Home Cart Quotation About-Us
www.ChineseStandard.net
SEARCH

FZ/T 92055-2010 English PDF

Q: How long will the true-PDF of English version of FZ/T 92055-2010 be delivered?

Upon your order, we will start to translate FZ/T 92055-2010_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 2 working days. The lengthier the document the longer the lead time.

Q: Can I share the purchased PDF of FZ/T 92055-2010_English with my colleagues?

Yes. The purchased PDF of FZ/T 92055-2010_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Q: Does the price include tax/VAT?

Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries). Avoidance of Double Taxation Agreements (DTAs) between Singapore and 100+ Countries: https://www.iras.gov.sg/taxes/international-tax

Q: Do you accept my currency other than USD?

Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Q: Should I purchase the latest version FZ/T 92055-2010?

Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version FZ/T 92055-2010 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.

US$149.00 · In stock
Delivery: <= 2 days. True-PDF full-copy in English will be manually translated and delivered via email.
FZ/T 92055-2010: General specification for feeding of material device
Status: Valid

FZ/T 92055: Historical versions

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
FZ/T 92055-2010	149	Add to Cart	2 days	General specification for feeding of material device	Valid
FZ/T 92055-1998	319	Add to Cart	3 days	General specifition for feeding of material device	Obsolete

Similar standards

FZ/T 93048.1 FZ/T 93019 FZ/T 92059 FZ/T 92045 FZ/T 92061

Basic data

Standard ID: FZ/T 92055-2010 (FZ/T92055-2010)
Description (Translated English): General specification for feeding of material device
Sector / Industry: Spinning & Textile Industry Standard (Recommended)
Classification of Chinese Standard: W95
Classification of International Standard: 59.120.50
Word Count Estimation: 5,585
Date of Issue: 2010-12-29
Date of Implementation: 2011-04-01
Older Standard (superseded by this standard): FZ/T 92055-1998
Quoted Standard: GB/T 22801; FZ/T 90074; FZ/T 92056; FZ/T 92060
Regulation (derived from): Engineering (2010) No. 134
Issuing agency(ies): Ministry of Industry and Information Technology of the People's Republic of China
Summary: This standard specifies the classification of devices into the cloth, parameters, requirements and test methods. This standard applies to flat pieces of fabric to the proper tension so that it lies flat in the correct position after entering the channel unit machine dyeing and finishing machinery generic devices.

FZ/T 92055-2010: General specification for feeding of material device

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
General specification for feeding of material device ICS 59.120.50 W95 People's Republic of China textile industry standards Replacing FZ/T 92055-1998 General technical conditions into the cloth Issued on. 2010-12-29 2011-04-01 implementation Ministry of Industry and Information Technology of the People's Republic of China released

Foreword

Instead of the standard FZ/T 92055-1998 "General technical conditions into the cloth." This standard FZ/T 92055-1998 compared to the main changes are as follows. --- Adjustment and classification parameters; --- Revised test methods on the parallelism between the adjacent guide roller tolerances; --- Increasing the tight cloth frame requires two adjacent parallel and tight cloth rack installation baseline parallelism, levelness. The standard proposed by China Textile Industry Association. This standard by the National Standardization Technical Committee Textile machinery and accessories. This standard was drafted. Jianye Dyeing Machinery Co., Ltd. Zhangjiagang City, Jiangsu red Dyeing Machinery Co., Ltd., Jinjiang City, Ji Long Machinery Industry Co., Ltd., Wuxi Textile Machinery Research Institute. The main drafters of this standard. Wang Jiqing, Zhou Hongjun, Chen association, Biandong Hua, Li Liping. This standard replaces the standards previously issued as follows. --- FZ/T 92055-1998. General technical conditions into the cloth

1 Scope

This standard specifies the classification, parameters, requirements and test methods into the fabric device. This standard applies to flat pieces of fabric with appropriate tension, to enable smooth access to after-machine unit in the correct position through dyeing and finishing machinery Use devices.

2 Normative references

The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard. GB/T 22801 Textile dyeing and finishing machinery and machine guide roller main dimensions and requirements FZ/T 90074 textile machinery products Painting FZ/T 92056 fabric on the side of the device FZ/T 92060 suction side

3 Categories and Parameters

3.1 Classification Press into the fabric types. flat pieces of cloth into the unwinding into the fabric. 3.2 Parameter Table 1. Table 1 millimeters Project Parameters Nominal width (B) 1400,1600,1800,2000,2200,2400,2600,2800,3000,3200,3400,3600 Bearing installation center distance (L) L = B 300,400,500

4 Requirements

4.1 guide roller rotating flexible, smooth. 4.2 Each roller surface parallel installation of baseline tolerance 1mm. 4.3 guide roller surface level tolerance 0.5/1000. 4.4 adjacent parallel 0.5mm tolerance between the guide rollers. 4.5 Rack column centerline installation baseline deviation ≤1mm. 4.6 vertical rack post tolerance 1/1000 (benchmark level). 4.7 guide roller shall comply with GB/T 22801 of. 4.8 suction side should be consistent with the provisions of FZ/T 92060 of. 4.9 fabric on the side of the device shall comply with the provisions of FZ/T 92056 of. 4.10 tight cloth frame should be adjusted flexible, easy to operate. Hand wheel adjustment the vertical distance from the ground ≥2000mm. 4.11 tight cloth frame adjacent two parallelism tolerance 0.5mm. 4.12 tight cloth rack surface parallel to the baseline installation tolerances 1mm. ......

Image

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of FZ/T 92055-2010_English be delivered?

Answer: Upon your order, we will start to translate FZ/T 92055-2010_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 2 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of FZ/T 92055-2010_English with my colleagues?

Answer: Yes. The purchased PDF of FZ/T 92055-2010_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version FZ/T 92055-2010?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version FZ/T 92055-2010 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.