GB 1886.108-2015 English PDF

US$149.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB 1886.108-2015: National Food Safety Standard -- Food Additives -- Azodicarbonamide
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB 1886.108-2015	149	Add to Cart	3 days	National Food Safety Standard -- Food Additives -- Azodicarbonamide	Valid

Similar standards

GB 1886.300   GB 1886.210   GB 1886.40   GB 1886.104   GB 1886.102   GB 1886.105   

Basic data

Standard ID: GB 1886.108-2015 (GB1886.108-2015)
Description (Translated English): National Food Safety Standard -- Food Additives -- Azodicarbonamide
Sector / Industry: National Standard
Classification of Chinese Standard: X40
Word Count Estimation: 7,722
Date of Issue: 2015-11-13
Date of Implementation: 2016-05-13
Regulation (derived from): National Health and Family Planning Commission Announcement No
Issuing agency(ies): National Health and Family Planning Commission of the People's Republic of China

GB 1886.108-2015: National Food Safety Standard -- Food Additives -- Azodicarbonamide

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
(National Food Safety Standard Food Additive azodicarbonamide) National Standards of People's Republic of China National Food Safety Standard Food additive azodicarbonamide Issued on. 2015-11-13 2016-05-13 implementation People's Republic of China National Health and Family Planning Commission released National Food Safety Standard Food additive azodicarbonamide

1 Scope

This standard applies to food additive azodicarbonamide. 2 chemical name, molecular formula, molecular mass and structural formula 2.1 Chemical Name Azodicarbonamide, azodicarbonamide Formula 2.2 C2H4N4O2 2.3 formula H2N C 􀪅􀪅 NN􀪅 C 􀪅􀪅 NH2 2.4 relative molecular mass 116.08 (according to 2007 international relative atomic mass)

3 Technical requirements

3.1 Sensory requirements Sensory requirements shall comply with the requirements of Table 1. Table 1 Sensory requirements Project requires test methods Color yellow to orange Status crystalline powder Take the right amount of sample is placed in a clean, dry white porcelain dish, natural Color and light to observe the state 3.2 Physical and Chemical Indicators Physical and chemical indicators should be consistent with the provisions of Table 2. Table 2. Physical and chemical indicators Item Index Test Method Azodicarbonamide (C2H4N4O2) content (dry basis), w /% 98.6 ~ 100.5 Appendix A A.3 Nitrogen, w /% 47.2 ~ 48.7 Appendix A A.4 pH ≥ 5 Appendix A A.5 Loss on drying, w /% ≤ 0.5 GB 5009.3 in a vacuum drying method Residue on ignition, w /% ≤ 0.15 GB/T 9741 Lead (Pb)/(mg/kg) ≤ 2.0 GB 5009.12 a drying temperature of 50 ℃ ± 2 ℃, drying time is 2h.

