GB/T 18166-2025 English PDFUS$599.00 ยท In stock
Delivery: <= 5 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 18166-2025: Specifications of amusement rides overhead railway category Status: Valid GB/T 18166: Historical versions
Basic dataStandard ID: GB/T 18166-2025 (GB/T18166-2025)Description (Translated English): Specifications of amusement rides overhead railway category Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: Y57 Classification of International Standard: 97.200.40 Word Count Estimation: 30,337 Date of Issue: 2025-08-29 Date of Implementation: 2026-03-01 Older Standard (superseded by this standard): GB/T 18166-2008 Issuing agency(ies): State Administration for Market Regulation, National Standardization Administration GB/T 18166-2025: Specifications of amusement rides overhead railway category---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT18166-2025ICS 97.200.40 CCSY57 National Standard of the People's Republic of China Replaces GB/T 18166-2008 General technical requirements for overhead tour vehicle amusement facilities Released on August 29, 2025 Implementation on March 1, 2026 State Administration for Market Regulation The National Standardization Administration issued Table of ContentsPreface III 1 Scope 1 2 Normative references 1 3 Terms and Definitions 2 4 Technical Requirements 3 5 Inspection and testing requirements 10 6 Random documents, marking, packaging, transportation and storage 14 Appendix A (Informative) Schematic diagram of typical equipment of overhead tour bus 15 Appendix B (Normative) Examples of Common Important Shafts (Pin Shafts) and Important Welds 20 Appendix C (Normative) Basic Requirements for Unmanned Driving 22 Reference 23 Preface This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for standardization work Part 1.Structure and drafting rules for standardization documents" Drafting. This document replaces GB/T 18166-2008 "General Technical Requirements for Aerial Tour Vehicles" and is consistent with GB/T 18166-2008. In addition to structural adjustments and editorial changes, the main technical changes are as follows. --- Changed the scope (see Chapter 1, Chapter 1 of the.2008 edition); --- Added terms and definitions (see Chapter 3); --- Changed the design documents and design calculation requirements (see 4.1.1, 4.1.4, 4.1.1, 4.4 of the.2008 edition); --- Increased speed, acceleration curve or maximum value requirements (see 4.1.5); --- Added requirements for outsourced parts and purchased electromechanical products (see 4.1.6); --- Increased operating speed limit (see 4.1.7); --- Increased impact coefficient requirements (see 4.1.8); --- Added non-destructive testing requirements for important shafts (pins) and important welds (see 4.1.10); --- Added bolt connection requirements (see 4.1.11); --- Added requirements for track joint expansion structure (see 4.2.1); --- Increased track slope requirements (see 4.2.2); --- Increased track column deformation requirements (see 4.2.3); --- Increased the height difference requirements of rail joints (see 4.2.7); --- Added the requirements for track changing devices (see 4.2.8); --- Changed the requirements for vehicle lifting and maintenance devices (see 4.2.9, 7.4 of the.2008 edition); --- Changed the requirements for the identification of passenger devices (see 4.3.1, 8.1 of the.2008 edition); --- Deleted the requirements for vehicle frame materials, seat materials and seat dimensions (see 8.2 of the.2008 edition); --- Added seat fixing structure requirements (see 4.3.2); --- Added passenger restraint device requirements (see 4.3.3); --- Added requirements for push-type flying theaters (see 4.3.4); --- Added cabin door requirements (see 4.3.5); --- Added cockpit and driver's cab requirements (see 4.3.9); --- Increased safety clearance requirements for passenger accessible areas (see 4.3.11); --- Changed the wheel assembly requirements (see 4.3.13, 8.4 of the.2008 edition); --- Added vehicle connector requirements (see 4.3.15); --- Added support or hanging fulcrum requirements (see 4.3.16); --- Changed the pedal requirements (see 4.4.3, 8.5 of the.2008 edition); --- Added rack rail car requirements (see 4.4.4); --- Added hydraulic and pneumatic system requirements (see 4.4.5 to 4.4.7); --- Changed the requirements for internal combustion engines (see 4.4.8, 8.6 of the.2008 edition); --- Added risk assessment requirements (see 4.5.2); --- Added service life requirements for electrical components (see 4.5.3); --- Changed the requirements for the collection system (see 4.5.6, 6.5.2 of the.2008 edition); --- Changed the lighting requirements (see 4.5.7, 6.9 of the.2008 edition); --- Changed the requirements for energy storage units (see 4.5.8, 6.8 of the.2008 edition); --- Changed the requirements for connecting plugs between cockpits (see 4.5.9, 6.5.1 of the.2008 edition); --- Added requirements for communication systems, wireless control systems, automatic anti-collision control, and push-type flying theaters (see 4.5.12, 4.5.13, 4.5.17, 4.5.18, 4.5.20); --- Increased speed limiting device requirements (see 4.6.1); --- Increased the requirements for limit devices (see 4.6.3); --- Increased braking deceleration requirements (see 4.6.6); --- Added the requirements for anti-reverse devices (see 4.6.7); --- Added cockpit swing control requirements (see 4.6.8); --- Increased safety envelope space requirements (see 4.6.10); --- Added safety protection devices and functional requirements for push-type flying theaters (see 4.6.12); --- Changed the emergency rescue requirements (see 4.7, Chapter 