GB 1903.3-2015 English PDF

US$129.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB 1903.3-2015: (National food safety standards of food nutrition fortifier 5-adenosine monophosphate)
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB 1903.3-2015	129	Add to Cart	3 days	(National food safety standards of food nutrition fortifier 5-adenosine monophosphate)	Valid

Similar standards

GB 1886.98   GB 1886.74   GB 1886.40   GB 1903.5   GB 1903.11   GB 1903.1   

Basic data

Standard ID: GB 1903.3-2015 (GB1903.3-2015)
Description (Translated English): (National food safety standards of food nutrition fortifier 5-adenosine monophosphate)
Sector / Industry: National Standard
Classification of Chinese Standard: X40
Word Count Estimation: 6,643
Date of Issue: 2015-11-13
Date of Implementation: 2016-05-13
Regulation (derived from): National Health and Family Planning Commission Announcement No
Issuing agency(ies): National Health and Family Planning Commission of the People's Republic of China

GB 1903.3-2015: (National food safety standards of food nutrition fortifier 5-adenosine monophosphate)

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
(National food safety standards of food nutrition fortifier 5-adenosine monophosphate) National Standards of People's Republic of China National Food Safety Standard Food fortifier 5 'adenosine monophosphate Issued on. 2015-11-13 2016-05-13 implementation People's Republic of China National Health and Family Planning Commission released National Food Safety Standard Food fortifier 5 'adenosine monophosphate

1 Scope

This standard applies to food fortifier 5'-adenosine monophosphate. 2 molecular formula, relative molecular mass and structural formula Formula 2.1 C10H14N5O7P 2.2 formula 2.3 relative molecular mass 347.22 (according to 2007 international relative atomic mass)

3 Technical requirements

3.1 Sensory requirements Sensory requirements shall comply with the requirements of Table 1. Table 1 Sensory requirements Project requires test methods Colorless to white color State crystal or crystalline powder Take the right amount of sample is placed in a clean, dry white porcelain plate, observe its color under natural light And state 3.2 Physical and Chemical Indicators Physical and chemical indicators should be consistent with the provisions of Table 2. Table 2. Physical and chemical indicators Item Index Test Method 5'-adenosine monophosphate (C10H14N5O7P) (dry basis), w /% 98.0 ~ 102.0 Appendix A A.3 Loss on drying, w /% ≤ 6.0 GB 5009.3a Heavy metals (Pb)/(mg/kg) ≤ 10.0 GB 5009.74 Arsenic (As)/(mg/kg) ≤ 3.0 GB 5009.76 Absorbance ratio A1/A2 0.82 ~ 0.88 A3/A2 0.19 ~ 0.23 Appendix A A.4 Other nucleic acid decomposition by test A.5 in Appendix A a drying temperature of 120 ℃, drying time of 4h.

Appendix A

Testing method A.1 General Provisions This standard reagents and water in the absence of other specified requirements, refer to the three water analytical reagent and GB/T 6682 regulations. Reagents Used in the standard solution, standard solution for measuring impurities, formulations and products, did not indicate when the other requirements according to GB/T 601, GB/T 602, the provisions of the preparation of GB/T 603's. Solution was used in the tests did not indicate what is formulated with solvent, it refers to an aqueous solution. A.2 Identification Test A.2.1 Weigh 0.01g sample was added 1000mL hydrochloric acid solution (1 → 1000) was dissolved in a solution prepared, at a wavelength of 255nm ~ 259nm of maximum absorption band. A.2.2 Weigh 0.25g sample is added 1mL of sodium hydroxide solution (40g/L), to prepare a solution (1 → 20), of this solution 5mL, was added 2mL ammonium molybdate solution, should not produce precipitation, then add 7mL nitric acid, boil 10min, after adding phosphate test solution, when heated, a yellow The precipitate was coupled with sodium hydroxide solution (40g/L) or ammonia solution, the precipitate was dissolved. A.3 5 'monophosphate (C10H14N5O7P) (dry basis) of the Determination A.3.1 Analysis step Weigh 0.2g sample, accurate to 0.0002g, add 1mL sodium hydroxide solution (40g/L), 200 mL water was added accurately, this accurately taken Solution 2mL, hydrochloric acid solution (1 → 1000) and to accurately match into 200mL, as the test solution. Measured at a wavelength of 257nm at the detection of liquid Absorbance A. A.3.2 Calculation Results 5'-adenosine monophosphate (C10H14N5O7P) (dry basis) of the mass fraction w1, according to equation (A.1) Calculated. w1 = 0.2 × 2.315 × A m × 100% (A.1) Where. 0.2 --- conversion factor; 2.315 --- conversion factor; A --- absorbance detection solution; Quality, unit m --- converted to a dry basis after the sample in grams (g). A.4 Determination of the absorbance ratio Weigh 0.010g sample, hydrochloric acid solution (1 → 1000) dissolved and diluted to 1000mL, the solution was measured at a wavelength of 250nm, The absorbance at 260nm and 280nm respectively A1, A2 and A3, calculate the absorbance ratio A1/A2 and A3/A2. Determination A.5 other nucleic acid decomposition products Weigh 0.10g sample, hydrochloric acid solution to dissolve and add water to make into a 20mL, as the test solution. Amount of test solution 1μL, without control Liquid, propanol - ammonia solution (ammonia solution 400mL of water to 1000mL) - acetone mixture (6.5.2) as a developing solvent, thinner Layer chromatographic analysis. Stop Expand Expand solvent former top line increased by about 10cm high, air-dried in the dark, UV light (wavelength about 250nm) observed, it should only be seen in one spot. Preparative thin layer plate. dried at 110 ℃ 1h, thin layer chromatography on silica gel (fluorescein Agent) as a carrier. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB 1903.3-2015_English be delivered?

Answer: Upon your order, we will start to translate GB 1903.3-2015_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB 1903.3-2015_English with my colleagues?

Answer: Yes. The purchased PDF of GB 1903.3-2015_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.