GA 1061-2013 English PDF

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GA 1061-2013	RFQ	ASK	3 days	Requirements for fire products consistency inspection	Obsolete

Similar standards

GB 13495.1   GB 8624   GB/T 8626   GA/T 974.4   

Basic data

Standard ID: GA 1061-2013 (GA1061-2013)
Description (Translated English): Requirements for fire products consistency inspection
Sector / Industry: Public Security (Police) Industry Standard
Classification of Chinese Standard: C80
Classification of International Standard: 13.220.01
Word Count Estimation: 127,134
Date of Issue: 2013-03-26
Date of Implementation: 2013-03-26
Quoted Standard: GB/T 19000; GA 1035
Regulation (derived from): Fire products consistency check requirements industry standard publication; industry standard filing notice 2014 No. 4 (total 172)
Issuing agency(ies): Ministry of Public Security
Summary: This standard specifies the terms and definitions, general rules, methods, judgments and treatments for consistency checks of fire protection products. This standard applies to fire product certification initial factory inspection and post-certification s

GA 1061-2013: Requirements for fire products consistency inspection

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Requirements for fire products consistency inspection ICS 13.220.01 C80 People's Republic of China Public Security Industry Standards Fire inspection requirements for product consistency Issued on. 2013-03-26 2013-03-26 implementation People's Republic of China Ministry of Public Security

Table of Contents

Preface Ⅰ Introduction Ⅱ 1 Scope 1 2 Normative references 1 3 Terms and definitions 4 1 General Method 3 5 6 determines 4 7 Treatment 4 Appendix A (normative) Fire product consistency check record 5 Appendix B (normative) Fire control product consistency inspection record 122

Foreword

The standard 4.3 to 4.8 and Chapter 6, Chapter 7 are mandatory, the rest are recommended. This standard was drafted in accordance with GB/T 1.1-2009 given rules. This standard was proposed by the Ministry of Public Security Fire Department. This standard by the National Standardization Technical Committee fixed fire extinguishing system Technical Committee (SAC/TC113/SC2) centralized. This standard is drafted by. Ministry of Public Security Fire Product Conformity Assessment Center. Participated in the drafting of this standard. Tianjin Fire Research Institute of Ministry of Public Security, Ministry of Public Security Shanghai Fire Research Institute, Shenyang Fire Research Institute Ministry of Public Security, the public Abe Sichuan Fire Research Institute, Xi'an System Sensor Electronics Co., Ltd., Shanghai Golden Shield Fire Safety Equipment Co., Ltd., Foshan City, Guangxi Fire Real Co., Ltd., Shenyang Fire electronic equipment factory. The main drafters of this standard. East Jing Fei, Yangzhen Ming, Qu Li, Jinyi heavy, Lu Xi, Liu Lianxi, Yu Wei, Liu Cheng, Feng Wei, Zhang Decheng, Zhangshao Yu, Chengdao Bin, Wang, Lee Lihong, Liu Yuheng, Shen Jian Min, Li Ning, Zhang Lisheng, Wang Yane, Kang Weidong, Hu Ming group, Fu Ping, Li Yi, Bai Diantao, Zhou Xiangyi, yellow legion. This standard is the first release.

Introduction

This standard is based on the Ministry of Public Security and the State Administration for Industry and Commerce, the State Administration of Quality Supervision, "People's Republic of China Certification and Accreditation Regulations" issued a joint "Fire product supervision and management regulations", to meet the needs of fire protection products consistency check job enacted. This standard is promulgated, the ability to improve the quality assurance of fire protection products producers in a fair, standardized and effective elimination on the basis of conduct Anti-product certification, has very important significance. Fire inspection requirements for product consistency

1 Scope

This standard specifies the terms and definitions fire products consistency check, the general principles, methods, assessed and treated. This standard applies to the fire after initial factory inspection and product certification certificate of fire protection products consistency check supervision and management, and can also be used Various types of fire supervision over product quality product consistency verification.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document. GB/T 19000 Quality management systems Fundamentals and vocabulary GA 1035 fire products factory inspection General requirements

3 Terms and Definitions

GB/T 19000 and GA 1035 and define the following terms and definitions apply to this document. 3.1 Type test typeexamination For the whole project to test the product to verify the technical performance and product standards conformity carried out, usually for representative samples. 3.2 Product consistency productconsistency Mass production of products in line with the degree of sample inspection for certification. Note. Product conformance requirements by the product certification and implementation rules, standards and certification bodies relevant requirements of regulations. 3.3 Features productcharacteristic Characteristic appearance, size, function and performance of the product itself has, as well as key design, structure, process, formula ratio, etc. characteristic. 3.4 Product profile productcharacteristicdocument Describe the characteristics of the product related technical information, including documents, drawings, photographs, software, etc..

4 General

4.1 Purpose of inspection The type of inspection and sample volume of certified products in the product nameplate, product critical components and material, product features in line with Carry out other aspects of the degree of consistency checks, effectiveness and quality of products for consistency determination factory production control program run can continue to meet Certification standards provide critical basis. ......

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GA 1061-2013_English be delivered?

Answer: Upon your order, we will start to translate GA 1061-2013_English as soon as possible, and keep you informed of the progress. The lead time is typically in 9 seconds (download/delivered in 9 seconds). The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GA 1061-2013_English with my colleagues?

Answer: Yes. The purchased PDF of GA 1061-2013_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.