GB 1886.135-2015 English PDF

US$129.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB 1886.135-2015: National Food Safety Standard -- Food Additives -- Benzyl alcohol
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB 1886.135-2015	129	Add to Cart	3 days	National Food Safety Standard -- Food Additives -- Benzyl alcohol	Valid

Similar standards

GB 1886.300   GB 1886.210   GB 1886.40   GB 1886.129   GB 1886.141   GB 1886.127   

Basic data

Standard ID: GB 1886.135-2015 (GB1886.135-2015)
Description (Translated English): National Food Safety Standard -- Food Additives -- Benzyl alcohol
Sector / Industry: National Standard
Classification of Chinese Standard: X40
Word Count Estimation: 6,621
Date of Issue: 2015-09-22
Date of Implementation: 2016-03-22
Regulation (derived from): PRC National Health and Family Planning Commission 2015 No.8
Issuing agency(ies): National Health and Family Planning Commission of the People's Republic of China

GB 1886.135-2015: National Food Safety Standard -- Food Additives -- Benzyl alcohol

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
(National food safety standards for food additives, benzyl alcohol) National Standards of People's Republic of China National Food Safety Standard Food Additives benzyl alcohol Issued on. 2015-09-22 2016-03-22 implementation People's Republic of China National Health and Family Planning Commission released National Food Safety Standard Food Additives benzyl alcohol

1 Scope

This standard applies to benzaldehyde or benzyl chloride as raw materials by a chemical reaction of benzyl alcohol food additive. 2 chemical name, molecular formula, molecular mass and structural formula 2.1 Chemical Name Benzyl alcohol Formula 2.2 C7H8O 2.3 formula 2.4 relative molecular mass 108.14 (according to 2007 international relative atomic mass)

3 Technical requirements

3.1 Sensory requirements Sensory requirements shall comply with the requirements of Table 1. Table 1 Sensory requirements Project requires test methods Color colorless Liquid state The sample was placed in a cuvette, were visually observed Faint aroma of fragrant, fruity aroma GB/T 14454.2 3.2 Physical and Chemical Indicators Physical and chemical indicators should be consistent with the provisions of Table 2. Table 2. Physical and chemical indicators Item Index Test Method Solubility (25 ℃) 1mL whole sample was dissolved in 30mL distilled water GB/T 14455.3 Methanol content of benzene, w /% ≥ 98.0 Appendix A Acid value (in dollars KOH)/(mg/g) ≤ 0.5 GB/T 14455.5 Refractive index (20 ℃) 1.5360 ~ 1.5410 GB/T 14454.4 The relative density (25 ℃/25 ℃) 1.042 ~ 1.047 GB/T 11540 Chlorine-containing compounds by testing GB/T 14454.12

Appendix A

Determination of benzyl alcohol content A.1 instruments and equipment A.1.1 chromatograph. According to GB/T 11538-2006 provisions in Chapter 5. A.1.2 Column. capillary column. A.1.3 Detector. Hydrogen flame ionization detector. A.2 Determination Area normalization method. According to GB/T 11538-2006 10.4 Determination. A.3 repeatability and results are shown Performed according to GB/T 11538-2006 11.4 provisions. Food Additives Benzyl alcohol gas chromatograph (area normalization method) See Appendix B.

Appendix B

Food Additives Benzyl alcohol gas chromatogram (Area normalization method) B.1 food additives benzyl alcohol gas chromatogram Food Additives benzyl alcohol by gas chromatography is shown in Figure B.1. Figure B.1 food additives benzyl alcohol gas chromatogram B.2 operating conditions B.2.1 Column. capillary column length 30m, an inner diameter of 0.32mm. B.2.2 stationary phase. 5% phenyl methyl polysiloxane. B.2.3 film thickness. 0.25μm. B.2.4 chromatography oven temperature. linear temperature programmed from 60 ℃ ~ 120 ℃, the rate of 3 ℃/min; then linear temperature program from 120 ℃ ~ 250 ℃, Rate of 10 ℃/min. B.2.5 Inlet temperature. 250 ℃. B.2.6 detector temperature. 250 ℃. B.2.7 Detector. Hydrogen flame ionization detector. B.2.8 carrier gas. nitrogen. B.2.9 carrier gas flow rate. 1mL/min. B.2.10 Injection volume. about 0.2μL. B.2.11 Split ratio. 100.1. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB 1886.135-2015_English be delivered?

Answer: Upon your order, we will start to translate GB 1886.135-2015_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB 1886.135-2015_English with my colleagues?

Answer: Yes. The purchased PDF of GB 1886.135-2015_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.