FZ/T 64033-2014 English PDFUS$179.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. FZ/T 64033-2014: Spun-thermal bonded nonwoven Status: Valid
Basic dataStandard ID: FZ/T 64033-2014 (FZ/T64033-2014)Description (Translated English): Spun-thermal bonded nonwoven Sector / Industry: Spinning & Textile Industry Standard (Recommended) Classification of Chinese Standard: W59 Classification of International Standard: 59.080.30 Word Count Estimation: 7,712 Date of Issue: 12/24/2014 Date of Implementation: 6/1/2015 Older Standard (superseded by this standard): FZ/T 64004-1993 Quoted Standard: GB/T 250; GB/T 4666; GB/T 5709; GB/T 24218.1; GB/T 24218.3 Regulation (derived from): Ministry of Industry and Information Technology Notice 2014 No. 83 Issuing agency(ies): Ministry of Industry and Information Technology of the People's Republic of China Summary: This standard specifies the spunbond nonwovens technical requirements, test methods, inspection rules, packaging, labeling, transport and storage. This standard applies to polypropylene, polyester as the main raw material, using melt spinning into the net FZ/T 64033-2014: Spun-thermal bonded nonwoven---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.Spun-thermal bonded nonwoven ICS 59.080.30 W59 People's Republic of China textile industry standards Section instead of FZ/T 64004-1993 Hot-rolled spunbond nonwovens Issued on. 2014-12-24 2015-06-01 implementation Ministry of Industry and Information Technology of the People's Republic of China released ForewordThis standard was drafted in accordance with GB/T 1.1-2009 given rules. Instead of the standard FZ/T 64004-1993 "thin bonding nonwoven fabric" in spunbond nonwovens. This standard FZ/T 64004-1993 spunbond nonwovens compared to the requirements, the main differences are as follows. --- The separated FZ/T 64004-1993 spunbond nonwovens section to "hot-rolled spunbond non-woven fabric" as the standard name; --- On the scope of the table has been modified; --- References to normative standard references, the referenced standard replace the corresponding national standards; --- Delete the original standard product classification and terminology of two chapters; --- Technical requirements "mechanical performance" with "intrinsic quality" to delete the first-class goods and qualified for classification, increasing the unit area Product quality coefficient of variation, elongation at break; --- Technical requirements "appearance of defects" to "visual quality", adds color, bad trimming, soft pleated and lumps, turning net, oil And splicing times to frit, poor lapping, foreign bodies and joints; --- Standard test method replace the corresponding national standards, increase the content of the test method; --- Modify the sampling inspection rules, determining the intrinsic quality, appearance and quality determination result of the determination; --- Signs, packaging, transportation and storage of content has been modified. The standard proposed by China Textile Industry Association. This standard by the National Standardization Technical Committee Textile (SAC/TC209) centralized. This standard was drafted. Zhejiang Huayin Nonwovens Co., Ltd., Jiangxi State Bridge Industrial Co., Ltd., China Textiles Industry Association Council Ouhai Changlong Chemical Fiber Plant, Jinjiang Xingtai Nonwoven Products Co., Ltd., Foshan City Salong Pute kinds of materials Co., Ltd., Zhejiang Three new Textile Group Co., Ltd. Shandong Thai-Peng non-woven, non-woven fabric Burghardt Dalian Group Co., Ltd., Shandong Chun Fu Nonwovens Ltd., Nanhai, Foshan City shall be blessed Nonwovens Co., Hongda Research Institute Co., Ltd., Dalian Huayang Engineering Co., Ltd., Quanzhou East Xiang Chemical Textile Co., Ltd. The main drafters of this standard. Venus, Zhang Chuang, Zhang Zhuanxiong, Wu Boming, LI Gui-mei, Chen Lidong, Shizhong Qiu, namely Jianzhong, Yan Huarong, WH Tang, Zhang Jing, Gu ZU Wei, Ma Lijuan, Huang Wensheng, Hu Fang, Zeng Shijun, Ding Qiwei, Zhao Jinyu. This standard replaces the standards previously issued as follows. --- FZ/T 64004-1993. Hot-rolled spunbond nonwovens1 ScopeThis standard specifies the hot rolling spunbond nonwovens technical requirements, test methods, inspection rules, packaging, labeling, transport and storage. This standard applies to polypropylene, polyester as the main raw material, melt spinning into the net, made of hot rolled bonded nonwoven fabric.2 Normative referencesThe following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document. GB/T 250 textile color fastness test assessing change in color like the gray card Determination of GB/T 4666 Textiles length and width of GB/T 5709 Textiles Nonwovens term Determination of mass per unit area. GB/T 24218.1 Textiles nonwovens Test methods - Part 1 GB/T 24218.3 Nonwoven Textiles - Test methods - Part 3. breaking strength and elongation measurement (strip method)3 Technical requirements3.1 intrinsic quality 3.1.1 Hot-rolled polypropylene spunbond nonwovens inherent quality requirements to comply with Table 1. Table 1 hot-rolled polypropylene spunbond nonwovens internal quality requirements project Specifications/(g/m2) 1,015,203,040,506,070 8,090,100,110,120,150 Width deviation/mm ± 3 Partial mass per unit area Slip /% ± 8 ± 7 ± 5 ± 4 ± 3 Variation of mass per unit area coefficient/% ≤7 ≤6 Breaking strength/N 13 2,025,406,075,100,110,120 135,140,145,150,180 9,141,627,355,565,758,090 100 110 120 130. Elongation at break /% ≥30 Note. Specifications expressed in mass per unit area. Specifications Table dimension between adjacent between specifications, according to the interpolation method to calculate the corresponding evaluation indicators; out of spec Products, as per contract. 3.1.2 Hot-rolled polyester spunbond nonwovens intrinsic quality requirements shall be in accordance with Table 2. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of FZ/T 64033-2014_English be delivered?Answer: Upon your order, we will start to translate FZ/T 64033-2014_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of FZ/T 64033-2014_English with my colleagues?Answer: Yes. The purchased PDF of FZ/T 64033-2014_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |