GB/T 14193.1-2025 English PDFUS$359.00 ยท In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 14193.1-2025: Rules for the filling of liquefied gas cylinders - Part 1: Industrial gas cylinder Status: Valid GB/T 14193.1: Historical versions
Basic dataStandard ID: GB/T 14193.1-2025 (GB/T14193.1-2025)Description (Translated English): Rules for the filling of liquefied gas cylinders - Part 1: Industrial gas cylinder Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: J74 Classification of International Standard: 23.020.30 Word Count Estimation: 18,164 Date of Issue: 2025-08-29 Date of Implementation: 2026-03-01 Older Standard (superseded by this standard): GB/T 14193-2009 Issuing agency(ies): State Administration for Market Regulation, National Standardization Administration GB/T 14193.1-2025: Rules for the filling of liquefied gas cylinders - Part 1: Industrial gas cylinder---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT14193.1-2025 ICS 23.020.30 CCSJ74 National Standard of the People's Republic of China Replaces GB/T 14193-2009 Regulations on Filling Liquefied Gas Cylinders Part 1.Industrial gas cylinders Released on August 29, 2025 Implementation on March 1, 2026 State Administration for Market Regulation The National Standardization Administration issued Table of ContentsPreface III Introduction IV 1 Scope 1 2 Normative references 1 3 Terms and Definitions 1 4 Basic conditions 1 5 Filling process control 2 6 Filling factor and filling quantity 4 7 Filling Record 8 8 Filling Quality and Safety Traceability Information System 8 Appendix A (Informative) Characteristics of Commonly Used Liquefied Gases and Their Compatibility with Metal Materials 9 Preface This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for standardization work Part 1.Structure and drafting rules for standardization documents" Drafting. This document is Part 1 of GB/T 14193 "Regulations for the filling of liquefied gas cylinders". GB/T 14193 has been published in the following parts. --- Part 1.Industrial gas cylinders. This document replaces GB/T 14193-2009 "Regulations for Filling Liquefied Gas Cylinders". Compared with GB/T 14193-2009, except for the structural adjustment, In addition to the integration and editorial changes, the main technical changes are as follows. --- Changed the scope (see Chapter 1, Chapter 1 of the.2009 edition); --- Added the term "industrial gas cylinder" and its definition, deleted the term "filling factor" and its definition (see Chapter 3,.2009 edition Chapter 3); --- Added "Basic Conditions" (see Chapter 4); --- Changed the content of filling process control (see Chapter 5, Chapter 4 of the.2009 edition); --- Added "Filling factor and filling quantity" (see Chapter 6); --- Changed the filling coefficients of some liquefied gases (including low-pressure liquefied gases and high-pressure liquefied gases) (see Table 1 and Table 3,.2009 Tables 1 and 2 of the same edition); --- Added the saturated vapor pressure and filling coefficient of some low-pressure liquefied gas mixtures (see Table 2); --- Changed the filling record (see Chapter 7, Chapter 6 of the.2009 edition); --- Added "Filling Quality and Safety Traceability Information System" (see Chapter 8). Please note that some of the contents of this document may involve patents. The issuing organization of this document does not assume the responsibility for identifying patents. This document is proposed and coordinated by the National Technical Committee for Standardization of Gas Cylinders (SAC/TC31). This document was drafted by. Hangzhou New Century Mixed Gas Co., Ltd., Dalian Date Gas Co., Ltd., China Special Equipment Testing and Research Institute, Haohua Gas Co., Ltd. Southwest Branch, Jiangsu Tianhai Special Equipment Co., Ltd., Beijing Hepu North Gas Industry Co., Ltd., Zhejiang Provincial Special Equipment Science Research Institute, Singapore Asian Industrial Gases Association Shanghai Representative Office, Guangdong Huate Gas Co., Ltd., Foshan Sanshui Deli Messer Gas Co., Ltd., Lianxiong Investment (Shanghai) Co., Ltd., Air Liquide (China) Investment Co., Ltd., Linde (China) Investment Co., Ltd., Hangzhou Huiheng Energy Technology Co., Ltd. The main drafters of this document are. Zhang Jinbo, Jiang Hongda, Luo Yuguo, Zhang Baoguo, Zhao Junxiu, Wang Yun, Zhou Pengyun, Zhou Haibin, Cheng Xin, Li Xiang, Ru Gaoyi, Ye Shuisheng, Huang Hui, Yin Hao, He Xiaohang, Shen Dong, Sun Bao. This document was first published in.1993 as GB 14193-1993, and was first revised