Appendix A

Testing method A.1 General Provisions This standard reagents and water in the absence of other specified requirements, refer to the three water analytical reagent and GB/T 6682 regulations. test In the standard titration solution, impurity measurement standard solution, preparations and products, did not indicate when the other requirements, according to GB/T 601, GB/T 602 and GB/T 603 provisions prepared. Solution was used in the tests did not indicate what is formulated with solvent, it refers to an aqueous solution. A.2 Identification Test A.2.1 maximum absorption Formulated at a concentration of 35μg/mL of sample solution, the sample solution has a maximum absorption at a wavelength of about 245nm. A.2.2 solubility and melting Almost insoluble in water and most organic solvents, slightly soluble in dimethyl sulfoxide. Above 180 ℃ melted with decomposition. Determination A.3 azodicarbonamide (C2H4N4O2) content (dry basis) of A.3.1 Reagents and materials A.3.1.1 potassium iodide. A.3.1.2 dimethyl sulfoxide. A.3.1.3 hydrochloric acid solution. 0.5mol/L. A.3.1.4 sodium thiosulfate standard titration solution. c (Na2S2O3) = 0.1mol/L. A.3.2 Analysis step Weigh at 50 ℃ vacuum dried samples after 2h about 225mg, accurate to 0.01mg, into the 250mL bottle with glass stopper iodine. Adding about 23mL dimethyl sulfoxide, under washing may be attached to the wall of the sample, stopper, the stopper around the Sheng on 2mL solvent. Turning occasionally Click to sample is completely dissolved. Remove the stopper, so that the remaining solvent may be dissolved together with the sample flows into the flask. With 15mL water 5.0g KI washed into the flask, followed immediately draw 10mL hydrochloric acid solution at a concentration of 0.5mol/L, and transferred into a flask, quickly segue. Shake the bottle To potassium iodide is completely dissolved, then allowed to stand in the dark conditions 20min ~ 25min, was added dropwise with 0.1mol/L sodium thiosulfate standard titration Given to the separated iodine yellow color disappeared, such as the re-emergence of yellow in 15min, then sodium thiosulfate standard titration solution and then titrated to no color. Another 25mL dimethylsulfoxide, 5.0g of potassium iodide, 15mL water and 5mL hydrochloric acid solution blank test. A.3.3 Calculation Results Azodicarbonamide (C2H4N4O2) content (dry basis) w1, according to formula (A.1) Calculated. w1 = V1-V2 1000 × c1 × M1 m1 × 100% (A.1) Where. Volume V1 --- sample consumption of sodium thiosulfate standard titration solution, in milliliters (mL); V2 --- blank test volume consumption of sodium thiosulfate standard titration solution, in milliliters (mL); 1000 --- conversion factor; Concentration c1 --- sodium thiosulfate standard titration solution, expressed in moles per liter (mol/L); --- Ml molar mass of azodicarbonamide, units of grams per mole (g/mol), [M1 ( 2C2H4N4O2 ) = 58.04]; m1 --- sample mass, in grams (g). A.4 Determination of nitrogen A.4.1 Reagents and materials A.4.1.1 potassium sulfate. A.4.1.2 mercuric oxide. A.4.1.3 concentrated hydrochloric acid. A.4.1.4 sulfuric acid. A.4.1.5 ammonia-free water. A.4.1.6 sodium hydroxide solution. 50%. A.4.1.7 sodium thiosulfate solution. 44%. A.4.1.8 boric acid solution. 4%. A.4.1.9 sulfuric acid standard titration solution. c ( 2H2SO4 ) = 0.05mol/L. Before use with water 0.5mg/mL of sulfuric acid standard titration The solution was diluted from. A.4.1.10 methyl red - methylene blue mixed indicator solution. A.4.2 Analysis step Weigh about 50mg samples, accurate to 0.01mg, into 100mL Kjeldahl flask, add 3mL of concentrated hydrochloric acid was heated digester 1.25h, Add water periodically to maintain the original volume. Increase the heat when the digester to the end, concentrated to half the original volume. Cooled to room temperature, 1.5g of sulfuric acid Potassium, 3mL water and 4.5mL of sulfuric acid, iodine and heated to fog no longer isolated. The mixture was cooled, washed with water to rinse the edge of the flask was heated to Charring occurs, then cooled to room temperature. In carbide added 40mg of mercury oxide, heated to pale yellow solution was cooled and rinsed with a few ml of water burn Bottle wall, cook Solutions 3h, cooling, 20mL ammonia-free water, 16mL50% sodium hydroxide solution and 5mL44% sodium thiosulfate Solution. The flask was immediately connected to the distillation apparatus, according to the general nitrogen determination distillation, the distillate is collected in a solution containing boric acid receiving 10mL4% Vessel. A few drops of methyl red - methylene blue mixed indicator solution with 0.05mol/L sulfuric acid standard titration solution titration. At the same time a blank test. A.4.3 Calculation Results Nitrogen mass fraction w2, according to equation (A.2) Calculated. w2 = V3-V4 1000 × c2 × M2 m2 × 100% (A.2) Where. V3 --- sample consumption volume of sulfuric acid standard titration solution, in milliliters (mL); V4 --- blank test consumption volume of sulfuric acid standard titration solution, in milliliters (mL); 1000 --- conversion factor; C2 --- concentration of sulfuric acid standard titration solution, expressed in moles per liter (mol/L); The M2 --- molar mass of nitrogen in grams per mole (g/mol), [M2 (N) = 14.0]; m2 --- sample mass, in grams (g). A.5 pH measurement Weigh 2g sample, add 100mL water, stirred vigorously for 5min, measured by the method of GB/T 9724 provisions with a pH meter. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB 1886.108-2015_English be delivered?

Answer: Upon your order, we will start to translate GB 1886.108-2015_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB 1886.108-2015_English with my colleagues?

Answer: Yes. The purchased PDF of GB 1886.108-2015_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.