GA 630-2006 English PDF

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GA 630-2006	239	Add to Cart	2 days	Hatchet for firefighters	Obsolete

Similar standards

GB 4351   GA 602   GB 4066.2   GA 999   

Basic data

Standard ID: GA 630-2006 (GA630-2006)
Description (Translated English): Hatchet for firefighters
Sector / Industry: Public Security (Police) Industry Standard
Classification of Chinese Standard: C84
Classification of International Standard: 13.220.10
Word Count Estimation: 6,696
Date of Issue: 2006-08-29
Date of Implementation: 2007-01-01
Quoted Standard: GB/T 230.1-2004; GB/T 528-1998; GB/T 531-1999; GB/T 1804-2000; GB/T 5305-1985; GB/T 6461-2002; GB/T 8389-2003; GB/T 10125-1997
Regulation (derived from): Ministry of Public Security approved the release of seven public safety industry standards
Issuing agency(ies): Ministry of Public Security
Summary: This standard specifies the specifications, design requirements, performance requirements, test methods, inspection rules, marking, packaging, transportation and storage of fire waist ax. This standard applies to firefighters to wear with, in the fire rescue when used to manually break the non-live obstruction fire waist ax.

GA 630-2006: Hatchet for firefighters

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Hatchet for firefighters ICS 13.220.10 C84 People's Republic of China Public Safety Industry Standard Fire waist axe Released on.2006-08-29 2007-01-01 implementation Ministry of Public Security

Foreword

Chapter 4 of this standard is mandatory and the rest are recommended. This standard is based on the structural characteristics and technical performance of the domestic fire axe and the requirements of the use of firefighting forces in China. The standard is referenced to relevant standards at home and abroad, and based on this, it is proposed through technical analysis. This standard was proposed by the Fire Department of the Ministry of Public Security. This standard is under the jurisdiction of the Fifth Technical Committee of the National Fire Protection Standardization Committee (SAC/TC113/SC5). This standard was drafted. Shanghai Fire Research Institute of the Ministry of Public Security. The main drafters of this standard. Yin Haibo, Ma Weiguang, Li Yuxi, Zhou Kai. Fire waist axe

1 Scope

This standard specifies the specifications, design requirements, performance requirements, test methods, inspection rules, marking, packaging, transportation and storage of fire axe. This standard is applicable to fire axe worn by firefighters and used to manually dismantle non-charged obstacles during firefighting and rescue.

2 Normative references

The terms in the following documents become the terms of this standard by reference to this standard. All dated references, followed by all Modifications (not including errata content) or revisions do not apply to this standard, however, parties to agreements based on this standard are encouraged to study Is it possible to use the latest version of these files? For undated references, the latest edition applies to this standard. GB/T 230.1-2004 Metallic Rockwell hardness test - Part 1. Test methods (A, B, C, D, E, F, G, H, K, N, T Ruler) (ISO 6508-1.1999, MOD) GB/T 528-1998 Determination of tensile stress-strain properties of vulcanized rubber or thermoplastic rubber (eqv ISO 37.1994) GB/T 531-1999 Rubber pocket hardness tester hardness test method (idt ISO 7619.1986) GB/T 1804-2000 General tolerances Linear and angular tolerances without tolerances (eqv ISO 2768-1.1989) GB/T 5305-1985 Hand tool packaging, marking, transportation and storage GB/T 6461-2002 Rating of specimens and test pieces of metals and other inorganic coatings on metal substrates after corrosion test (ISO 10289.1999, IDT) General technical conditions for steel axe GB/T 8389-2003 GB/T 10125-1997 Artificial atmosphere corrosion test salt spray test (eqv ISO 9227.1990)

3 Product Specifications

3.1 type The type of fire waist axe is shown in Figure 1. 1---point knife; 2---撬口; 3---flat blade; 4---axe handle sleeve; 5---handle; 6---Axe handle. Figure 1 Schematic diagram of the fire waist axe ......

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GA 630-2006_English be delivered?

Answer: Upon your order, we will start to translate GA 630-2006_English as soon as possible, and keep you informed of the progress. The lead time is typically in 9 seconds (download/delivered in 9 seconds). The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GA 630-2006_English with my colleagues?

Answer: Yes. The purchased PDF of GA 630-2006_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.