GB 16487.12-2017 English PDFUS$279.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB 16487.12-2017: Environmental protection control standard for imported solid wastes as raw materials -- Waste and scrap of plastics Status: Obsolete GB 16487.12: Historical versions
Basic dataStandard ID: GB 16487.12-2017 (GB16487.12-2017)Description (Translated English): Environmental protection control standard for imported solid wastes as raw materials -- Waste and scrap of plastics Sector / Industry: National Standard Classification of Chinese Standard: Z70 Word Count Estimation: 7,729 Date of Issue: 2017-12-29 Date of Implementation: 2018-03-01 Older Standard (superseded by this standard): GB 16487.12-2005 Regulation (derived from): Ministry of Environmental Protection Bulletin 2017 No. 88 Issuing agency(ies): Ministry of Environmental Protection, General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China GB 16487.12-2017: Environmental protection control standard for imported solid wastes as raw materials -- Waste and scrap of plastics---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. National Standards of People's Republic of China Replacing GB 16487.12-2005 Imported solid waste used as raw material for environmental protection Control standard - waste plastic Environmental protection control standard for imported solid wastes as raw materials-Waste and scrap of plastics 2017-12-29 Posted 2018-03-01 implementation ICS 13.030.50 Z 70 Ministry of Environmental Protection General Administration of Quality Supervision, Inspection and Quarantine Directory Foreword Ⅱ 1 Scope 1 2 Normative references 1 3 Terms and definitions 1 4 control standards and requirements 2 5 test 3 ForewordIn order to carry out the "Law of the People's Republic of China on Prevention and Control of Environmental Pollution by Solid Wastes", "Prevention and Control of Radioactive Pollution by the People's Republic of China Law "and other laws and regulations to control as a result of the import of waste plastics as raw materials can cause environmental pollution, the development of this standard. This standard specifies the import of waste plastics environmental protection control requirements. This standard is one of the series of control standards for imported solid waste environmental protection, applicable to the import of solid waste can be used as raw materials Catalog on the import of waste plastics management. This standard was first released in.1996, the first revision in.2005, this is the second revision. The main content of this revision. - Modify the definition of waste plastic; - Increasing the requirement for external radiation penetration of imported waste plastics; - Adjusted hazardous waste control requirements; - Adjust the general inclusion control requirements; - revised inspection requirements. From the date of the implementation of this standard, "Imported as a raw material for solid waste environmental protection control standards - waste plastics" (GB 16487.12-2005) Repealed. This standard was revised by the Ministry of Environmental Protection Soil and Environmental Management Division, Science and Technology Standards Division. This standard is mainly drafted by. China Academy of Environmental Sciences. This standard MEP approved on December 29,.2017. This standard since March 1,.2018 implementation. This standard is interpreted by the MEP. Import can be used as raw material for solid waste environmental protection control standards -waste plastic1 scope of applicationThis standard specifies the import of waste plastics environmental protection control requirements. This standard applies to the "import restrictions on imports of solid waste can be used as raw materials directory" in the following waste plastics import management. Customs Product Code Solid Waste Name 3915100000 Waste and scrap of ethylene polymers 3915200000 Styrene polymer waste and scrap 3915300000 Waste and scrap of vinyl chloride polymers 3915901000 Polyethylene terephthalate waste and scrap 3915909000 Other plastic waste and scrap2 Normative referencesThis standard references the following documents in the terms. For undated references, the effective version applies to this standard. GB 5085.1 hazardous waste identification standard corrosive identification GB 5085.2 Hazardous Wastes Identification Standard Acute Toxicity Screening GB 5085.3 hazardous waste identification standard leaching toxicity identification GB 5085.4 Hazardous Waste Identification Standard Flammability Identification GB 5085.5 hazardous waste identification standard reactive identification GB 5085.6 Hazardous Waste Identification Standard Toxic substance content identification SN/T 0570 Import can be used as raw materials waste radioactive contamination inspection procedures SN/T 1791.1 Inspection and Quarantine Procedures for Imported Wastes for Use as Raw Materials - Part 1. Waste Plastics "National List of Hazardous Wastes" (Ministry of Environmental Protection, National Development and Reform Commission, Ministry of Public Security Order No. 39) "Catalog of Solid Waste Restricting Imports as Raw Materials" (MEP, Ministry of Commerce, National Development and Reform Commission Commission, General Administration of Customs, General Administration of Quality Supervision, Inspection and Quarantine notice No. 39 of.2017)3 Terms and definitionsThe following terms and definitions apply to this standard. 3.1 Waste plastics Waste and scrap of plastics Waste plastics referred to in this standard refers to the thermoplastic waste produced in the processing of plastic and plastic products, scrap And defective products. 3.2 Inclusions Carried-waste In the production, collection, packaging and transportation of imported waste plastics mixed with other substances (not including imports of waste plastics Packaging and other materials to be used in transit).4 control standards and requirements4.1 radioactive waste imported plastic pollution control should meet the following requirements. a) Waste plastics are not mixed with radioactive waste; b) The external radiation penetration rate of waste plastics (including packaging) does not exceed the normal natural radiation of the place where the import port is located Background value 0.25 μGy/h; c) The level of α, β radioactive contamination on the surface of the waste plastic is. Maximum detection level of 300 cm2 at any part of the surface The average α does not exceed 0.04 Bq/cm2 and β does not exceed 0.4 Bq/cm2; d) The specific activity of radionuclides in waste plastics should be less than the limits in Table 1. Table 1 radionuclide specific activity limits Nuclide specific activity (Bq/g) Β-γ mixture of unknown ingredients 0.3 Alpha mixture of unknown ingredients 0.1 4.2 Waste plastics are not mixed with abandoned bombs, shells and other explosive weapons ammunition. 4.3 Waste plastics should be strictly limited inclusion of the following inclusions, the total weight should not exceed 0.01% by weight of imported waste plastics. a) waste plastics incinerated or partially incinerated, plastic waste contaminated with extinguishing agents; b) a complete plastic container used; c) Sealed containers; d) Wastes from the National List of Hazardous Wastes; e) According to GB 5085.1 ~ GB 5085.6 identification criteria for identification, where corrosive, toxic, flammable, anti- Other Hazardous Wastes with One or More Hazardous Characteristics 4.4 In addition to the wastes listed in the preceding articles, other inclusions (including waste paper, scrap wood, scrap metal, Waste glass, waste rubber/scrap tires, thermosetting plastics, other metal-coated plastics, unfoamed foam plastics Materials and other waste) mixed, the total weight should not exceed 0.5% of the weight of imported waste plastics.5 test5.1 The standard test to take a random sample test approach to the import of waste containers shipped to take out of the box, dig box, unpacking / Bundles, sorting method of inspection, the bulk of imported waste by sea to open inspection and landing inspection methods, the bulk of land Of imported waste to take out of the box inspection and floor inspection methods, if necessary, sent to the laboratory for testing (including radionuclide ratio Activity, hazardous characteristics, etc.). The results of random sampling test as a whole lot of goods inspection results. 5.2 The standard 4.1 test in accordance with the provisions of SN/T 0570 implementation. 5.3 This standard 4.3e) in accordance with the provisions of GB 5085.1 ~ GB 5085.6 test method. 5.4 The other provisions of this standard test in accordance with SN/T 1791.1 regulations. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB 16487.12-2017_English be delivered?Answer: Upon your order, we will start to translate GB 16487.12-2017_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB 16487.12-2017_English with my colleagues?Answer: Yes. The purchased PDF of GB 16487.12-2017_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB 16487.12-2017?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB 16487.12-2017 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
