GA 172-2014 English PDFUS$419.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GA 172-2014: Metallic handcuffs GA 172: Historical versions
Basic dataStandard ID: GA 172-2014 (GA172-2014)Description (Translated English): Metallic handcuffs Sector / Industry: Public Security (Police) Industry Standard Classification of Chinese Standard: A94 Classification of International Standard: 13.310 Word Count Estimation: 12,148 Older Standard (superseded by this standard): GA/T 172-2005 Quoted Standard: GA 975-2012 Regulation (derived from): Ministry of Public Security Announcement Public Technology Supervisor [2014] No.24; Announcement on Releasing Public Safety Industry Standard (Year 2014); Industry Standard Record Announcement No. 4 of 2015 (No. 184) Issuing agency(ies): Ministry of Public Security Summary: This standard specifies the terms and definitions, classifications and codes, technical requirements, test methods, inspection rules, packaging, transport and storage of metal handcuffs. This standard applies to metal handcuffs research and development, p GA 172-2014: Metallic handcuffs---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.Metallic handcuffs ICS 13.310 A94 People's Republic of China Public Security Industry Standards Replacing GA/T 172-2005 Metal handcuffs Issued on. 2014-04-02 2014-04-02 implementation People's Republic of China Ministry of Public Security ForewordAll the technical contents of this standard is mandatory. This standard was drafted in accordance with GB/T 1.1-2009 given rules. Since the implementation of this standard at the same time instead of GA/T 172-2005 "metal handcuffs." This standard compared with GA/T 172-2005, the main changes are as follows. --- Change to mandatory standards recommended by the standards; --- Add or modify some of the terms and definitions (see Chapter 3); --- Increased metal handcuffs classification (see 4.1); --- Modified metal handcuffs code composition (see 42, 2005 3.3.); --- Modify the appearance of metal handcuffs technical requirements (see 51, 2005 version 4.1.); --- Increase the technical requirements of the metal handcuffs structure (see 5.2); --- Increase the technical requirements of the metal handcuffs mark (see 5.3); --- Modify the size of the metal handcuffs technical requirements (see 54, 2005 version 4.3.); --- Modified metal handcuffs quality technical requirements (see 55, 2005 4.2.); --- Modified metal handcuffs flexibility of technical requirements (see 56, 2005 version 4.4.); --- Modified metal handcuffs locked targeting technical requirements (see 57, 2005 4.5.); --- Modified metal handcuffs against dials the performance of the technical requirements (see 58, 2005 4.6.); --- Increasing the reinforced metal handcuffs strength of the technical requirements (see 5.9.5); --- Corresponding increase or modification of the test methods (see Chapter 6). This standard was proposed by the Ministry of Public Security Prison Administration Bureau. This standard by the Ministry of Public Security Special Police Equipment Standardization Technical Committee. This standard was drafted. Prison Ministry of Public Security Bureau, the Ministry of Public Security Special Police Equipment Quality Supervision and Inspection Center, Chengdu Jin-equipment limited Ltd., Chengdu Heng Police Equipment Manufacturing Co., Ltd., Yantai Asahi days Police Equipment Co., Ltd., Chongqing Science and Technology Co., Ltd. Shuai. The main drafters of this standard. Ya Xu, Zhang Jinge, Li Yang, Teng Fei, Displaying Harbor, Yangze Jiang, Zhang Jie, Li Gang Kun. This standard replaces the standards previously issued as follows. --- GA/T 172-1998, GA/T 172-2005. Metal handcuffs1 ScopeThis standard specifies the terms and definitions of metal handcuffs, classification and code, technical requirements, test methods, inspection rules, packaging, transport and Storage. This standard applies to the metal handcuffs research and development, production and testing.2 Normative referencesThe following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document. GA 975-2012 Special Police Equipment Terminology3 Terms and DefinitionsThe following terms and definitions apply to this document. 3.1 Metal handcuffs metalichandcuffs Metal chain connected to the wrist shackles armed with metal ring. NOTE. rewrite GA 975-2012, definitions 4.3.1. 3.2 Sheet metal handcuffs platemetalichandcuffs Metal handcuffs handcuffed body connector plate structure. NOTE. rewrite GA 975-2012, definitions 4.3.1.1. 3.3 Drum metal handcuffs columnmetalichandcuffs Handcuffed body connector is metal handcuffs drum structure. NOTE. rewrite GA 975-2012, definitions 4.3.1.2. 3.4 Locked positioning doublelocking Metal handcuffs fan beam can not rotate, while maintaining the functions of a state of engagement. 3.5 Handcuffed Spacing handcuffdistance When fully expanded metal handcuffs, shackled around the center of the distance between the body. 3.6 Anti-allocated net working time workingtimeformanipulationresistancetest Time Actual performance test for anti-allocated, including the tools to transform the time, but does not include possible delays in the testing process ...... |
