GA/T 720-2014 English PDF

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GA/T 720-2014	RFQ	ASK	8 days	Procedures for fire standard development	Obsolete
GA/T 720-2007	RFQ	ASK	3 days	Procedures for fire protection standardization	Obsolete

Similar standards

GB 13495.1   GB 8624   GB/T 8626   GA/T 974.4   

Basic data

Standard ID: GA/T 720-2014 (GA/T720-2014)
Description (Translated English): Procedures for fire standard development
Sector / Industry: Public Security (Police) Industry Standard (Recommended)
Classification of Chinese Standard: C80
Classification of International Standard: 13.220.01
Word Count Estimation: 50,511
Older Standard (superseded by this standard): GA/T 720-2007
Quoted Standard: GB/T 1.1; GB/T 20000.1; GB/T 20000.2; GB/T 20000.3; GB/T 20000.6; GB/T 20000.7; GB/T 20000.8; GB/T 20000.9; GB/T 20001.1; GB/T 20001.2; GB/T 20001.3; GB/T 20001.4; GB/T 20001.10; GB/T 20002.1; GB/T 20002.2; GB/T 20002.3; GB/T 20002.4; GB/T 20003.1; GA/T 1
Regulation (derived from): Announcement of the Ministry of Public Security (2015.02.16); Industry Standard Record Announcement No. 4 of 2015 (No. 184 of the General Administration of Industrial Safety of the People Republic of China)
Issuing agency(ies): Ministry of Public Security
Summary: This standard stipulates the code number, basic requirements, work procedures of each phase and standard revising list, standard project plan adjustment, standard publicizing and daily management. This standard applies to fire national standards and indus

GA/T 720-2014: Procedures for fire standard development

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Procedures for fire standard development ICS 13.220.01 C80 People's Republic of China Public Security Industry Standards Replacing GA/T 720-2007 Fire amend standards program Issued on. 2014-11-13 2014-11-13 implementation People's Republic of China Ministry of Public Security

Table of Contents

Preface Ⅰ 1 Scope 1 2 Normative references 1 3 Label 1 4 Basic requirements 2 5 preparatory phase 2 6 Phase 4 project 7 draft stage 5 8 comments for Stage 6 9 Review Stage 7 10 approval stage 11 11 publication stage 11 12 review stage 11 13 repealed stage 12 14 amendments standard developed 12 15 standard project planning and coordination 13 16 standard Publicizing and daily management 13 Appendix A (informative) standard application documents for the project in style 15 Annex B (informative) Fire standard application form and rationality Shape 22 Annex C (normative) Fire revision of the standard project contracts Shape 24 Annex D (informative) Fire Classification criteria commonly used international standards (ICS) and Chinese Standard Literature Classification 32 Annex E (informative) Summary Standard treatment table style 33 views Annex F (normative) General principles of fire safety standards experts to review the signature 34 Annex G (informative) Standard Form Han Shen Shape 35 Appendix H (informative) Fire approval standard table style 37 Annex I (informative) standard declaration Shape 38 Appendix J (informative) mandatory standards through reports Shape 40 Annex K (informative) standard review form Shape 43 Annex L (informative) standard style table amendments for approval 44 References 47

