GB/T 15092.4-2023 English PDF

US$499.00 · In stock
Delivery: <= 5 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 15092.4-2023: Switches for appliances - Part 2-4: Particular requirements for independently mounted switches
Status: Valid

GB/T 15092.4: Historical versions

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 15092.4-2023	499	Add to Cart	5 days	Switches for appliances - Part 2-4: Particular requirements for independently mounted switches	Valid
GB 15092.4-2006	674	Add to Cart	3 days	[GB/T 15092.4-2006] Switches for appliances -- Part 2: Particular requirements for independently mounted switches	Obsolete
GB 15092.4-1999	679	Add to Cart	3 days	Switches for appliances. Part 2: Particular requirements for independently mounted switches	Obsolete

Similar standards

GB/T 4343.2   GB/T 3883.311   GB/T 3787   GB/T 15092.3   GB/T 15092.2   GB/T 15092.5   

Basic data

Standard ID: GB/T 15092.4-2023 (GB/T15092.4-2023)
Description (Translated English): Switches for appliances - Part 2-4: Particular requirements for independently mounted switches
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: K64
Classification of International Standard: 29.120.40
Word Count Estimation: 26,218
Date of Issue: 2023-08-06
Date of Implementation: 2024-03-01
Older Standard (superseded by this standard): GB/T 15092.4-2006
Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration

GB/T 15092.4-2023: Switches for appliances - Part 2-4: Particular requirements for independently mounted switches

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
ICS 29.120.40 CCSK64 National Standards of People's Republic of China Replace GB/T 15092.4-2006 appliance switch Part 2-4.Special requirements for independently installed switches (IEC 61058-2-4.2018,MOD) Published on 2023-08-06 2024-03-01 Implementation State Administration for Market Regulation Released by the National Standardization Administration Committee

Table of contents

Preface III Introduction V 1 Scope 1 2 Normative reference documents 1 3 Terms and Definitions 1 4 General requirements 2 5 General precautions for testing 2 6 Rating 2 7 Category 2 8 Logo and Documentation 3 9 Protection against electric shock 3 10 Grounding device 4 11 Terminals and Headers 4 12 Structure 4 13 institutions 9 14 Protection against solid foreign objects, water and moisture9 15 Insulation resistance and dielectric strength9 16 Fever 10 17 Durability 10 18 Mechanical strength 10 19 Screws, current-carrying parts and couplings10 20 Clearances, creepage distances, solid insulation and coatings of rigid printed circuit board components10 21 Fire hazard11 22 Anti-rust 11 23 Abnormal operation and fault conditions of switches 11 24 Switching components 11 25 Electromagnetic compatibility (EMC) requirements11 Appendix 15 Appendix K (Normative) Routine Test 16 Appendix L (informative) Sampling test 17 Appendix M (Normative) Switch Family 18 Figure 101 Pull test equipment for cord fixing device 12 Figure 102 Torque test equipment for cord fixtures 13 Figure 103 Bending test equipment 14 Table 3 Switch data and group load 3 Table 101 Rated current of resistive loads and corresponding cable types 6 Table 102 Torque values for torque test 8 Table 103 Torque values for insulating material screws 10

