GA 1035-2012 English PDF

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GA 1035-2012	879	Add to Cart	5 days	General requirements for factory inspection of fire products	Obsolete

Similar standards

GB 4351   GA 602   GB 4066.2   GA 999   

Basic data

Standard ID: GA 1035-2012 (GA1035-2012)
Description (Translated English): General requirements for factory inspection of fire products
Sector / Industry: Public Security (Police) Industry Standard
Classification of Chinese Standard: C84
Classification of International Standard: 13.220.99
Word Count Estimation: 21,292
Date of Issue: 2012-12-26
Date of Implementation: 2013-01-01
Quoted Standard: GB/T 19000; GB/T 27000; GA 846
Regulation (derived from): Announcement on Publication of Public Safety Industry Standard; Industry Standard Record Announcement No. 3 of 2013 (No. 159)
Issuing agency(ies): Ministry of Public Security
Summary: This standard specifies the terms, definitions, general rules and requirements for inspection of fire-fighting products. This standard applies to the fire products certification bodies for the implementation of fire products certification work carried out

GA 1035-2012: General requirements for factory inspection of fire products

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
General requirements for factory inspection of fire products ICS 13.220.99 C84 People's Republic of China Public Security Industry Standards Fire products factory inspection General requirements 2012-12-26 release 2013-01-01 implementation People's Republic of China Ministry of Public Security

Table of Contents

Introduction Ⅲ Introduction Ⅳ 1 Scope 1 2 Normative references 1 3 Terms and definitions 4 General 3 5 Requirements 4 Appendix A (normative) Factory Quality Assurance Ability 8 Appendix B (normative) Factory product consistency control requirements 11 Annex C (normative) product consistency verification requirements 13 Preparation of Annex D (normative) inspection program requirements 14 Appendix E (normative) site inspection meeting content 16

Foreword

Chapter 4 of this standard, Chapter 5 are mandatory, the rest are recommended. This standard was drafted in accordance with GB/T 1.1-2009 given rules. This standard was proposed by the Ministry of Public Security Fire Department. This standard by the National Standardization Technical Committee on Fire fire detection and alarm Technical Committee (SAC/TC113/SC6) centralized. This standard is drafted by. Ministry of Public Security Fire Product Conformity Assessment Center. This standard participated in the drafting unit. Ministry of Public Security in Tianjin Fire Research Institute, Ministry of Public Security Shanghai Fire Research Institute, Ministry of Public Security Shenyang Fire Research Institute, public Abe Sichuan Fire Research Institute, Xi'an System Sensor Electronics Co., Ltd., Tianjin Shengda security technology limited liability company, Shenzhen Internet security technology Ltd., Shenyang Fire electronic equipment factory, Qingdao Hill House Fire Equipment Factory, Foshan City, Guangxi Fire Industrial Co., Ltd., Shanghai Golden Shield Fire Safety Safety Equipment Co., Ltd. Blue Shield Door Industry in Guangdong Limited. Drafters of this standard. Dong Jing Fei, Zhang Lisheng, Qu Li, Yu Wei, Lu Xi, Zhang Decheng, Jinyi heavy Liuyu Heng, Wang learned, Zhangshao Yu, Li Ning, Cheng Daobin, Shen Jian Min, Li Li Hong, Liu Xin Chuan, HU Qun Ming, Mr Lee, Hsu Chun-yuan, Zhang Yuan Xue, Liang Zhichang, Zhou Xiangyi, Lvzi Li, Liu Lin, Yellow Legion. This standard is the first release.

Introduction

This standard is based and the Ministry of Public Security, SAIC, AQSIQ "People's Republic of China Certification and Accreditation Regulations" issued a joint "Fire Products Supervision and Management Regulations" and the relevant provisions, to meet the needs of fire protection products certified factory inspection work and developed. This standard is promulgated, to improve fire protection products certified factory inspection quality, sure fire product certification fair, standardized and effective To carry out, it has a very important role. Fire products factory inspection General requirements

1 Scope

This standard specifies the terms and definitions fire products factory inspection, General and requirements. This standard applies to fire product certification bodies for the implementation of fire protection product certification undertaken factory inspection activities, it can also be used as nuclear Real fire products factory conditions and conformity assessment activities.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document. GB/T 19000 Quality management systems Fundamentals and vocabulary GB/T 27000 Conformity assessment - Vocabulary and general principles GA 846 fire product identity information management

3 Terms and Definitions

GB/T 19000 and GB/T 27000 define the following terms and definitions apply to this document. 3.1 Applicant applicant Apply for product certification organization. Note 1. In general, the applicant after obtaining certification to become holder. Note 2. Application Agent. instead of applicants apply for certification application procedures of the organization. 3.2 Holder holderofcertificate Holding tissue product certificates. Note. In general, the holder in the certification application stage the applicant. 3.3 Manufacturer manufacturer Control certified manufacturing organization. Note. A manufacturer can have multiple factories. 3.4 Factory factory Certified products for final assembly and/or testing and Enforcement mark the place. Note. There are internal inspection of all places at least the final assembly, routine test, affixed to the product nameplate and logo and other processes. 3.5 OEM factory originalequipmentmanufacturer By the principal to provide design, manufacturing process control and testing requirements for the production of certified products factory. Note. The principal may be the applicant, the holder or the manufacturer. ......

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GA 1035-2012_English be delivered?

Answer: Upon your order, we will start to translate GA 1035-2012_English as soon as possible, and keep you informed of the progress. The lead time is typically in 9 seconds (download/delivered in 9 seconds). The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GA 1035-2012_English with my colleagues?

Answer: Yes. The purchased PDF of GA 1035-2012_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.