GA/T 110-2013 English PDF

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GA/T 110-2013	479	Add to Cart	3 days	General requirements for fire protection materials of structural elements	Obsolete
GA 110-1995	559	Add to Cart	3 days	(Temporal population basic information management standard correspondence case code)	Obsolete

Similar standards

GB 4351   GA 602   GB 4066.2   GA 999   

Basic data

Standard ID: GA/T 110-2013 (GA/T110-2013)
Description (Translated English): General requirements for fire protection materials of structural elements
Sector / Industry: Public Security (Police) Industry Standard (Recommended)
Classification of Chinese Standard: C84
Classification of International Standard: 13.220.50
Word Count Estimation: 11,188
Older Standard (superseded by this standard): GA 110-1995
Quoted Standard: GB 8624; GB/T 9969; GB/T 9978.1-2008; GB 14907-2002; GB/T 20285-2006; GA 98-2005; JC/T 626; CECS 24-1990
Regulation (derived from): Building components with the general requirements of fire protection materials, the industry standard revised release; industry standard filing notice 2014 No. 4 (total 172)
Issuing agency(ies): Ministry of Public Security
Summary: This standard specifies the terms and definitions, classification, requirements, test methods, inspection rules and marking, packaging, transportation and storage of fire protection materials for building components. This standard applies to all types of

GA/T 110-2013: General requirements for fire protection materials of structural elements

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
General requirements for fire protection materials of structural elements ICS 13.220.50 C84 People's Republic of China Public Security Industry Standards Replacing GA 110-1995 Building components with fire protection materials General requirements Issued on. 2013-03-11 2013-04-01 implementation People's Republic of China Ministry of Public Security

Foreword

This standard was drafted in accordance with GB/T 1.1-2009 given rules. This standard replaces GA 110-1995 "building components fire spraying material performance test method." This standard GA 110-1995 compared to major changes are as follows. --- Modify the scope (see Chapter 1, Section 11995 edition); --- Modify the terms and definitions (see Chapter 3, Section 31995 edition); --- Increasing the classification (see Chapter 4); --- Modified specimen preparation (see Chapter 4 6.1,1995 version); --- Modify the water resistance requirements and test methods (see 5.2,6.1,1995 version 5.14); --- Increase the circulation of the requirements and test methods for resistance to thermal (see 5.3,6.2); --- Test method by deleting a state in the container, low-temperature storage stability, thermal storage stability, dry density, compressive strength, thermal conductivity The rate of initial drying crack resistance, surface drying time, appearance and color, bond strength, bending resistance, vibration resistance, resistance to freeze-thaw cycles Resistance, salt water, acid and alkali resistance, heat resistance, corrosion of the steel substrate (see the 1995 version of the 5.1 ~ 5.13, From 5.15 to 5.19); --- Modify the fire resistance test method (see 6.5,1995 version 5.20.3). This standard was proposed by the Ministry of Public Security Fire Department. This standard by the National Standardization Technical Committee for fire protection material Technical Committee (SAC/TC113/SC7) centralized. This standard was drafted. Ministry of Public Security of Sichuan Fire Research Institute. The main drafters. Zhang Cai, Cheng Daobin, Nie Tao, Ma Yu, Meng Zhi, Zhou Xiaoyong, Zhang Bin. This standard replaces the standards previously issued as follows. --- GA 110-1995. Building components with fire protection materials General requirements

1 Scope

This standard specifies the terms and definitions of building components fire protection materials, classification, requirements, test methods, inspection rules and signs, including Equipment, transportation and storage. This standard applies to fire protection materials other than wood structure of various types of building elements, does not apply to finishing fire retardant paints.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document. GB 8624 Classification for burning behavior of building materials and products GB/T 9969 General Instructions industrial products GB/T 9978.1-2008 building components resistance test methods - Part 1. General requirements GB 14907-2002 fireproof coatings GB/T 20285-2006 material of smoke toxicity hazard rating GA 98-2005 concrete structure fire retardant coating JC/T 626 fiber reinforced concrete building tablet low alkalinity CECS24-1990 fireproof paint application of technical specifications

3 Terms and Definitions

The following terms and definitions apply to this document. 3.1 Building components with fire protection material fireprotectionmaterialofstructuralelement Covered or coated on the surface of building elements, can improve the fire resistance of a building element, while meeting the appropriate physical and chemical properties and combustion properties Smoke toxicity requested material. Category 4 By material types into building components with fire protection material (hereinafter referred to as the protective material) coating and other classes. a) coating categories. including intumescent or intumescent coating, spray fiber materials, building components can be coated on the surface; b) Other categories include. inorganic (fiber) plates, coils, mineral wool and other materials may be covered or coated on the surface of building components.

5 Requirements

5.1 General Performance protective material should be able to meet the requirements of 5.2 to 5.6, and should be qualified by the production plant quality inspection department. ......

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GA/T 110-2013_English be delivered?

Answer: Upon your order, we will start to translate GA/T 110-2013_English as soon as possible, and keep you informed of the progress. The lead time is typically in 9 seconds (download/delivered in 9 seconds). The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GA/T 110-2013_English with my colleagues?

Answer: Yes. The purchased PDF of GA/T 110-2013_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version GA/T 110-2013?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GA/T 110-2013 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.