GA/T 1325-2017 English PDFUS$509.00 · In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email. GA/T 1325-2017: Security protection--Face recognition applications--Specifications for acquisition of video and image Status: Valid
Basic dataStandard ID: GA/T 1325-2017 (GA/T1325-2017)Description (Translated English): Security protection--Face recognition applications--Specifications for acquisition of video and image Sector / Industry: Public Security (Police) Industry Standard (Recommended) Classification of Chinese Standard: A91 Classification of International Standard: 13.310 Word Count Estimation: 22,252 Date of Issue: 2017-10-08 Date of Implementation: 2017-12-01 Issuing agency(ies): Ministry of Public Security GA/T 1325-2017: Security protection--Face recognition applications--Specifications for acquisition of video and image---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. Security protection--Face recognition applications--Specifications for acquisition of video and image ICS 13.310 A91 People's Republic of China Public Safety Industry Standard Face recognition application Video image collection specification 2017-10-08 released 2017-12-01 implementation Issued by the Ministry of Public Security of the People's Republic of China Face recognition application Video image collection specification 1 ScopeThis standard specifies the technical requirements and test methods for video or image acquisition for face recognition in security applications. This standard is applicable to the scheme design, equipment selection, construction and installation of video or image acquisition for face recognition in security applications. Engineering acceptance. Face recognition application systems in other fields can be used as reference.2 Normative referencesThe following documents are indispensable for the application of this document. For dated reference documents, only the dated version applies to this article Pieces. For undated references, the latest version (including all amendments) applies to this document. GB/T 25724-2010 Security and surveillance digital video and audio coding and decoding technical requirements GB 50396-2007 Code for design of entrance and exit control system engineering GA/T 367-2001 Technical requirements for video security monitoring system GA 461-2004 Technical requirements for digital photos used in resident ID card preparation GA/T 706-2007 Technical requirements and collection specifications for digital photographs of suspects GA/T 893-2010 Application terminology of security biometric identification GA/T 922.2-2011 Security Face Recognition Application System Part 2.Face Image Data GA/T 1126-2013 Technical requirements for near-infrared face recognition equipment GA/T 1127-2013 General technical requirements for security video surveillance cameras GA/T 1180-2014 Technical Requirements for Entry and Exit Digital Photos GA/T 1326-2017 Security Protection Face Recognition Application Program Interface Specification3 Terms and definitionsThe following terms and definitions defined in GA/T 893-2010 are suitable for this document. 3.1 Face recognition application video image acquisition videoandimageacquisitionforfacerecognitionapplications The process of obtaining videos or images that may contain facial information for face recognition. 3.2 Face recognition video image acquisition equipment deviceofvideoandimageacquisitionforfacerecognition Various devices for face recognition video or image capture. Note. Including facial recognition cameras and cameras. 3.3 Acquisitionsubject A sample of people whose face images meet certain requirements in the field of view. a) Number of pixels. 1.3 million pixels or more, no less than 1280 pixels horizontally, no less than 720 pixels vertical, the larger the field of view, the image The more prime numbers; b) Shutter adjustment. the lowest speed is less than 1/100s; c) Sampling frame rate. the camera is not less than 10 frames/s, and the camera should have continuous shooting function; d) The camera/camera with face detection should be able to automatically select the best face image between frames, and it should be combined with portrait index face image output Features. 4.2.2 Lens The lens used for dynamic capture selection should meet the following requirements. a) The maximum aperture of the auto iris lens is not less than F=1.4; b) The optional lens makes the field of view space XYZ of the collected object's face area as follows, to meet the requirements of 4.1.1 and GA/T 922.2-2011 4.2.1 Requirements. ---600mm≤X≤2800mm; ---450mm≤Y≤2100mm; ---Z≥800mm. c) Refer to formula (A.3) for the selection of lens focal length f. See Appendix C for design examples. 4.2.3 Interface The physical and command interface should meet the following requirements. a) Physical interface. meet the requirements of 5.1.2 in GA/T 1127-2013; b) Command interface. meet the interface requirements of face acquisition equipment in 5.1.4 of GA/T 1326-2017. 4.3 Acquiring images 4.3.1 File format The output file format should meet the following requirements. a) Video compression coding. H.264, H.265, MPEG4, MJPEG or SVAC; b) Image file format. BMP, RAW, JPEG or JPEG2000, the compression ratio of JPEG and JPEG2000 files should not be greater than 25 times. 