FZ/T 51004-2011 English PDFUS$419.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. FZ/T 51004-2011: Fiber grade polycaprolactam chip Status: Valid
Basic dataStandard ID: FZ/T 51004-2011 (FZ/T51004-2011)Description (Translated English): Fiber grade polycaprolactam chip Sector / Industry: Spinning & Textile Industry Standard (Recommended) Classification of Chinese Standard: W52 Classification of International Standard: 59.060.20 Word Count Estimation: 18,170 Date of Issue: 2011-05-18 Date of Implementation: 2011-08-01 Quoted Standard: GB/T 191; GB/T 625; GB/T 6678-2003; GB/T 6679; GB/T 8170 Regulation (derived from): Ministry of Industry and Information Technology Bulletin No. 13 of 2011 Issuing agency(ies): Ministry of Industry and Information Technology of the People's Republic of China Summary: This standard specifies the fiber grade chips polycaprolactam terms and definitions, classification and nomenclature, technical requirements, test methods, inspection rules, marking, packaging, transport and storage. This standard applies to caprolactam as raw materials, the production of bright, semi-dull and dull fiber grade polycaproamide slice, referred polyamide (nylon) 6 slices. FZ/T 51004-2011: Fiber grade polycaprolactam chip---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.Fiber grade polycaprolactam chip ICS 59.060.20 W52 People's Republic of China textile industry standards Fiber grade polycaprolactam chips Issued on. 2011-05-18 2011-08-01 implementation Ministry of Industry and Information Technology of the People's Republic of China released ForewordThis standard was drafted in accordance with GB/T 1.1-2009 given rules. The standard proposed by China Textile Industry Association. This standard by the Shanghai textile industry technical supervision of the centralized. This standard was drafted. Guangdong Xinhui Meida Nylon Co., Ltd., Kam matter of Zhejiang Chemical Fiber Co., Ltd., Shanghai Textile Industry Technology Operation Authority, Zhejiang Huajian nylon co. The main drafters of this standard. Mao Xinhua, He Shaofeng, Zhangyou Guo, Li Hongjie, Yu Jianpeng. Fiber grade polycaprolactam chips1 ScopeThis standard specifies the fiber grade polycaprolactam slice of terms and definitions, classification and naming, technical requirements, test methods, inspection rules, Signs, packaging, transport and storage. This standard applies to caprolactam as raw materials to produce bright, semi-dull and dull fiber grade polycaprolactam chips, referred to as nylon (Nylon) 6 slices.2 Normative referencesThe following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document. GB/T 191 Packaging - Pictorial signs GB/T 625 chemical reagent sulfuric acid GB/T 6678-2003 General Principles for Sampling Chemical Products GB/T 6679 General rules for sampling solid chemical products GB/T 8170 repair value expressed about the rules and limit values and judgment The State Administration of Quality Supervision, Inspection and Quarantine Order [2005] No. 75 prepackaged goods measured Regulatory Measures3 Terms and DefinitionsThe following terms and definitions apply to this document. 3.1 Bright polycaprolactam chips brightpolycaprolactamchip Titanium dioxide content of less than or equal to 0.05% of polycaprolactam slices. 3.2 Semi-dull chips semi-dulpolycaprolactamchip polycaprolactam Polycaprolactam chips titanium dioxide content greater than 0.1% to less than 0.6%. 3.3 Dull polycaprolactam chips fuldulpolycaprolactamchip Titanium dioxide content greater than or equal to 1.20 percent of the polycaprolactam chips. 3.4 Abnormal slice irregularchip A length greater than or equal to four times the normal slice thickness, width or diameter greater than or equal to twice the normal chips polycaprolactam chips. 3.5 Production batch productlot Raw materials, the same process conditions and product specifications, the continuous production of the product within a certain time. 3.6 Inspection Lot testlot To test the production characteristics and stability batches of product quality, the use of periodic or determined according to the production of products. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of FZ/T 51004-2011_English be delivered?Answer: Upon your order, we will start to translate FZ/T 51004-2011_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of FZ/T 51004-2011_English with my colleagues?Answer: Yes. The purchased PDF of FZ/T 51004-2011_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |