FZ/T 92040-2009 English PDFUS$149.00 · In stock
Delivery: <= 2 days. True-PDF full-copy in English will be manually translated and delivered via email. FZ/T 92040-2009: Steel plate grooved drum Status: Valid FZ/T 92040: Historical versions
Basic dataStandard ID: FZ/T 92040-2009 (FZ/T92040-2009)Description (Translated English): Steel plate grooved drum Sector / Industry: Spinning & Textile Industry Standard (Recommended) Classification of Chinese Standard: W93 Classification of International Standard: 59.120.20 Word Count Estimation: 5,545 Date of Issue: 2010-01-20 Date of Implementation: 2010-06-01 Older Standard (superseded by this standard): FZ/T 92040-1995 Quoted Standard: GB/T 191; FZ/T 90001 Regulation (derived from): Engineering (2010) No. 76; industry standard filing Notice 2010 No. 3 (total 123) Issuing agency(ies): Ministry of Industry and Information Technology of the People's Republic of China Summary: This standard specifies the grooved steel product code and the basic structural parameters, requirements, yarn testing, inspection rules, marking and packaging, transportation and storage. This standard applies to GC grooved plate, namely ordinary steel plate with grooved drum winder. This standard does not apply external technical exchange or foreign trade acceptance. FZ/T 92040-2009: Steel plate grooved drum---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.Steel plate grooved drum ICS 59.120.20 W93 People's Republic of China textile industry standards Replacing FZ/T 92040-1995 Grooved steel Issued on. 2010-01-20 2010-06-01 implementation Ministry of Industry and Information Technology of the People's Republic of China released ForewordInstead of the standard FZ/T 92040-1995 "steel grooved drum." The main difference compared with the standard FZ/T 92040-1995 as follows. --- Increasing the standard English name; --- Increasing the foreword; --- Increase in Chapter 1, "scope"; --- Increased Chapter 2, "Normative references", a reference to the original standard has been revised standards converted to current standards; --- Increased marking, transportation and so on; --- Some other editorial changes. Please note that some of the content of this standard may involve patents. The standard release mechanism does not assume the responsibility to identify these patents. The standard proposed by China Textile Industry Association. This standard by the National Standardization Technical Committee Textile machinery and accessories. This standard was drafted. Tianjin Hongda Textile Machinery Company Limited. The main drafters of this standard. Left English, Ding Xiuhua. This standard replaces the standards previously issued as follows. --- FJ/JQ110-1987; --- FZ/T 92040-1995. Grooved steel1 ScopeThis standard specifies the product code and the basic structural parameters grooved steel, requiring the yarn guide testing, inspection rules, logo and packaging, transportation, Storage. This standard applies to GC grooved plate, namely ordinary steel grooved drum winder used. This standard does not apply external technical exchange or foreign trade acceptance.2 Normative referencesThe following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard. GB/T 191 Packaging - Pictorial signs FZ/T 90001 Textile machinery Packaging3 product code and the basic structural parameters3.1 Product Code Code notation. GC Grooved steel Code (phonetic alphabet ) yarn guide groove laps yarn guide groove stroke Breed type code (using the Latin alphabet represented ) Example. GC steel grooved code Yarn guide groove laps laps 2.5 Yarn guide groove 155mm stroke Breed type code (see Table 1) 3.2 The basic structural parameters of steel grooved Grooved steel plate is punched metal grooved steel welded structure, shown in Figure 1. Code and main parameters in Table 1. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of FZ/T 92040-2009_English be delivered?Answer: Upon your order, we will start to translate FZ/T 92040-2009_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 2 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of FZ/T 92040-2009_English with my colleagues?Answer: Yes. The purchased PDF of FZ/T 92040-2009_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version FZ/T 92040-2009?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version FZ/T 92040-2009 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
