FZ/T 50017-2011 English PDF
Basic dataStandard ID: FZ/T 50017-2011 (FZ/T50017-2011)Description (Translated English): Testing method for flame retardant property of polyester fibers. Oxygen index Sector / Industry: Spinning & Textile Industry Standard (Recommended) Classification of Chinese Standard: W50 Classification of International Standard: 59.060.20 Word Count Estimation: 17,141 Date of Issue: 2011-05-18 Date of Implementation: 2011-08-01 Quoted Standard: GB/T 3291.1; GB/T 3291.3; GB/T 3863; GB/T 3864; GB/T 6502; GB/T 14334 Regulation (derived from): Ministry of Industry and Information Technology Bulletin No. 13 of 2011 Issuing agency(ies): Ministry of Industry and Information Technology of the People's Republic of China Summary: This standard specifies the polyester staple fiber (including hollow fiber) and polyester filament flame retardancy test methods oxygen index. This standard applies to polyester staple fibers (including hollow fiber) and polyester filament flame retardant properties of oxygen index determination. This standard only under laboratory conditions for the determination of burning behavior of materials, quality control, and not as a measure of actual use conditions, the basis for the risk of fire or only certain special purpose material for analysis when the fire of all the factors. This standard does not apply to high shrinkage rate was assessed after heating of the material. FZ/T 50017-2011: Testing method for flame retardant property of polyester fibers. Oxygen index---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.Testing method for flame retardant property of polyester fibers. Oxygen index ICS 59.060.20 W50 People's Republic of China textile industry standards Test method for flame retardant polyester fiber Oxygen index Oxygenindex Issued on. 2011-05-18 2011-08-01 implementation Ministry of Industry and Information Technology of the People's Republic of China released ForewordThis standard was drafted in accordance with GB/T 1.1-2009 given rules. The standard proposed by China Textile Industry Association. This standard by the Shanghai textile industry technical supervision of the centralized. This standard was drafted. China Sinopec Yizheng Chemical Fiber Co., Ltd., Taicang Jinhui Chemical Fiber Industry Co., Ltd., Shanghai Textile Workers Technical supervision of the industry, China Sinopec Shanghai Petrochemical Company Limited polyester division. The main drafters of this standard. the Army, Chen Huahui, Tan Hui, Zhou Zhen De, Li Ju, especially Qi, Xu Feng Ye. Test method for flame retardant polyester fiber Oxygen index1 ScopeThis standard specifies the polyester staple fiber (including hollow fiber) and polyester filament --- Test method for flame retardancy oxygen index. This standard applies to polyester staple fiber (including hollow fiber) and polyester filament yarn measuring oxygen index. This standard is only used to determine the burning behavior of materials under laboratory conditions, product quality control, and not as a measure of actual conditions of use Under fire risk basis, one or all of the factors when a special-purpose material can only fire for analysis. This standard does not apply to assessment When heated, the material was high shrinkage.2 Normative referencesThe following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document. GB/T 3291.1 textile material properties and test - Part 1. fibers and yarns GB/T 3291.3 textile material properties and test - Part 3. General GB/T 3863 industrial oxygen GB/T 3864 industrial nitrogen GB/T 6502 sampling method of chemical fiber filament GB/T 14334 chemical fiber staple sampling method3 Terms and DefinitionsGB/T 3291.1, GB/T 3291.3 and define the following terms and definitions apply to this document. 3.1 Oxygen Index (OI) oxygenindex Under test conditions, which leads to (23 ± 2) ℃ of oxygen, nitrogen mixed gas, just to maintain the minimum oxygen concentration in the combustion of fibrous material, Expressed in volume fraction. Principle 4 Transparent combustion cylinder of oxygen in a sample is fixed vertically upward flow of nitrogen gas mixture, the ignition top specimen, and the specimen was observed burning Combustion characteristics, combustion of the sample length is compared with a given criterion, by different oxygen concentrations in a series of tests to estimate the minimum oxygen concentration. Test specimens of 40% to 60% have more than a predetermined length of the combustion. 5. Apparatus 5.1 Oxygen Index 5.1.1 Oxygen Index Oxygen Index shown in Figure 1. The same effect of the instrument can also be used. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of FZ/T 50017-2011_English be delivered?Answer: Upon your order, we will start to translate FZ/T 50017-2011_English as soon as possible, and keep you informed of the progress. The lead time is typically in 9 seconds (download/delivered in 9 seconds). The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of FZ/T 50017-2011_English with my colleagues?Answer: Yes. The purchased PDF of FZ/T 50017-2011_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |