GB 18111-2021 English PDFUS$1079.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB 18111-2021: Gas storage water heater Status: Valid GB 18111: Historical versions
Basic dataStandard ID: GB 18111-2021 (GB18111-2021)Description (Translated English): Gas storage water heater Sector / Industry: National Standard Classification of Chinese Standard: P45 Word Count Estimation: 59,545 Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration GB 18111-2021: Gas storage water heater---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.Gas storage water heater ICS 91.140 P45 National Standards of People's Republic of China Replace GB 18111-2000 Gas storage water heater Released on 2021-08-10 2022-09-01 implementation State Administration for Market Regulation Issued by the National Standardization Management Committee Table of contentsForeword Ⅲ 1 Scope 1 2 Normative references 1 3 Terms and definitions 2 4 Classification and model 3 4.1 Classification 3 4.2 Model 5 5 Material, structure and safety device 5 5.1 Material 5 5.2 Structure 6 5.3 Safety control device 7 5.4 Appearance 8 5.5 Special requirements for condensing gas volumetric water heaters 8 6 Performance requirements 8 6.1 Air tightness of the gas system 8 6.2 Accuracy of heat load 9 6.3 Combustion conditions 9 6.4 Structural tightness 11 6.5 Surface temperature rise 11 6.6 Heat resistance 12 6.7 Flue gas temperature 12 6.8 Hot water performance 12 6.9 Water temperature control device 12 6.10 Water tank capacity and drain valve 13 6.11 Hydrostatic pressure test 13 6.12 Pressure regulator 13 6.13 Ignition device 13 6.14 Exhaust hood strength 14 6.15 Exhaust/air inlet terminal 14 6.16 Spray test 14 6.17 Electrical safety 14 6.18 EMC safety 14 6.19 Vibration resistance 14 6.20 Condensate drainage 14 6.21 NOx content 15 7 Test method 15 7.1 Test conditions and water heater installation 15 7.2 Appearance and external structure inspection 18 7.3 Air tightness test of gas system 18 7.4 Heat load accuracy test 19 7.5 Combustion condition test 20 7.6 Structural leak test 27 7.7 Surface temperature rise test 27 7.8 Heat resistance test 28 7.9 Flue gas temperature test 28 7.10 Hot water performance test 28 7.11 Water temperature control device test 30 7.12 Water tank capacity and drain valve test 31 7.13 Hydrostatic pressure test 32 7.14 Performance test of pressure regulating device 32 7.15 Ignition device test 32 7.16 Exhaust hood strength test 33 7.17 Exhaust/air inlet terminal test 34 7.18 Spray test 35 7.19 Electrical safety test 37 7.20 EMC safety test 37 7.21 Vibration resistance test 37 7.22 Condensate discharge test 37 7.23 NOx content test 37 8 Inspection rules 37 8.1 Factory inspection 37 8.2 Type inspection 38 8.3 Inspection items and non-conformity classification 38 9 Signs and instructions 39 9.1 Sign 39 9.2 Instructions 40 10 Packaging, transportation and storage 42 10.1 Packaging 42 10.2 Transportation 42 10.3 Storage 42 Appendix A (Normative Appendix) Electrical Safety of Water Heaters Using AC Power 43 Appendix B (Normative Appendix) Electromagnetic Compatibility Safety 50 Appendix C (informative appendix) NOx content test 54ForewordThis standard was drafted in accordance with the rules given in GB/T 1.1-2009. This standard replaces GB 18111-2000 Gas Storage Water Heater. Compared with GB 18111-2000, except for editorial changes, the main The technical changes are as follows. a) Modified the scope of application (see Chapter 1, Chapter 1 of the.2000 edition); b) Some terms and definitions have been added, modified and deleted (see Chapter 3, Chapter 3 of the.2000 edition); c) Added water heater classification (see 4.1.5, 4.1.6 and 4.1.7); d) Modified the model compilation method (see 4.2, 4.2.1 of the.2000 edition); e) Modified asbestos, fire viewing hole, dual-purpose water heater waterway, safety control device, combustion noise, maintenance heat load, water tank capacity and electricity Technical requirements for gas safety (see 5.1.3, 5.2.11, 5.2.19, 5.3.4, 6.3.1.7, 6.8.2, 6.10.1 and Appendix A,.2000 edition 5.3.3, 5.1.10, 5.2.5, 6.3.7, 6.10.2, 6.16 and 6.23); f) Added small fire burner, pipe connection thread, natural exhaust type water heater anti-smoke safety protection device, and condensing gas volume Technical requirements for water heaters, electromagnetic compatibility safety and NOx classification (see 5.2.8, 5.2.20, 5.2.21, 5.3.6, 6.3.2.3, 5.5, 6.18, 6.21, Appendix B and Appendix C); g) Deleted the technical requirements for water heater leakage protectors (see 5.2.4 of the.2000 edition); h) Modified the technical requirements and test methods for thermal efficiency and hot water