FZ/T 70008-2012 English PDFUS$149.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. FZ/T 70008-2012: Test method for cover factor of wool knitted fabrics Status: Valid FZ/T 70008: Historical versions
Basic dataStandard ID: FZ/T 70008-2012 (FZ/T70008-2012)Description (Translated English): Test method for cover factor of wool knitted fabrics Sector / Industry: Spinning & Textile Industry Standard (Recommended) Classification of Chinese Standard: W63 Classification of International Standard: 59.080 Word Count Estimation: 6,613 Older Standard (superseded by this standard): FZ/T 70008-1999 Quoted Standard: GB/T 6529; GB/T 8170 Regulation (derived from): Ministry of Industry and Information Technology Bulletin 2012 No. 70; industry standard filing Notice 2013 No. 2 (No. 158 overall) Issuing agency(ies): Ministry of Industry and Information Technology of the People's Republic of China Summary: This standard specifies the determination of wool knitted fabric weave density coefficient test methods. This standard applies to plain, rib and interlock knitted wool organizations. FZ/T 70008-2012: Test method for cover factor of wool knitted fabrics---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.Test method for cover factor of wool knitted fabrics ICS 59.080 W63 People's Republic of China textile industry standards Replacing FZ/T 70008-1999 Standard Test Method for Density factor knitted wool woven Issued on. 2012-12-28 2013-06-01 implementation Ministry of Industry and Information Technology of the People's Republic of China released ForewordThis standard was drafted in accordance with GB/T 1.1-2009 given rules. This standard is a revision of FZ/T 70008-1999 "wool knitted weave density coefficient test method", and FZ/T 70008-1999 Compared to the main changes are as follows. --- Increasing the normative references; --- Increasing the terms and definitions; --- Cancel the original 2.2 standard described; --- Original standard 3.1 "The following applies to pre-tension or woolen worsted yarn" to 5.1.2, "according to yarn count, select test Experience with pre-tension "; --- Modify the selected test pre-tension yarn linear density sub-file; --- Standard atmospheric conditions according to GB/T 6529 execution; --- Test procedure increases with pre-selected test method tension; --- Cancel weave density coefficient calculation units, increase the computational result rounding provisions; --- Cancellation Appendix A. The standard proposed by China Textile Industry Association. This standard by the National Standardization Technical Committee Textile Wool Textile Technical Committee. This standard was drafted. Beijing Woolen Textile Institute of Science and test center, sweater Zhejiang Quality Inspection Center. The main drafters of this standard. Li Lirong, mine red, Mao Minghua. This standard replaces the standards previously issued as follows. --- FZ/T 70008-1999. Standard Test Method for Density factor knitted wool woven1 ScopeThis standard specifies the test methods for wool knitted weave density coefficient of determination. This standard applies to plain, rib and double rib stitch wool jersey.2 Normative referencesThe following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document. GB/T 6529 Textiles Standard conditioning and testing atmosphere GB/T 8170 repair value expressed about the rules and limit values and judgment3 Terms and DefinitionsThe following terms and definitions apply to this document. 3.1 Weave density coefficient coverfactor Tightly woven, knitted reflect the degree parameter, and knitted yarn linear density, related to the length of the coil. Principle 4 Remove the fabric from the known number of coils of yarn, apply an appropriate tension to remove the curl, measure the yarn length and weighed to calculate the yarn line density. Then by the yarn count and loop length is calculated weave density factor.5 equipment and instruments5.1 yarn length tester 5.1.1 The instrument in an appropriate strain relief crimp yarn weaving process since the formation, without creating additional elongation, and measured for some Yarn length. 5.1.2 The yarn linear density, select pre-tension test, see Table 1. Table 1 Pre-tension selection Yarn count tex Pre tension ≤60 4 0.2 × yarn linear density (tex) > 60 12 0.07 × yarn linear density (tex) ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of FZ/T 70008-2012_English be delivered?Answer: Upon your order, we will start to translate FZ/T 70008-2012_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of FZ/T 70008-2012_English with my colleagues?Answer: Yes. The purchased PDF of FZ/T 70008-2012_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version FZ/T 70008-2012?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version FZ/T 70008-2012 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