in.2009.This is the second revision and is divided into partsintroductionIn order to meet the needs of industry development, in accordance with the "Standardization Law of the People's Republic of China", "Special Equipment Safety Law" and other laws and regulations, combined with international standards Based on the dynamic situation and domestic practical experience, GB/T 14193 "Regulations on the Filling of Liquefied Gas Cylinders" was systematically revised to GB/T 14193 is intended to consist of two parts. --- Part 1.Industrial gas cylinders. The purpose is to standardize the filling of liquefied gas cylinders for other industrial purposes, except for fuel gas cylinders. --- Part 2.Gas cylinders. The purpose is to standardize the filling of gas cylinders as domestic fuel. The safety and reliability of filling liquefied gas in industrial cylinders are directly related to the safety of people's lives and property, social public security and industry Sustainable development. This revision is based on the principles of "safety-oriented, technology-led, and green-oriented", focusing on improving the filling technology of industrial gas cylinders. Requirements are set to further standardize the filling process control, filling coefficient and filling volume, filling records and filling quality and safety traceability information system of gas cylinders. The implementation of this document will provide a scientific basis for filling units, inspection agencies, users and regulatory authorities of industrial gas cylinders, and help build The whole chain collaborative management system effectively prevents safety risks, promotes the integration of my country's gas cylinder filling industry with international advanced levels, and strengthens the gas industry. Provide technical support for China Construction. Regulations on Filling Liquefied Gas Cylinders Part 1.Industrial gas cylinders1 ScopeThis document specifies the basic conditions, filling process control, filling coefficient and filling conditions for industrial gas cylinders (hereinafter referred to as "gas cylinders") to be filled with liquefied gas. Filling quantity, filling records and filling quality and safety traceability information system. This document is applicable to high-pressure liquefied gas cylinders and cylinders with a saturated vapor pressure of not less than 0.1 MPa (gauge pressure) at the highest operating temperature of the cylinder. Filling of low-pressure liquefied gas cylinders. This document does not apply to the filling of vehicle gas cylinders, fuel gas cylinders and fire-fighting gas cylinders.2 Normative referencesThe contents of the following documents constitute the essential clauses of this document through normative references in this document. For referenced documents without a date, only the version corresponding to that date applies to this document; for referenced documents without a date, the latest version (including all amendments) applies to This document. GB/T 3836.1 Explosive atmospheres Part 1.General requirements for equipment GB/T 7144 Color marking of gas cylinders GB/T 13005 Gas Cylinder Terminology GB 15258 Provisions for the Preparation of Chemical Safety Labels GB/T 15383 Gas cylinder valve outlet connection types and dimensions GB/T 16804 Gas Cylinder Warning Labels TSG07 Licensing Rules for Special Equipment Manufacturing and Filling Units TSG21 Safety Technical Supervision Regulations for Stationary Pressure Vessels TSG23 Gas Cylinder Safety Technical Regulations3 Terms and DefinitionsThe terms and definitions defined in GB/T 13005 and the following apply to this document. 3.1 Gas cylinders other than fuel gas cylinders, vehicle gas cylinders and fire-fighting gas cylinders. 3.2 Residual pressure remainingpressure The remaining gas pressure in the cylinder before filling.4 basic conditions4.1 The filling unit shall meet the licensing conditions of TSG07. 4.2 The filling unit shall establish and maintain a filling quality and safety traceability information system. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 14193.1-2025_English be delivered?Answer: Upon your order, we will start to translate GB/T 14193.1-2025_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 14193.1-2025_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 14193.1-2025_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 14193.1-2025?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 14193.1-2025 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