4.3.2 Image quality The quality of the output face image is determined by 5.1 in GA/T 1344-2016.According to the different face image library deployed, it conforms to GA 461- The frontal photograph requirements of Chapter 4 in.2004, 4.2 in GA/T 1180-2014 and 6.1 in GA/T 706-2007. a) The distance between the two eyes. the registered face image should meet the 60 pixel requirement of 4.1.1 in GA/T 922.2-2011, and the face image should be recognized Meet the 30 pixel requirements of 4.2.1 in GA/T 922.2-2011; b) Face pitch angle. The registered face image should meet the requirements of GA/T 922.2-2011 4.1.3 not greater than ±10°, and recognize the face The image should meet the requirements of GA/T 922.2-2011 in 4.2.2 not greater than ±20°, and there should be auxiliary measures to ensure that the face angle meets the requirements Claim; c) Distortion rate η. not more than 1%; d) Grayscale. the dynamic grayscale range is not less than 180 levels; e) Clarity. The face is clear, without obvious tailing, jitter and other motion blur; f) Noise. The image has no obvious noise; g) Others. Other requirements specified in Chapter 4 of GA/T 922.2-2011. 4.3.3 Image processing The post-processing of the captured image in terms of color and brightness is in accordance with the following requirements. a) Color adjustment. The color of the image can be adjusted appropriately until the skin color of the face is natural and true. When the image is seriously color cast, it should not be forcibly adjusted Its color should be recollected after adjusting the white balance; b) Brightness and highlight processing. The brightness can be adjusted appropriately until the skin color of the face is natural and true, and the image is seriously underexposed or overexposed At this time, the brightness should not be forcibly adjusted, and the exposure parameters of the equipment should be adjusted and then collected again.5 Test method5.1 Collection environment 5.1.1 Installation location The installation locations of different dynamic acquisition equipment for testing are as follows. a) Measure the measured distance L, installation height H1 and pitch angle A of the dynamic collection device from the collection object, refer to Table A.2 and Table A.3 And Table A.4, judge whether it meets the requirements of a) and b) in 4.1.1; b) Observe the installation height H1 of the dynamic acquisition equipment in the entrance and exit control scene from the ground, and judge whether it meets the requirements in 4.1.1 c). 5.1.2 Ambient lighting Observe the lighting conditions of the area around the collection object and the face area, and use a visible light meter to test the area around the collection object and the face Area light intensity, judge whether it meets the requirements of 4.1.2. 5.2 Acquisition equipment 5.2.1 Video/Camera View the camera/camera inspection report installed on site for dynamic acquisition, check the consistency of the acquisition equipment model and the inspection report, Verify the number of pixels of the image sensor, shutter adjustment speed, and sampling frame rate indicators, identify the optimal selection of face images between frames and index face images with both portraits Like output function, judge whether it meets the requirements of a), b), c) and d) in 4.2.1. 5.2.2 Lens View the inspection report of the lens equipped with the dynamic acquisition equipment installed on the site, check the consistency of the lens model and the inspection report, and verify the largest lens Aperture and focal length indicators, to determine whether they meet the requirements of a), b) and c) in 4.2.2. 5.2.3 Interface Visually inspect the physical interface to determine whether it meets the requirements in 4.2.3 a). Send the “device initialization function”, “device connection function”, etc. of the 11 face collection functions of GA/T 1326-2017 to the collection device No less than 3 random functions, check the command interface of the dynamic acquisition device, and judge whether it meets the requirements in 4.2.3 b). 5.3 Acquiring images 5.3.1 File format Check the output file format as follows. a) Check the compression encoding type of the face video file under the specified storage path to determine whether it meets the requirements of a) in 4.3.1; b) Check the output format of the face image file under the specified storage path, and calculate the ratio of the file length before compression to the file length after compression Value, to determine whether it meets the requirements of b) in 4.3.1. 5.3.2 Image quality Test the image quality as follows. a) Collect a front view of the object in the field of view space at the actual measurement distance L from the face recognition video image acquisition device. According to the face image, test the number of pixels between the eyes of the collected object's face image and the pitch angle A to determine whether it meets the requirements in 4.3.2 a) and b) requirements; b) Collect a standard test card M image, make it fill the high-definition display, calculate according to the formula (B.1) in Appendix B, and judge it to be Whether it meets the requirements of c) in 4.3.2; c) Collect a standard test card M image, observe the dynamic gray range of the standard test card M image histogram, and judge whether it meets 4.3.2 d) requirements; d) Visually inspect the sharpness and noise of the collected face image in 5.3.2a), and judge whether it meets the requirements of e), f) and g) in 4.3.2. 5.3.3 Image processing Visually inspect the color adjustment, brightness and highlight processing effect of the post-processed image to determine whether it meets the requirements of a) and b) in 4.3.3. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GA/T 1325-2017_English be delivered?Answer: Upon your order, we will start to translate GA/T 1325-2017_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GA/T 1325-2017_English with my colleagues?Answer: Yes. The purchased PDF of GA/T 1325-2017_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |
