GB 18245-2024 English PDFUS$289.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB 18245-2024: Safety specification for dust explosion prevention and protection in tobacco processing system Status: Valid GB 18245: Historical versions
Basic dataStandard ID: GB 18245-2024 (GB18245-2024)Description (Translated English): Safety specification for dust explosion prevention and protection in tobacco processing system Sector / Industry: National Standard Classification of Chinese Standard: C67 Classification of International Standard: 13.230 Word Count Estimation: 14,167 Date of Issue: 2024-09-29 Date of Implementation: 2025-04-01 Older Standard (superseded by this standard): GB 18245-2000 Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration GB 18245-2024: Safety specification for dust explosion prevention and protection in tobacco processing system---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. ICS 13.230 CCSC67 National Standard of the People's Republic of China Replaces GB 18245-2000 Safety specification for dust explosion prevention in tobacco processing systems Released on 2024-09-29 2025-04-01 Implementation State Administration for Market Regulation The National Standardization Administration issued Table of ContentsPreface III 1 Scope 1 2 Normative references 1 3 Terms and Definitions 1 4 General Requirements 2 5 Requirements for prevention of ignition sources of process equipment 2 6 Requirements for dust removal facilities and equipment 2 7 Electrical safety requirements 4 8 Safety management requirements 4 9 Verification Method 5 References 7ForewordThis document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for standardization work Part 1.Structure and drafting rules for standardization documents" Drafting. This document replaces GB 18245-2000 "Safety Regulations for Dust Explosion Prevention in Tobacco Processing Systems". Compared with GB 18245-2000, except for the structure In addition to adjustments and editorial changes, the main technical changes are as follows. a) Added the term and definition of "dust removal room" (see 3.2); b) The definition of "tobacco processing system" has been changed (see 3.1, 3.1 of the.2000 edition); c) The terms and definitions of “dust explosion prevention” and “dust cloud” have been deleted (see 3.2 and 3.3 of the.2000 edition); d) Added the identification, assessment and zoning control content of tobacco dust explosion hazard areas (see 4.2); e) Added requirements for identification and suppression of ignition sources of major process equipment in tobacco processing systems and dust removal systems (see Chapter 5); f) Added safety technical requirements for dust explosion prevention in tobacco dust removal systems (see Chapter 6, Chapter 7, and Chapter 8); g) Added technical requirements for pneumatic ash conveying, spiral ash conveying, and manual ash collection (see 6.5, 6.6, and 6.7); h) Added management requirements for inspection, maintenance and cleaning operations (see 8.7 and 8.8). Please note that some of the contents of this document may involve patents. The issuing organization of this document does not assume the responsibility for identifying patents. This document is proposed and coordinated by the Ministry of Emergency Management of the People's Republic of China. The previous versions of this document and the documents it replaces are as follows. ---First published in.2000 as GB 18245-2000; ---This is the first revision. Safety specification for dust explosion prevention in tobacco processing systems1 ScopeThis document specifies the overall requirements for dust explosion prevention and safety in tobacco processing systems, the requirements for preventing ignition sources for process equipment, and the requirements for dust removal facilities and equipment. Requirements, electrical safety requirements, safety management requirements, and describes the verification method. This document applies to the design, operation, management and inspection of dust explosion protection in tobacco processing systems.2 Normative referencesThe contents of the following documents constitute essential clauses of this document through normative references in this document. For referenced documents without a date, only the version corresponding to that date applies to this document; for referenced documents without a date, the latest version (including all amendments) applies to This document. GB 2894 Safety signs and their use guidelines GB/T 3836.1 Explosive atmospheres Part 1.General requirements for equipment GB/T 3836.2 Explosive atmospheres Part 2.Equipment protected by flameproof enclosure "d" GB/T 3836.3 Explosive atmospheres Part 3.Equipment protected by increased safety "e" GB/T 3836.16 Explosive atmospheres Part 16.Inspection and maintenance of electrical installations GB 15577 Dust explosion safety regulations GB/T 15604 Dust explosion-proof terminology GB/T 15605 Dust Explosion Pressure Venting Guide GB/T 16758 Classification and technical requirements of exhaust hoods GB/T 17919 Explosion-proof Guidelines for Dust Collectors Used in Dust Explosion Hazardous Locations GB 50016 Code for Fire Protection Design of Buildings GB 50019 Design code for heating, ventilation and air conditioning of industrial buildings GB 50057 Code for Lightning Protection Design of Buildings GB 50058 Design specification for electrical installations in explosive atmospheres3 Terms and definitionsThe terms and definitions defined in GB/T 15604 and the following apply to this document. 3.1 The general term for the production process of processing tobacco leaves into finished cigarettes. Note. This includes tobacco processing such as tobacco leaf redrying, tobacco leaf making, tobacco leaf rolling and packaging, and tobacco leaf reconstitution. 3.2 Dust removal room A building (structure) where tobacco dust collection and treatment equipment is centrally arranged. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB 18245-2024_English be delivered?Answer: Upon your order, we will start to translate GB 18245-2024_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB 18245-2024_English with my colleagues?Answer: Yes. The purchased PDF of GB 18245-2024_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB 18245-2024?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB 18245-2024 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