production rate (see 6.8.1, 7.10.1, 6.8.3, 7.10.3,.2000 edition 6.10.1, 7.11.1, 6.10.3 and 7.11.3). Please note that some of the contents of this document may involve patents. The issuing agency of this document is not responsible for identifying patents. This standard was proposed and managed by the Ministry of Housing and Urban-Rural Development of the People's Republic of China. The previous versions of the standard replaced by this standard are as follows. ---GB 18111-2000. Gas storage water heater1 ScopeThis standard specifies the terms and definitions, classification and model, materials, structure and safety of gas volumetric water heaters (hereinafter referred to as water heaters) Device, performance requirements, test methods, inspection rules, signs and instructions, packaging, transportation and storage. This standard applies to gas volumetric water heaters with a rated thermal load of less than 100kW and a rated volume of less than 500L. The fuel gas referred to in this standard refers to artificial gas, natural gas and liquefied petroleum gas specified in GB/T 13611.2 Normative referencesThe following documents are indispensable for the application of this document. For dated reference documents, only the dated version applies to this article Pieces. For undated reference documents, the latest version (including all amendments) is applicable to this document. GB/T 191 Packaging, storage and transportation pictorial signs GB/T 2828.1 Sampling Inspection Procedures by Attributes Part 1.Batch Inspection Sampling Plan Retrieved by Acceptance Quality Limit (AQL) GB/T 4208 Shell protection grade (IP code) GB 4706.1-2005 Safety of household and similar electrical appliances Part 1.General requirements GB/T 4857.23 Basic test of packaging and transportation package Part 23.Random vibration test method GB/T 5013.1 Rubber insulated cables with rated voltages of 450/750V and below Part 1.General requirements GB/T 5023.1 Polyvinyl chloride insulated cables with rated voltages of 450/750V and below Part 1.General requirements GB/T 7306 (all parts) 55° sealed pipe thread GB/T 7307 55° unsealed pipe thread GB/T 9124.1 Steel pipe flange Part 1.PN series GB/T 12113-2003 Measurement method of touch current and protective conductor current GB/T 13611 Classification and basic characteristics of urban gas GB/T 16411-2008 General test methods for household gas appliances GB/T 17626.2-2018 Electromagnetic compatibility test and measurement technology Electrostatic discharge immunity test GB/T 17626.4-2018 Electromagnetic compatibility test and measurement technology Electrical fast transient pulse group immunity test GB/T 17626.5 Electromagnetic compatibility test and measurement technology surge (impact) immunity test GB/T 17626.6 Electromagnetic compatibility test and measurement technology Radio frequency field induced conducted disturbance immunity GB/T 17626.11 Electromagnetic compatibility test and measurement technology Voltage sag, short-term interruption and voltage change immunity test GB/T 17627 High-voltage test technology definition, test and procedure requirements, test equipment for low-voltage electrical equipment GB/T 19212.1-2016 Safety of transformers, reactors, power supply units and their combinations Part 1.General requirements and tests GB/T 20910 Temperature and pressure safety valve for hot water system GB/T 37499 Special requirements for safety and control devices for gas burners and burning appliances Automatic and semi-automatic valves GB/T 38595 Special requirements for safety and control devices for gas burners and burning appliances Mechanical temperature control devices GB/T 38603 Special requirements for safety and control devices for gas burners and burning appliances Electronic controllers GB/T 38693 Special requirements for safety and control devices for gas burners and burning appliances Thermoelectric flameout protection devices GB/T 38756 Special requirements for safety and control devices for gas burners and burning appliances Ignition devices GB/T 39485 Special requirements for safety and control devices for gas burners and burning appliances Manual gas valves ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB 18111-2021_English be delivered?Answer: Upon your order, we will start to translate GB 18111-2021_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB 18111-2021_English with my colleagues?Answer: Yes. The purchased PDF of GB 18111-2021_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB 18111-2021?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB 18111-2021 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
