FZ/T 90010-2020 English PDFUS$279.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. FZ/T 90010-2020: Electric motor base axle size Status: Valid FZ/T 90010: Historical versions
Basic dataStandard ID: FZ/T 90010-2020 (FZ/T90010-2020)Description (Translated English): Electric motor base axle size Sector / Industry: Spinning & Textile Industry Standard (Recommended) Classification of Chinese Standard: W92 Classification of International Standard: 59.120 Word Count Estimation: 12,192 Date of Issue: 2020 Date of Implementation: 2020-10-01 Issuing agency(ies): Ministry of Industry and Information Technology of the People's Republic of China Summary: This standard specifies the dimensions and working drawings of the bottom rail of the motor. This standard applies to the bottom rails of electric motors for textile machinery. FZ/T 90010-2020: Electric motor base axle size---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.(Motor bottom rail size) ICS 59.120 W92 People's Republic of China Textile Industry Standard Replace FZ/T 90010-2009 Motor bottom rail size 2020-04-16 released 2020-10-01 implementation Issued by the Ministry of Industry and Information Technology of the People's Republic of China ForewordThis standard was drafted in accordance with the rules given in GB/T 1.1-2009. This standard replaces FZ/T 90010-2009 "Motor Bottom Rail Dimensions". Compared with FZ/T 90010-2009, except for editorial changes In addition, the main technical changes are as follows. --- The bottom rail type of the motor is classified (divided into type A and type B) (see 3.1); ---The part number and size in Figure 1 and Figure 2 are marked and explained; ---Optimized the installation size specifications of the motor bottom rail, and optimized the specifications of the studs in the standard (see Table 1); ---Added technical requirements to the bottom rail parts drawing (see Appendix A.1); ---The motor model involved in the application examples in Appendix B is changed to the motor center height. This standard was proposed by the China National Textile and Apparel Council. This standard is under the jurisdiction of the National Textile Machinery and Accessories Standardization Technical Committee (SAC/TC215), and is managed by the National Industrial Machinery Electrical System Standardization Technical Committee Textile Machinery Electrical Sub-Technical Committee (SAC/TC231/SC1) professional management. Drafting organizations of this standard. Qingdao Hongda Textile Machinery Co., Ltd., Shaoyang Textile Machinery Co., Ltd., Wuxi Hengda Motor Co., Ltd., Beijing Jingwei Textile Machinery New Technology Co., Ltd., Jingwei Textile Machinery Co., Ltd. The main drafters of this standard. Shao Songjuan, Tang Jielian, Wang Mingxing, Liu Tie, Ju Jing. The previous versions of the standard replaced by this standard are as follows. ---FJ175-79; ---FZ/T 90010-1991, FZ/T 90010-2009. Motor bottom rail size1 ScopeThis standard specifies the size and working drawing of the motor bottom rail. This standard applies to the bottom rails of motors used in textile machinery.2 Normative referencesThe following documents are indispensable for the application of this document. For dated reference documents, only the dated version applies to this article Pieces. For undated references, the latest version (including all amendments) applies to this document. GB/T 95 Flat Washer Class C GB/T 197 Common thread tolerance GB/T 898 double-ended stud bm=1.25d GB/T 5783 Hexagon head bolts full thread GB/T 6170 Ⅰ type hexagon nut3 Type and size3.1 Type Types are generally divided into Type A and Type B, as shown in Figure 1 and Figure 2. Description. L1---the length of the bottom rail; 1 --- bottom rail; 2 --- Slider; 3 ---stud; 4 ---washer; 5 ---nut; 6 ---bolt; 7 --- Claw. Figure 1 Type A (applicable to L1≤800mm) ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of FZ/T 90010-2020_English be delivered?Answer: Upon your order, we will start to translate FZ/T 90010-2020_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of FZ/T 90010-2020_English with my colleagues?Answer: Yes. The purchased PDF of FZ/T 90010-2020_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version FZ/T 90010-2020?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version FZ/T 90010-2020 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
