GA 774.3-2008 English PDF

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GA 774.3-2008	239	Add to Cart	3 days	Fingerprint feature specification--Part 3: Way to mark a core on a fingerprint	Obsolete

Similar standards

GA/T 424   GA 1210   GA 1051   GA/T 787   GA/T 765   GA/T 774   

Basic data

Standard ID: GA 774.3-2008 (GA774.3-2008)
Description (Translated English): Fingerprint feature specification--Part 3: Way to mark a core on a fingerprint
Sector / Industry: Public Security (Police) Industry Standard
Classification of Chinese Standard: A92
Classification of International Standard: 13.310
Word Count Estimation: 6,613
Date of Issue: 2008-07-24
Date of Implementation: 2008-07-24
Quoted Standard: GA 773-2008
Issuing agency(ies): Ministry of Public Security
Summary: This standard specifies the location and direction of the fingerprint center point labeling method. This standard applies to fingerprint automatic identification system.

GA 774.3-2008: Fingerprint feature specification--Part 3: Way to mark a core on a fingerprint

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Fingerprint feature specification - Part 3. Way to mark a core on a fingerprint ICS 13.310 A92 People's Republic of China Public Security Industry Standards Fingerprint feature specification Part 3. fingerprint center Tagging Posted 2008-07-24 2008-07-24 implementation People's Republic of China Ministry of Public Security

Foreword

All technical content in this section is mandatory. GA 774 "fingerprint feature specification" is divided into five parts. --- Part 1. Finger direction; --- Part 2. Classification and fingerprint and description; --- Part 3. Tagging fingerprint center; --- Part 4. Finger triangulation point Tagging; --- Part 5. Tagging minutiae points. This is Part 3 GA 774 is. This section of Appendix A normative appendix. This part is proposed by the Ministry of Public Security Criminal Investigation Bureau. The criminal section of the National Criminal Information Technology Standardization Technical Committee Technical Committee (SAC/TC179/SC2) centralized. This section drafted by. Ministry of Public Security Criminal Investigation Bureau, Jiangsu Provincial Public Security Criminal Investigation Bureau, Ministry of Public Security Evidence Identification Center. The main drafters of this section. Wangying Wei, Zhou Xinmin, often Parker, Zhangguo Chen, birch, Yan Xuesong, Yanhui Yong. Ministry of Public Security Criminal Investigation Bureau commissioned this section shall be interpreted. Fingerprint feature specification Part 3. fingerprint center Tagging

1 Scope

This section specifies the labeling method GA 774 fingerprint center point position and direction. This section applies to AFIS.

2 Normative references

The following documents contain provisions which, through reference in this Part of GA 774 constitute provisions of this section. For dated references, All subsequent amendments (not including errata content) or revisions do not apply to this section, however, encourage the agreement on this section Whether the parties can study the latest versions of these documents. For undated reference documents, the latest versions apply to this section. GA 773-2008 AFIS term

3 Terms and Definitions

GA 773-2008 terms and definitions apply to this section established.

4 fingerprint center

4.1 Bow pattern center 4.1.1 arcuate groove center 4.1.1.1 Location Fingerprint pattern within the center, from the bottom up, take the ridge protrusion, maximum curvature, apex arcuate first complete line for the center position, see Figure 1. Figure 1 center position and orientation of the arcuate groove 4.1.1.2 directions From the center point to the foundation of the vertical direction of the line direction as the center, see Figure 1. 4.1.2 Post-shaped pattern center 4.1.2.1 Location Fingerprint pattern within the center, take the upright or inclined straight line to prop up the more complete the first of the arcuate center line of the vertex position, See Figure 2. ......

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GA 774.3-2008_English be delivered?

Answer: Upon your order, we will start to translate GA 774.3-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically in 9 seconds (download/delivered in 9 seconds). The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GA 774.3-2008_English with my colleagues?

Answer: Yes. The purchased PDF of GA 774.3-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.