GA/T 1202-2022 English PDFUS$509.00 ยท In stock
Delivery: <= 5 days. True-PDF full-copy in English will be manually translated and delivered via email. GA/T 1202-2022: General technical specifications for fill light device for traffic technology monitoring imaging Status: Valid GA/T 1202: Historical versions
Basic dataStandard ID: GA/T 1202-2022 (GA/T1202-2022)Description (Translated English): General technical specifications for fill light device for traffic technology monitoring imaging Sector / Industry: Public Security (Police) Industry Standard (Recommended) Classification of Chinese Standard: R87 Classification of International Standard: 93.080.30 Word Count Estimation: 22,230 Date of Issue: 2022-09-30 Date of Implementation: 2023-01-01 Older Standard (superseded by this standard): GA/T 1202-2014 Issuing agency(ies): Ministry of Public Security Summary: This standard specifies the classification and naming, technical requirements, test methods, inspection rules, signs, certificates and packaging, installation requirements and glare evaluation of traffic technology monitoring imaging supplementary light devices. This standard applies to the design, production, inspection, installation and glare evaluation of traffic technology monitoring imaging supplementary light devices. The supplementary light components embedded in the traffic technology monitoring equipment can be implemented by reference. GA/T 1202-2022: General technical specifications for fill light device for traffic technology monitoring imaging---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. ICS93:080:30 CCSR87 People's Republic of China Public Security Industry Standards Replace GA/T 1202-2014 General technical requirements for traffic technology monitoring imaging supplementary light device monitoringimaging 2023-01-01 Implementation Released by the Ministry of Public Security of the People's Republic of China table of contentsPreface I 1 Scope 1 2 Normative references 1 3 Terms and Definitions 1 4 Classification and naming 2 5 Technical requirements 3 6 Test method 6 7 Inspection rules 12 8 Marks, certificates of conformity and packaging 13 9 Setting requirements and glare evaluation 14 Appendix A (informative) Schematic diagram of supplementary light area 18 Appendix B (informative) Schematic diagram of the installation of the supplementary light device 19forewordThis document is in accordance with the provisions of GB/T 1:1-2020 "Guidelines for Standardization Work Part 1: Structure and Drafting Rules for Standardization Documents" drafting: This document replaces GA/T 1202-2014 "General Technical Conditions for Imaging Supplementary Light Devices for Traffic Technology Monitoring", and GA/T 1202-2014 In comparison, except for structural adjustments and editorial changes, the main technical changes are as follows: a) Changed the terms and definitions of the traffic technology monitoring imaging supplementary light device (see 3:1, 3:1 of the:2014 edition); b) Delete the terms and definitions of peak illuminance (see 3:6 of the:2014 edition); c) Added the term and definition of call back time (see 3:4); d) Changed the terms and definitions of average illuminance (see 3:5, 3:4 of the:2014 edition); e) Added the terms and definitions of supplementary light area (see 3:7); f) Added classification (see 4:1); g) Changed the naming (see 4:2, 4:1:1 of the:2014 edition); h) Added composition (see 5:1); i) The optical properties have been changed (see 5:3, 4:3 of the:2014 edition); j) Changed the spectral characteristics of the light source (see 5:4, 4:4 of the:2014 edition); k) Changed the flicker feature (see 5:5, 4:5 of the:2014 edition); l) Changed the power consumption requirements (see 5:6, 4:6 of the:2014 edition); m) Changed the power supply adaptability requirements (see 5:7:1, 4:7:1 of the:2014 edition); n) Increased optical radiation safety requirements (see 5:9); o) Changed the climate environment adaptability requirements (see 5:10, 4:9 of the:2014 edition); p) Changed the optical performance test method (see 6:2, 5:3 of the:2014 edition); q) The test method for the spectral characteristics of the light source has been changed (see 6:3, 5:4 of the:2014 edition); r) Changed the flicker characteristic test method (see 6:4, 5:5 of the:2014 edition); s) Added optical radiation safety test methods (see 6:8); t) Changed the low temperature test method (see 6:9:3, 5:9:2 of the:2014 edition); u) Changed the inspection conditions (see 7:2:1, 7:2:1 of the:2014 edition); v) Changed the setting requirements (see 9:1, Chapter 6 of the:2014 edition); w) Added glare evaluation (see 9:2): Please note that some contents of this document may refer to patents: The issuing agency of this document assumes no responsibility for identifying patents: This document is proposed and managed by the National Road Traffic Management Standardization Technical Committee (SAC/TC576): This document is drafted by: Traffic Management Science Research Institute of the Ministry of Public Security, Shanghai Sansi Electronic Engineering Co:, Ltd:, Hangzhou Hikvision Digital Technology Co:, Ltd: Technology Co:, Ltd: The main drafters of this document: Huang Lei, Ma Jingjie, Hu Xinwei, Zhang Jun, Hua Jiafeng, Lu Yu, Miao Luping, Liu Hongmo: The release status of previous versions of this document and the documents it replaces are as follows: ---First published as GA/T 1202-2014 in:2014; --- This is the first revision: General technical requirements for traffic technology monitoring imaging supplementary light device1 ScopeThis document specifies the classification and naming, technical requirements, test methods, inspection rules, signs, and compliance of traffic technology monitoring imaging supplementary light devices: Certification and packaging, setting requirements and glare evaluation: This document is applicable to the design, production, inspection, installation and glare evaluation of traffic technology monitoring imaging supplementary light devices: embedded in transportation technology The supplementary light components in the monitoring equipment can be implemented by reference:2 Normative referencesThe contents of the following documents constitute the essential provisions of this document through normative references in the text: Among them, dated references For documents, only the version corresponding to the date is applicable to this document; for undated reference documents, the latest version (including all amendments) is applicable to this document: GB/T 2423:1 Environmental testing for electrical and electronic products - Part 2: Test methods Test A: Low temperature GB/T 2423:2 Environmental testing for electric and electronic products - Part 2: Test methods Test B: High temperature GB/T 2423:3 Environmental testing - Part 2: Test methods Test Cab: Constant damp heat test GB/T 2423:5 Environmental testing - Part 2: Test methods Test Ea and guidelines: Shock GB/T 2423:10 Environmental testing Part 2: Test method Test Fc: Vibration (sinusoidal) GB/T 2423:17 Environmental testing for electric and electronic products - Part 2: Test method Test Ka: Salt spray GB/T 4208 enclosure protection level (IP code) GB/T 5700 Lighting Measurement Methods GB/T 17626:2 Electromagnetic Compatibility Test and Measurement Technology Electrostatic Discharge Immunity Test GB/T 17626:4 Electromagnetic Compatibility Test and Measurement Technology Electrical Fast Transient Burst Immunity Test GB/T 17626:5 Electromagnetic Compatibility Test and Measurement Technology Surge (Shock) Immunity Test GB/T:20145 Photobiological Safety of Lamps and Lamp Systems GB/T 37958-2019 Optical radiation safety requirements for active lighting components of video surveillance systems CJJ45 Urban Road Lighting Design Standards JJG245 Light Meter Verification Regulations3 Terms and DefinitionsThe following terms and definitions apply to this document: 3:1 The device is used for enhancing the illuminance of the imaging target when the traffic technology monitoring equipment collects the scene image: 3:2 reference axis A straight line that is perpendicular to the horizontal projection surface of the light-emitting surface of the traffic technology monitoring imaging supplementary light device and passes through the geometric center of the light-emitting surface: ...... |
