GA 863-2010 English PDF

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GA 863-2010	439	Add to Cart	3 days	General requirements for fusible element for fire protection	Obsolete

Similar standards

GB 4351   GA 602   GB 4066.2   GA 999   

Basic data

Standard ID: GA 863-2010 (GA863-2010)
Description (Translated English): General requirements for fusible element for fire protection
Sector / Industry: Public Security (Police) Industry Standard
Classification of Chinese Standard: C84
Classification of International Standard: 13.220.10
Word Count Estimation: 11,139
Date of Issue: 2010-03-08
Date of Implementation: 2010-04-01
Adopted Standard: FM 2031-2001, NEQ; ISO/DIS 10294-4-1999, NEQ
Regulation (derived from): Ministry of Public Security Technical Supervision Committee March 8, 2010 approved the release
Issuing agency(ies): Ministry of Public Security
Summary: This standard specifies the requirements, test methods, inspection rules, and instruction manuals and product data sheets for fusible elements for fire protection. This standard applies to automatic fire extinguishing and fire protection systems as temperature control using fusible alloy components.

GA 863-2010: General requirements for fusible element for fire protection

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
General requirements for fusible element for fire protection ICS 13.220.10 C84 People 's Republic of China Public Security Industry Standard General requirements for fusible alloy components for fire protection 2010-03-08 release 2010-04-01 Implementation Issued by the Ministry of Public Security of the People 's Republic of China

Foreword

The contents of Chapters 3 and 5 of this Standard are mandatory and the rest are recommended. This standard is mainly referred to FM2031 "Fire-resistant thermal element recognition standards" (2001 English version), ISO /DIS10294-4 "fire test Fire protection valves for ventilation systems Part 4. Thermal release mechanism test "(1999 English version) and other standards. Appendix A of this standard is a normative appendix, Appendix B is an informative appendix. This standard is proposed by the Ministry of Public Security Fire Department. This standard is owned by the National Fire Safety Standardization Technical Committee of the National Fire Safety System Subcommittee (SAC/TC113/SC2). The drafting unit of this standard. Ministry of Public Security Tianjin Fire Research Institute. The main drafters of this standard. Wang Yiqing, Song Huan pupil, Zhao Qingsong, Li Yi, Liu Lianxi, Zhang Qiang, Lu Zhengqiang, Gong Yubin, Zhang Lu, Guo This standard is the first release. General requirements for fusible alloy components for fire protection

1 Scope

This standard specifies the requirements, test methods, inspection rules, and instruction manuals and product data sheets for fusible alloy components for fire fighting. This standard applies to automatic fire extinguishing and fire protection systems used as temperature control of the use of fusible alloy components.

2 terms and definitions

The following terms and definitions apply to this standard. 2.1 Made of alloy material, susceptible to heat melting and produce the release of the components. 2.2 The force required to apply to the fusible alloy element is required to ensure normal operation. 2.3 According to the use of environmental conditions, the provisions of the release alloy can produce the temperature of the release action. 2.4 At a certain rate of temperature, the temperature of the fusible alloy element in the liquid bath is released. 2.5 The temperature at which the fusible alloy element operates at the temperature rise rate controlled air and the time taken to reach the operating temperature, as the fusible alloy element A measure of sensitivity.

3 request

3.1 appearance and logo 3.1.1 Fusible alloy components should be neat appearance, no cracks, burrs and scratches and other defects. 3.1.2 fusible alloy components should be marked in the obvious parts of the nominal operating temperature value or in line with the provisions of Table 1 color, and the manufacturer logo or trademark. Marking should be clear and durable. Table 1 fusible alloy components nominal operating temperature level corresponding to the color of the color Nominal operating temperature level/℃ 57 ~ 77 79 ~ 107 121 ~ 149 163 ~ 191 204 ~ 246 260 ~ 302 Colorless white, blue, green and orange 3.2 release action According to the method specified in 4.2 to test, fusible alloy components in the minimum design load (manufacturer's published value), when the fusible alloy by After the hot melt should be able to complete the release of flexible and reliable action. 3.3 Strength 3.3.1 Tests as specified in 4.3.1, fusible alloy elements for sprinklers shall be capable of withstanding a maximum design load of 15 times 100h; fusible alloy components for other fire-fighting devices should be able to withstand 5 times the maximum design load of 150h. ......

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GA 863-2010_English be delivered?

Answer: Upon your order, we will start to translate GA 863-2010_English as soon as possible, and keep you informed of the progress. The lead time is typically in 9 seconds (download/delivered in 9 seconds). The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GA 863-2010_English with my colleagues?

Answer: Yes. The purchased PDF of GA 863-2010_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.