FZ/T 33010-2010 English PDFUS$149.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. FZ/T 33010-2010: Ramie belt used in cigarette machine Status: Valid FZ/T 33010: Historical versions
Basic dataStandard ID: FZ/T 33010-2010 (FZ/T33010-2010)Description (Translated English): Ramie belt used in cigarette machine Sector / Industry: Spinning & Textile Industry Standard (Recommended) Classification of Chinese Standard: W59 Classification of International Standard: 59.080.99 Word Count Estimation: 6,697 Date of Issue: 2010-08-16 Date of Implementation: 2010-12-01 Older Standard (superseded by this standard): FZ/T 33010-1999 Quoted Standard: GB/T 3820; GB/T 4668; GB/T 8170; FZ/T 60021-1996 Regulation (derived from): Engineering (2010) No. 115 Issuing agency(ies): Ministry of Industry and Information Technology of the People's Republic of China Summary: This standard specifies the requirements with cigarette ramie, test methods, inspection rules, packaging, labeling, transportation and storage. This standard applies to the quality of identification with ramie cigarette. FZ/T 33010-2010: Ramie belt used in cigarette machine---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.Ramie belt used in cigarette machine ICS 59.080.99 W59 People's Republic of China textile industry standards Replacing FZ/T 33010-1999 Ramie with cigarette Issued on. 2010-08-16 2010-12-01 implementation Ministry of Industry and Information Technology of the People's Republic of China released ForewordInstead of the standard FZ/T 33010-1999 "Ramie cigarette band." Compared with the standard FZ/T 33010-1999 The main changes are as follows. --- According to GB/T 1.1-2000. provisions "Standardization Guide Part 1 standard structure and rules are written" in the preparation; --- Delete a range of ramie fiber containing > 50% and above ", with a corresponding expansion of the scope of the standard; --- Cancellation of the product varieties and specifications; --- Original appearance quality in Tables 2 and 3 are combined into one table (Table 2), simplify the standard; --- The density index is adjusted to only the assessment weft density; --- According to the actual needs of the elongation at break indicators slightly adjusted; --- Appearance quality part with surface defects such as warp, weft dilute, oil stains and weft (warp) shrink adjusted and supplemented. The standard proposed by China Textile Industry Association. This standard by the National Standardization Technical Committee Textile flax (flax) Textile Technical Committee (SAC/TC209/SC4) centralized. This standard by the Hunan Provincial Textile Products Quality Supervision and Testing Center is responsible for drafting. The main drafters of this standard. Peng Aikui, Wan Hongling, Friends of Liang, Jiang Min. This standard replaces the standards previously issued as follows. --- FZ/T 33010-1999. Ramie with cigarette1 ScopeThis standard specifies requirements for cigarette with ramie, test methods, inspection rules, packaging, labeling, transportation and storage. This standard applies to identify ramie cigarette with quality.2 Normative referencesThe following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard. Determination of GB/T 3820 thickness of textiles and textile products Determination of GB/T 4668 woven fabric density GB/T 8170 repair value expressed about the rules and limit values and judgment FZ/T 60021-1996 Ribbon product physical and mechanical performance test method3 Requirements3.1 ramie cigarette with requirements are divided into intrinsic quality and appearance quality, internal quality including breaking strength, elongation at break, weft density and thickness of the four , The appearance of quality including dimensional tolerances and with surface defects. 3.2 Review of cigarettes with ramie, etc., based on the inherent quality and appearance quality is divided into quality products and unqualified products, given the inherent quality of press criticism, the appearance of quality Article amount assessed, inherent quality and appearance of all those who meet the requirements for qualified products, more than any of the requirements are substandard Lattice products. 3.3 ramie cigarette with the intrinsic quality requirements in Table 1. Table 1 internal quality requirements Project permitted range Breaking strength/(N/cm) ≥ High-speed with 1050 Non-high-speed tape 700 Elongation at break /% ≤ With 7.0 high speed Non-high-speed tape 6.0 Thickness/mm ± 0.05 Weft density/(root/cm) ± 1.0 Note. Cigarettes speed is greater than 7000/min high-speed cigarette machine belt belt, less than 7000/min with a non-high-speed cigarette machine belt. 3.4 ramie cigarette with the appearance of quality requirements are shown in Table 2. Table 2 Appearance quality requirements No. Item allowable range1 dimensional tolerancesLength/mm ± 5 Width/mm ± 0.5 ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of FZ/T 33010-2010_English be delivered?Answer: Upon your order, we will start to translate FZ/T 33010-2010_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of FZ/T 33010-2010_English with my colleagues?Answer: Yes. The purchased PDF of FZ/T 33010-2010_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version FZ/T 33010-2010?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version FZ/T 33010-2010 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