Foreword

This standard was drafted in accordance with GB/T 1.1-2009 given rules. Instead of the standard GA/T 720-2007 "Standard for Fire and revision procedures", as compared with GA/T 720-2007, in addition to editorial repair Change outside the main technical changes are as follows. --- Modify the list of normative references (see Chapter 2, Section 2 of the 2007 edition); --- Delete terms and definitions (see the 2007 version of Chapter 3); --- Modify the code (see Chapter 3, Chapter 4 of the 2007 edition); --- Information about fire safety standards and revision process of information system management requirements (see 4.5); --- Modify the presentation of the various stages of preparation and revision of standards relating to the outcome of phase and duty cycle (see the edition 4.6,2007 6.1.4,6.2.4,6.3.3,6.4.4,6.5.4,6.6.6); --- Modified documents when applying fire standards project (see 5.1.2, Annex A, 2007 edition 6.1.1.3, Annex A); --- Modified standard signing the project contract provisions (see 6.2, Appendix B, Appendix C, 2007 version 6.2.3, Appendix B, Appendix C); --- Altered the structure of the draft standard when drafting the provisions of the contents (see version 7.2.2,2007 6.3.2.3); --- Modify the contents of the standard preparation instructions written provisions (see version 7.2.3,2007 6.3.2.4); --- Increases the formation of the standard provisions of the documents submitted for review (see 8.3); --- Modify the principles for determining when the review expert to review standard techniques (see edition 9.1.4,2007 6.5.1.3); --- Modify the specific procedures for the technical review of the draft standard for examination regulations (see 9.2,2007 version 6.5.2); --- Remove the approval stage of the provisions of the applicable content into the results of the review and approval process and other work documents validation procedures, and complete Good file for approval of the validation requirements (see 9.3,9.4,2007 version 6.6); --- Increasing the approval phase of the work program (see Chapter 10); --- Increasing the publishing phase of the work program (see Chapter 11); --- Increased repeal phase of the program (see Chapter 13); --- Amendments modify the standard setting procedures (see Chapter 14, 2007 version 7.4); --- Revised standard project plans to adjust the work program (see Chapter 15, 2007 version 6.7); --- Revised standard Publicizing the work program (see 16.1,2007 version 7.1). This standard was proposed by the Ministry of Public Security Fire Department. This standard by the National Standardization Technical Committee based on the standard fire Technical Committee (SAC/TC113/SC1) centralized. This standard was drafted. Ministry of Public Security Fire Bureau, Ministry of Public Security in Tianjin Fire Research Institute, Shanghai Fire Research Institute of Ministry of Public Security, Ministry of Public Security Fire Shenyang Research Institute, Ministry of Public Security of Sichuan Fire Research Institute. The main drafters of this standard. Qu Li, Han Weiping, Li Yanjun, Guo Song, Shen Wen, Hu Rui, easing Yao, Liu Lianxi Chuang Shuang, Zhu Qing, Mao Yiping, Zhang Decheng, Cheng Daobin, boosting Liu, Zhang Xuekui, Lu Zhi Bao, Shen Jian Min, Liu Junjun, Sui Hulin. This standard replaces the standards previously issued as follows. --- GA/T 720-2007. Fire amend standards program

1 Scope

This standard specifies the fire safety standards and revision of the code, the basic requirements of the various stages of the work program and the development of standards amendments, standards Project adjustment, standard Publicizing and daily management. This standard applies to fire national standards and industry standards revision work. Fire place standard revision of the system can be implemented by reference. This standard does not apply to construction Technical Standards on Fire (Fire Code) revision of the system.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document. GB/T 1.1 Standardization Guide Part 1. Standard structure and drafting (All parts) GB/T 20000 standardization Guide GB/T 20001 (all parts) Rules for drafting standards Drafting GB/T 20002 (all parts) standard in specific content Part 1 GB/T 20003.1 special program standards. The standard deals with patents GA/T 1048.1 standard English translation requirements - Part 1. Terminology GA/T 1048.2 standard English translation requirements - Part 2. Standard Name Code 3 Fire amend standards may use the code specified in Table 1 (see GB/T 16733-1997). Table 1 Code Name Code Name Code National Fire Protection Standardization Technical Committee TC113 Public Safety industry standardization Technical guidance document GA /Z National Standardization Technical Committee on Fire It belongs to the Technical Committee SC standard project approval filings PWI Mandatory national standard GB standard project plan NP Recommended national standard GB/T standard draft WD National standardization technical guidance document GB/Z standard manuscript CD Mandatory public safety industry standard GA draft standard for approval DS Recommended public safety industry standard GA/T standards published draft FDS ......

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GA/T 720-2014_English be delivered?

Answer: Upon your order, we will start to translate GA/T 720-2014_English as soon as possible, and keep you informed of the progress. The lead time is typically in 9 seconds (download/delivered in 9 seconds). The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GA/T 720-2014_English with my colleagues?

Answer: Yes. The purchased PDF of GA/T 720-2014_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version GA/T 720-2014?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GA/T 720-2014 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.