cut test GB/T 10125 Artificial atmosphere corrosion test Salt spray test GB/T 15190 Technical specification for the division of acoustic environment functional areas GB/T 22048 Determination of certain phthalate plasticizers in toys and children's products GB/T 22102-2008 Anticorrosive wood GB/T 26125 Determination of six restricted substances (lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls and polybrominated diphenyl ethers) in electronic and electrical products GB/T 30228-2013 Safety performance requirements and test methods for impact attenuation of sports venue surfaces GB 31187 General requirements for the electrical parts of sporting goods GB/T 34289 Safety signs and labels for fitness equipment and fitness venues GB/T 35273 Information security technology Personal information security specification GB/T 50145-2007 Engineering classification standard for soil SN/T 1877.2 Determination of polycyclic aromatic hydrocarbons in plastic raw materials and their products SN/T 1877.4 Determination of polycyclic aromatic hydrocarbons in rubber and its products ISO 4649.2024 Rubber, vulcanized or thermoplastic -- Determination of resistance to abrasion using a rotating drum apparatus (Rubber, vulcanized orthermoplastic-Determination of abrasion resistance using arotating ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB 19272-2024_English be delivered?Answer: Upon your order, we will start to translate GB 19272-2024_English as soon as possible, and keep you informed of the progress. The lead time is typically 5 ~ 8 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB 19272-2024_English with my colleagues?Answer: Yes. The purchased PDF of GB 19272-2024_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB 19272-2024?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB 19272-2024 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