Foreword

This document complies with the provisions of GB/T 1.1-2020 "Standardization Work Guidelines Part 1.Structure and Drafting Rules of Standardization Documents" Drafting. This document is Part 2-4 of GB/T 15092 "Appliance Switches". GB/T 15092 has released the following parts. ---Appliance switches Part 1.General requirements (GB/T 15092.1-2020); ---Appliance switches Part 1-1.Mechanical switch requirements (GB/T 15092.101-2020); ---Appliance switches Part 1-2.Electronic switch requirements (GB/T 15092.102-2020); ---Appliance switches Part 2-1.Special requirements for soft cord switches (GB/T 15092.2-2014); ---Appliance switches Part 2-5.Special requirements for conversion selectors (GB/T 15092.3-2014); ---Appliance switches Part 2-4.Special requirements for independently installed switches (GB/T 15092.4-2006); ---Appliance switches Part 2-6.Special requirements for switches for hand-held and portable power tools and garden machines (GB/T 15092.5- 2021). This document replaces GB/T 15092.4-2006 "Appliance Switches Part 2.Special Requirements for Independently Installed Switches" and is consistent with GB/T 15092.4- Compared with.2006, in addition to structural adjustments and editorial changes, the main technical changes are as follows. a) Delete the clause number 1.1 and delete the contents 1.2 to 1.4 (see 1.1~1.4 of the.2006 version); b) Added normative references to GB/T 5169.11 (see Chapter 2); c) The content of Chapter 7 has been changed. the content of 7.5 has been replaced, 7.11 and 7.22 are not applicable, "7.1.101" has been changed to "7.101", "7.1.102" is changed to "7.102" (see Chapter 7, Chapter 7 of the.2006 edition); d) Table 101 is deleted (see the.2006 version of Table 101); e) Changed the content of Table 3, changing the title of Table 3 "Switching Data Information" to "Switching Data Information and Group Load" (see Table 3,.2006 version of Table 3); f) Delete 10.101 "Switches used in Class I appliances should have a continuous grounding connection device" (see 10.101 in the.2006 edition); g) Change the content of Chapter 11 to "GB/T 15092.1-2020 This chapter applies" (see Chapter 11, Chapter 11 of the.2006 edition); h) Changed the description of the content requirements of 12.107 and 12.108, changed the cable model in Table 101 (see 12.107, 12.108 and Table 101, 12.107, 12.108 and Table 101 of the.2006 edition); i) The content of Chapter 14 has been changed, and the title "Protection against solid foreign objects, dust, water and moisture" has been changed to "Protection against solid foreign objects, water and moisture" Moisture-proof” (see Chapter 14, Chapter 14 of the.2006 edition); j) The version of the referenced standard in Chapter 18 has been changed to "GB/T 16915.1-2014" (see Chapter 18, Chapter 18 of the.2006 edition); k) The content of Chapter 20 has been changed, changing "under consideration" to "GB/T 15092.1-2020 this chapter applies" (see Chapter 20 Chapter, Chapter 20 of the.2006 edition); l) The content of Chapter 21 has been changed, the title "Heat Resistance and Flame Retardancy" has been changed to "Fire Hazard", and relevant technical content has been added to 21.2 (See Chapter 21, Chapter 21 of the.2006 edition); m) Change the title of Chapter 23 "Abnormal operation and fault conditions of electronic switches" to "Abnormal operation and fault conditions of switches" (See Chapter 23, Chapter 23 of the.2006 edition); n) Change the title of Chapter 24 "Components" to "Switching Components" (see Chapter 24, Chapter 24 of the.2006 edition); o) The appendix numbers have been changed, "Appendix R, Appendix S, Appendix T" to "Appendix K, Appendix L, Appendix M" (see Appendix K, Appendix L, Appendix Appendix M, Appendix R, Appendix S, and Appendix T of the.2006 version); p) The table serial numbers were changed, "Table 102, Table 103, and Table 104" were changed to "Table 101, Table 102, and Table 103" (see Table 101, Table 102, Table 103, Table 102, Table 103, and Table 104 of the.2006 version). This document is modified to adopt IEC 61058-2-4.2018 "Appliance Switches Part 2-4.Special Requirements for Independently Installed Switches". The technical differences between this document and IEC 61058-2-4.2018 and their reasons are as follows. ---Replaced IEC 61058-1.2016 (see all chapters of this document) with GB/T 15092.1-2020, which modified the procurement standard, to adapt my country’s technical conditions; ---Replaced IEC 60669-1.2017 (see Chapter 2, Chapter 12, Chapter 18) with GB/T 16915.1-2014, which modified the procurement standard, to Adapt to my country’s technical conditions; ---Replaced IEC 60695-2-11 (see 21.2) with GB/T 5169.11 for the convenience of users; ---14.3 corresponding to IEC 61058-2-4.2018."Moisture treatment is carried out in a humidity box, and the relative humidity of the air in the box is Between 91% and 95%. In all places where the specimens are placed, the air temperature is maintained at any appropriate temperature value between 20°C and 30°C. (t)", considering that some areas in our country have a humid tropical climate, and our country's electrical and electronic products all use (40±2)℃ for moisture-proof testing Therefore, this document stipulates. "Moisture treatment is carried out in a humidity box, and the relative humidity of the air in the box is between 91% and 95%. In In all places where the specimen is placed, the air temperature should be maintained at any appropriate temperature value (t) between 30°C and 40°C (see 14.3). The following editorial changes have been made to this document. ---Chapter 2 deletes IEC 60245-4 and IEC 60227-5 that are not cited in this document (see Chapter 2); ---Changed the note in Chapter 9 to "For the purpose of this article, paint or enamel is not considered as an insulating material" (see Chapter 9); ---9.1 changed to 9.1.1 (see 9.1.1); ---The "soft cable" in the corresponding table in Table 102 is changed to "soft cable/torque" (see Table 102); ---Added the title 19.102 "Screw Replacement of Insulating Materials" (see 19.102); ---Change the clerical error in Chapter 25 "Except for the following content, IEC 61058-1.2018 this chapter applies" to "GB/T 15092.1- 2020 this chapter applies” (see Chapter 25). Please note that some content in this document may be subject to patents. The publisher of this document assumes no responsibility for identifying patents. This document is proposed by the China Electrical Equipment Industry Association. This document is under the jurisdiction of the National Technical Committee for Standardization of Electrical Accessories (SAC/TC67). This document was drafted by. Shanghai Electric Tool Research Institute (Group) Co., Ltd., Zhejiang Jiaben Electronics Co., Ltd., Zhangjiagang Huajie Electronics Co., Ltd., Zhejiang Zhongxun Electronics Co., Ltd., Fade Electric Co., Ltd., Changzhou Yunjie Electric Co., Ltd., Zhejiang Heling Electric Co., Ltd. Division, Zhongshan Yonglian Electrical Products Co., Ltd., China Quality Certification Center, Zhongsheng Shangdong (Shanghai) Testing Technology Co., Ltd., Defeng Electric Innovation Technology Technology Co., Ltd., Yueqing Huiyang Mechanical and Electrical Co., Ltd., Ruian Huatong Appliance Switch Co., Ltd. The main drafters of this document. Chen Ping, Zhang Weichang, Ni Shenglong, Lu Yazhou, Zheng Jianzhong, Zhou Jinlong, Chu Yunyue, Shen Dingli, Feng Jiawen, Liu Chen, Shen Liping, Yang Bin, Wu Shiqing, Lu Jianfeng, Yan Qunhua, Qu Hailiang, Yuan Chengcheng. The previous versions of this document and the documents it replaces are as follows. ---First published as GB 15092.4-1999 in.1999, first revised as GB/T 15092.4-2006 in.2006; ---This is the second revision.