11 of the.2008 edition); --- Added surface protection requirements (see 4.8); --- Increased machine requirements (see 4.9); --- Changed the inspection and test requirements (see Chapter 5, Chapter 11 of the.2008 edition); --- Added random documents, marking, packaging, transportation and storage requirements (see Chapter 6); --- Added basic requirements for unmanned driving (see Appendix C). Please note that some of the contents of this document may involve patents. The issuing organization of this document does not assume the responsibility for identifying patents. This document is proposed and coordinated by the National Technical Committee for Standardization of Ropeways and Amusement Facilities (SAC/TC250). This document was drafted by. China Special Equipment Testing and Research Institute, Zhuzhou CRRC Special Equipment Technology Co., Ltd., Zhejiang Southern Culture and Tourism Technology Co., Ltd., Guangdong Jinma Amusement Co., Ltd., Hunan Special Equipment Inspection and Testing Institute, Jiangsu Feisuo Intelligent Driving Equipment Co., Ltd. Company, Sichuan Special Equipment Inspection Institute, Shenyang Chuangqi Amusement Equipment Co., Ltd., Beijing Weigang Slide Conveying Equipment Co., Ltd., Shanghai Hai International Theme Park Co., Ltd., Zhejiang Dafeng Rail Transit Equipment Co., Ltd., Zhuji Golden Monkey Amusement Equipment Manufacturing Co., Ltd., Hangzhou Haolewu Amusement Equipment Co., Ltd. and Chongqing Aiboriwei Rail Transit Equipment Co., Ltd. The main drafters of this document are. Wang Yinlan, Chen Weiwei, Jin Junhui, Lu Zhenhai, Liang Junxin, Huan Jie, Gong Gaoke, Chen Ming, Kang Changbo, Ma Xiaobin, Zhang Jiejing, Cheng Peng, Yin Haina, Zhao Yufei, Cui Mingliang, Zeng Jinsheng, and Yang Wu. This document was first published in.2000, revised for the first time in.2008, and this is the second revision. General technical requirements for overhead tour vehicle amusement facilities1 ScopeThis document specifies the technical requirements, inspection and testing requirements, random inspection and testing requirements of overhead sightseeing vehicle amusement facilities (hereinafter referred to as "overhead sightseeing vehicle"). Documentation, marking, packaging, transportation and storage. This document applies to the design, manufacture, installation, modification, repair, inspection, testing and use management of aerial sightseeing vehicles.2 Normative referencesThe contents of the following documents constitute the essential clauses of this document through normative references in this document. For referenced documents without a date, only the version corresponding to that date applies to this document; for referenced documents without a date, the latest version (including all amendments) applies to This document. GB/T 191 Pictorial markings for packaging, storage and transportation GB/T 985.1 Recommended grooves for gas welding, arc welding, gas shielded welding and high energy beam welding GB/T 985.2 Recommended groove for submerged arc welding GB/T 5226.1 Electrical safety of machinery - Electrical equipment of machinery - Part 1.General technical requirements GB/T 7134 Cast industrial plexiglass sheets GB/T 7403.1 Lead-acid batteries for traction - Part 1.Technical requirements GB 8408 Safety Specifications for Large Amusement Facilities GB/T 8923 (all parts) Surface preparation of steel materials before coating - Visual assessment of surface cleanliness GB/T 9286 Paints and varnishes cross-cut test GB/T 12265 Mechanical safety Minimum distance to prevent crushing of human body parts GB/T 13384 General technical requirements for packaging of electromechanical products GB/T 13912 Technical requirements and test methods for hot-dip galvanized coatings on metallic coatings of steel products GB 15763 (all parts) Safety glass for building GB/T 16754 Design principles for emergency stop functions of machinery GB/T 16855.1 Safety of machinery - Safety-related components of control systems - Part 1.General principles for design GB/T 20050-2020 General requirements for inspection and testing of large amusement facilities GB/T 20306 Terminology of Amusement Facilities GB 28526 Electrical safety of machinery Functional safety of safety-related electrical, electronic and programmable electronic control systems GB/T 31467 Test methods for electrical performance of lithium-ion power battery packs and systems for electric vehicles GB/T 31486 Electrical performance requirements and test methods for power batteries for electric vehicles GB/T 34370 (all parts) Non-destructive testing of amusement facilities GB/T 34371 General principles for risk assessment of amusement facilities GB/T 34870.1 Supercapacitors Part 1.General GB 38031 Safety requirements for power batteries for electric vehicles GB/T 41118 Safety of machinery - Guide to the design of safety control systems GB/T 41998 Mechanical electrical safety - Technical requirements for wireless control systems for machinery GB 50661 Code for Welding of Steel Structures ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 18166-2025_English be delivered?Answer: Upon your order, we will start to translate GB/T 18166-2025_English as soon as possible, and keep you informed of the progress. The lead time is typically 3 ~ 5 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 18166-2025_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 18166-2025_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 18166-2025?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 18166-2025 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
