FZ/T 92058-2010 English PDF

US$149.00 · In stock
Delivery: <= 2 days. True-PDF full-copy in English will be manually translated and delivered via email.
FZ/T 92058-2010: General specification for plaition device
Status: Valid

FZ/T 92058: Historical versions

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
FZ/T 92058-2010	149	Add to Cart	2 days	General specification for plaition device	Valid
FZ/T 92058-1998	319	Add to Cart	3 days	General specification for plaiting device	Obsolete

Similar standards

FZ/T 93048.1   FZ/T 93019   FZ/T 92059   FZ/T 92067   FZ/T 92061   

Basic data

Standard ID: FZ/T 92058-2010 (FZ/T92058-2010)
Description (Translated English): General specification for plaition device
Sector / Industry: Spinning & Textile Industry Standard (Recommended)
Classification of Chinese Standard: W95
Classification of International Standard: 59.120.50
Word Count Estimation: 5,569
Date of Issue: 2010-12-29
Date of Implementation: 2011-04-01
Older Standard (superseded by this standard): FZ/T 92058-1998
Quoted Standard: GB/T 531.1; GB/T 9239.1-2006; GB/T 22801; FZ/T 90074; FZ/T 92057
Regulation (derived from): Engineering (2010) No. 134
Issuing agency(ies): Ministry of Industry and Information Technology of the People's Republic of China
Summary: This standard specifies the doffing device classification, parameters, requirements and test methods. This standard applies to the flat pieces of fabric export drop cloth dyeing and finishing machinery for generic devices.

FZ/T 92058-2010: General specification for plaition device

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
General specification for plaition device ICS 59.120.50 W95 People's Republic of China textile industry standards Replacing FZ/T 92058-1998 Drop cloth devices General Issued on. 2010-12-29 2011-04-01 implementation Ministry of Industry and Information Technology of the People's Republic of China released

Foreword

Instead of the standard FZ/T 92058-1998 "drop cloth General technical conditions." This standard FZ/T 92058-1998 compared to the main changes are as follows. --- Adjustment and classification parameters; --- Increasing the hardness of rubber-coated surface quality and surface of the rubber roller cloth roll; --- Revised test methods for the adjacent guide roller parallelism. The standard proposed by China Textile Industry Association. This standard by the National Standardization Technical Committee Textile machinery and accessories. This standard was drafted. Zhangjiagang High Putnam Rubber Products Co., Ltd. Jiangsu red Dyeing Machinery Co., Ltd., Jinjiang City, Ji Long Machinery Industry Co., Ltd., Wuxi Textile Machinery Research Institute. The main drafters of this standard. Xu Bin, Zhou Hongjun, Chen Jinping, SOUTHERN Li Liping. This standard replaces the standards previously issued as follows. --- FZ/T 92058-1998. Drop cloth devices General

1 Scope

This standard specifies the classification, parameters, requirements and test methods drop cloth device. This standard applies to the open width fabric dyeing and finishing machines were exported generic device drop cloth.

2 Normative references

The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard. GB/T 531.1 vulcanized rubber or thermoplastic rubber hardness test pushed Part 1. Shore hardness method (Shore hardness) GB/T 9239.1-2006 mechanical vibration steady state (rigid) rotor balance quality requirements - Part 1. specification of tolerance and balance test GB/T 22801 Textile dyeing and finishing machinery and machine guide roller main dimensions and requirements FZ/T 90074 textile machinery products Painting FZ/T 92057 cloth devices General

3 Categories and Parameters

3.1 Classification Press the drop cloth type. width swing drop cloth, drop cloth package type, width and swing dual-use package drop cloth. 3.2 Parameter Table 1. Table 1 Project Parameters Nominal width (B)/mm 1400,1600,1800,2000,2200,2400,2600,2800,3000,3200,3400,3600 Bearing installation center distance (L)/mm L = B 300,400,500 Arm swings/mm 400 ~ 1000 Number of swing/(times/min) 30-70

4 Requirements

4.1 drop cloth holder arm with eccentric center distance deviation of ± 1mm. 4.2 drop cloth frame should be synchronized arm movements, smooth, no bump phenomenon. 4.3 Rack column centerline installation baseline deviation ≤1mm. 4.4 vertical rack post tolerance 1/1000 (benchmark level). 4.5 cloth roller 4.5.1 the cloth roll (before coating) on the axis of the radial runout tolerance shown in Table 2. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of FZ/T 92058-2010_English be delivered?

Answer: Upon your order, we will start to translate FZ/T 92058-2010_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 2 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of FZ/T 92058-2010_English with my colleagues?

Answer: Yes. The purchased PDF of FZ/T 92058-2010_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version FZ/T 92058-2010?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version FZ/T 92058-2010 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.