FZ/T 50001-2016 English PDF

US$299.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
FZ/T 50001-2016: Test method for interlacing degree of synthetic filament yarns
Status: Valid

FZ/T 50001: Historical versions

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
FZ/T 50001-2016	299	Add to Cart	3 days	Test method for interlacing degree of synthetic filament yarns	Valid
FZ/T 50001-2005	559	Add to Cart	3 days	Testing method for interlacing degree of synthetic filament yarns	Obsolete
FZ/T 50001-1991	319	Add to Cart	3 days	Synthetic Fibre Network Wire Network Test Method	Obsolete

Similar standards

GB/T 43015   GB/T 39026   FZ/T 50010.13   FZ/T 50010.5   FZ/T 50010.3   

Basic data

Standard ID: FZ/T 50001-2016 (FZ/T50001-2016)
Description (Translated English): Test method for interlacing degree of synthetic filament yarns
Sector / Industry: Spinning & Textile Industry Standard (Recommended)
Classification of Chinese Standard: W50
Classification of International Standard: 59.060
Word Count Estimation: 13,154
Date of Issue: 2016-04-05
Date of Implementation: 2016-09-01
Older Standard (superseded by this standard): FZ/T 50001-2005
Quoted Standard: GB/T 4146.1; GB/T 4146.3; GB/T 6502; GB/T 8170; GB/T 14343
Regulation (derived from): The Ministry of Industry and Notice No. 2016 in 2016; industry standard filing notice 2016 No. 8 (total No. 200)
Issuing agency(ies): Ministry of Industry and Information Technology of the People's Republic of China

FZ/T 50001-2016: Test method for interlacing degree of synthetic filament yarns

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Test method for interlacing degree of synthetic filament yarns ICS 59.060.20 W50 People 's Republic of China textile industry standards Replacing FZ/T 50001-2005 Test method for networkedness of synthetic filament filaments 2016-04-05 release 2016-09-01 implementation Issued by the Ministry of Industry and Information Technology of the People 's Republic of China

Foreword

This standard is drafted in accordance with the rules given in GB/T 1.1-2009. This standard replaces FZ/T 50001-2005 "Synthetic fiber filament network test method". The main changes in this standard compared with FZ/T 50001-2005 are as follows. --- modified the standard range (see Chapter 1,.2005, Chapter 1); --- test temperature and humidity conditions to laboratory temperature and humidity (see 4.2.1,.2005 version 4.2.1); - the number of trials to modify the sample of the part (see 4.2.6.1,.2005 4.4); - Increased coefficient of variation between packages and calculation of coefficient of variation in individual packages (6.2); - Removed Appendix A rapid humidity control method (see Appendix A of.2005); - Appendix B to Appendix A (see Appendix A, Appendix B, Appendix B); - Appendix C is replaced by Appendix B and the name and content are modified (see Appendix B, Appendix C,.2005); --- Appendix D is changed to 5.4 (see Appendix D for 5.4 and.2005); - Added photoelectric counting method (see Appendix C). This standard is proposed by China Textile Industry Federation. This standard is under the jurisdiction of Shanghai Textile Industry Technical Supervision. The drafting of this standard. Jiangsu Shenghong Technology Co., Ltd., Shanghai Textile Industry Technical Supervision, Tong Kun Group Zhejiang Hengtong Fiber Co., Ltd., Rongsheng Petrochemical Co., Ltd., Haiyan Haili Environmental Fiber Co., Ltd., China Chemical Fiber Industry Association. The main drafters of this standard. Yao Ada, Tian Hui Shuang, Zhou Zhende, Shen Jianlun, Zhou Xianhe, Chen Hao, Li Deli. This standard replaced the previous version of the standard release. - FZ/T 50001-1991, FZ/T 50001-2005. Test method for networkedness of synthetic filament filaments

1 Scope

This method specifies four kinds of test methods for the fiber network of synthetic filament --- Method A. Hand-moving needle method; Method B. Manual heavy hammer method; Method C. instrument shift needle method; method D. water bath needle removal method. Method A and Method B are used when the test results are disputed. This standard applies to synthetic filaments.

2 normative reference documents

The following documents are indispensable for the application of this document. For dated references, only the dated edition applies to this article Pieces. For undated references, the latest edition (including all modifications) applies to this document. Textiles - Chemical fibers - Part 1. Generic names GB/T Textiles - Chemical fibers - Part 3. Test terminology GB/T GB/T 6502 Chemical fiber filament sampling method Representation and Judgment of Numerical Correction Rule and Limit Value of GB/T 8170 Test method for linear density of chemical fiber filament GB/T 14343

3 terms and definitions

The following definitions and definitions as defined in GB/T 4146.1 and GB/T 4146.3 apply to this document. 3.1 Network degree ofinterlacing The number of undivided network nodes with a certain fastness after the load per meter. 3.2 The extricationload of extrication Plus a certain load on the wire, to meet the network requirements of the minimum load value.

4 test general rules

4.1 Sampling - parts of the laboratory samples taken out on demand; - Laboratory samples in batch samples are specified in accordance with GB/T 6502. Do not pick up packages that are already exposed to contamination, contamination, abrasions or packaging that have been opened during transport. 4.2 Test conditions 4.2.1 Test temperature and humidity conditions In the laboratory temperature and humidity conditions. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of FZ/T 50001-2016_English be delivered?

Answer: Upon your order, we will start to translate FZ/T 50001-2016_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of FZ/T 50001-2016_English with my colleagues?

Answer: Yes. The purchased PDF of FZ/T 50001-2016_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version FZ/T 50001-2016?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version FZ/T 50001-2016 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.