GA/T 718-2007 English PDF

US$159.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GA/T 718-2007: Identification criteria to cause casualty of firearms

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GA/T 718-2007	159	Add to Cart	3 days	Identification criteria to cause casualty of firearms

Similar standards

GA/T 424   GA 1210   GA 1051   GA/T 721.2   GA/T 721.3   GA/T 721.1   

Basic data

Standard ID: GA/T 718-2007 (GA/T718-2007)
Description (Translated English): Identification criteria to cause casualty of firearms
Sector / Industry: Public Security (Police) Industry Standard (Recommended)
Classification of Chinese Standard: A92
Classification of International Standard: 13.310
Word Count Estimation: 4,470
Date of Issue: 2007-10-29
Date of Implementation: 2008-03-01
Issuing agency(ies): Ministry of Public Security
Summary: This standard specifies the forensic threshold for firearm forensic science. This standard is applicable to the determination of the energy threshold of the weapon action force of all kinds of barrel firearms, which are driven by gunpowder, gas, etc., using tubular instruments to launch projectiles and are usually less than 20mm in diameter under the Firearms Administration Law of the People Republic of China.

GA/T 718-2007: Identification criteria to cause casualty of firearms

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Identification criteria to cause casualty of firearms ICS 13.310 A92 People's Republic of China Public Security Industry Standards Forensic identification of firearms injury criterion Force Posted 2007-10-29 2008-03-01 implementation People's Republic of China Ministry of Public Security

Foreword

This standard by the National Standardization Technical Committee on Forensic Science and Technology (SAC/TC179) and focal points. This standard was drafted. Public Security Bureau of Nanjing Institute of Criminal Science and Technology, Nanjing University, Ministry of Public Security Evidence Identification Center. The main drafters of this standard. Ji Jun, ROCKETS, Wu Xianghai, Jerez, Xu Cheng, Ban Mansfield, Ma and new, Zhoushun Ping, Jiang Xuemei. Forensic identification of firearms injury criterion Force

1 Scope

This standard specifies the force of scientific identification of firearms injury criterion Tribunal threshold. This standard applies to a gunpowder, gas-powered, use tubular device projectiles "People's Republic of China Firearms Control Act" Determination of various types of fire arms barrel injury force energy is typically less than 20mm diameter threshold.

2 Terms and definitions

The following terms and definitions apply to this standard. 2.1 Gunpowder, gas powered, a tubular instrument projectiles caliber usually less than 20mm of various types of body tube firing weapons. 2.2 Also known as barrel. Refers to a certain direction and speed of the projectile fired tubular parts. You can have the barrel rifling (ie rifled barrel) or not Rifling (ie musket tube). 2.3 A variety of metal or other material projectile fired from inside the chamber. 2.4 The ratio of kinetic energy to its maximum cross-section of the projectile has. 2.5 Firing a firearm projectile living target of injury effect on capacity. The standard refers to the force injury, it is defined according to the 1990 Supreme People Hospital, Supreme People's Procuratorate, Ministry of Public Security, the Ministry of Justice jointly issued the "human injuries appraisal standards" (Secretary [1990] No. 070), "human minor injuries Identification standard (Trial) "[Act (Division) [1990] 6] identified the relevant provisions of the light, injured injury action capability. 2.6 Gunpowder-powered firearms from the ratio of kinetic energy projectiles at muzzle 50cm, a gas-powered firearms projectiles from the muzzle Than the kinetic energy at 30cm. Criterion 3 firearms injuries force 3.1 standard firearms, bullets adaptation standard non-standard firearms, once the non-emission standard bullet casualties caused directly identified as a non-standard firearms Having force injury. 0; ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GA/T 718-2007_English be delivered?

Answer: Upon your order, we will start to translate GA/T 718-2007_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GA/T 718-2007_English with my colleagues?

Answer: Yes. The purchased PDF of GA/T 718-2007_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.