Introduction

GB/T 15092 "Appliance Switches" is a basic standard for product structure safety, performance testing, and material confirmation in the field of appliance switches. It is applicable to Appliance switches that connect or control household or similar electrical appliances and other equipment. Also applicable to appliance switches that provide additional control functions. Off, applicable to both circuits required to evaluate appliance switches and appliance switch functions. GB/T 15092 is intended to consist of the following parts. ---Part 1.General requirements. The purpose is to establish general basic requirements applicable to appliance switches; ---Part 1-1.Mechanical switch requirements. The purpose is to establish general requirements applicable to mechanical switches in appliance switches; ---Appliance switches Part 1-2.Electronic switch requirements (GB/T 15092.102-2020). The purpose is to establish the suitability for appliances General requirements for electronic switches in switches; ---Appliance switches Part 2-1.Special requirements for soft cord switches (GB/T 15092.2-2014). The purpose is to establish the applicable Special requirements for cord switches in appliance switches; ---Part 2-4.Special requirements for independently installed switches. The purpose is to establish the characteristics of switches suitable for independent installation in appliance switches. special requirements; ---Part 2-5.Special requirements for conversion selectors. The purpose is to establish special features suitable for use with change-over selectors in appliance switches. Require; ---Part 2-6.Special requirements for switches for hand-held and portable power tools and garden machines. The purpose is to establish the suitability for appliances Special requirements for switches for hand-held and portable power tools and garden machines. appliance switch Part 2-4.Special requirements for independently installed switches

1 Scope

Except for the following content, Chapter 1 of GB/T 15092.1-2020 applies. Increase. This document applies to electrical appliances and other electrical appliances with a rated voltage not higher than 480V and a rated current not higher than 63A for household or similar purposes. A mechanical or electronic independently installed switch used by the equipment, driven or controlled by hands, feet or other human body movements. This type of switch is operated by a person through an actuator or by an excitation sensor device. The actuator or sensor device is physically or electrically Pneumatically combined with the switch, it can also be configured separately. It may also include actuators or signal transmission between the sensor and the switch, such as. electrical , light, sound or temperature signal transmission. Switches with additional control functions subject to the control of the switch function are within the scope of this document. This document also covers indirectly driven switches, where the operation of the actuator or sensor device is by a remote control, appliance or part of the equipment (e.g. door) to reach. Note 1.Electronic switches can be combined with mechanical switches that provide full disconnection or micro-disconnection. Note 2.Electronic switches without mechanical switches in the power circuit only provide electronic disconnection. Therefore, the circuit on the load side is always considered live. Note 3.Additional requirements may be required for switches used in tropical climates. Note 4.Note that appliance standards may contain additional or alternative requirements for switches. Note 5.In this document, the word "appliance" refers to "appliance or equipment".

2 Normative reference documents

The contents of the following documents constitute essential provisions of this document through normative references in the text. Among them, the dated quotations For undated referenced documents, only the version corresponding to that date applies to this document; for undated referenced documents, the latest version (including all amendments) applies to this document. Except for the following content, Chapter 2 of GB/T 15092.1-2020 applies. Increase. GB/T 5169.11 Fire hazard test for electrical and electronic products Part 11.Glow wire/Hot wire basic test method Ignition of finished products Hot wire flammability test method (GWEPT) (GB/T 5169.11-2017, IEC 60695-2-11.2014, IDT) GB/T 15092.1-2020 Appliance switches Part 1.General requirements (IEC 61058-1.2016, MOD) GB/T 16915.1-2014 Switches for fixed electrical installations for household and similar purposes Part 1.General requirements (IEC 60669- 1.2007,MOD)

3 Terms and definitions

Except for the following content, Chapter 3 of GB/T 15092.1-2020 applies. 3.3 Terms and definitions for different types of switches Increase. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 15092.4-2023_English be delivered?

Answer: Upon your order, we will start to translate GB/T 15092.4-2023_English as soon as possible, and keep you informed of the progress. The lead time is typically 3 ~ 5 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 15092.4-2023_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 15092.4-2023_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version GB/T 15092.4-2023?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 15092.4-2023 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.