FZ/T 20032-2017 English PDF

US$119.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
FZ/T 20032-2017: Test method for neck opening stretchability of wool knitted goods
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
FZ/T 20032-2017	119	Add to Cart	3 days	Test method for neck opening stretchability of wool knitted goods	Valid

Similar standards

FZ/T 70009   FZ/T 20018   FZ/T 20031   FZ/T 20029   FZ/T 20028   

Basic data

Standard ID: FZ/T 20032-2017 (FZ/T20032-2017)
Description (Translated English): Test method for neck opening stretchability of wool knitted goods
Sector / Industry: Spinning & Textile Industry Standard (Recommended)
Classification of Chinese Standard: W20
Classification of International Standard: 59.080.01
Word Count Estimation: 5,528
Date of Issue: 2017-11-07
Date of Implementation: 2018-04-01
Quoted Standard: GB/T 6529; GB/T 8170
Regulation (derived from): Ministry of Industry and Information Technology Bulletin 2017 No. 48
Issuing agency(ies): Ministry of Industry and Information Technology of the People's Republic of China
Summary: This standard specifies the test method for determining the pull-out dimensions of the collar of a wool knit jacket using the constant load method. This standard applies to woolen knit tops such as collar round necks or collars and similar collars. Other types of products can refer to the implementation.

FZ/T 20032-2017: Test method for neck opening stretchability of wool knitted goods

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
(Wool knit collar pull test method) ICS 59.080.01 W20 People's Republic of China Textile Industry Standard Knitwear collar pull test method Published on.2017-11-07 Implementation of.2018-04-01 The Ministry of Industry and Information Technology of the People's Republic of China released

Foreword

This standard was drafted in accordance with the rules given in GB/T 1.1-2009. This standard is proposed by the China Textile Industry Federation. This standard is under the jurisdiction of the National Textile Standardization Technical Committee Wool Textile Branch (SAC/TC209/SC3). This standard was drafted by. Tianxiang (Tianjin) Quality Technical Service Co., Ltd., Beijing Wool Textile Research Institute Inspection Center, Zhejiang Province Sweater Quality Testing Center. The main drafters of this standard are. Ding Yifeng, Zhao Zhihua, Yan Wen, Mao Minghua, Gong Yue, and Kabin. Knitwear collar pull test method

1 Scope

This standard specifies the test method for determining the pull-out dimensions of the collar of a wool knit jacket using the constant load method. This standard applies to woolen knit tops such as collar round necks or collars and similar collars. Other types of products can refer to the implementation.

2 Normative references

The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article Pieces. For undated references, the latest version (including all amendments) applies to this document. GB/T 6529 Standard Atmosphere for Humidification and Testing of Textiles GB/T 8170 Representation and Determination of Numerical Rounding Rules and Limit Values

3 Principle

Put the collar on the gripper and pull the inner collar to the specified load at a constant rate. The distance between the two ends of the collar is the collar's opening dimension.

4 Equipment and Tools

4.1 Using a CRE type tensile tester or other device meeting the test requirements, the instrument shall have the following general characteristics. a) With the indication or record the tensile value when the specified load is reached, the indication error does not exceed ± 1mm; b) The instrument should be able to set the tensile speed of 300mm/min with an accuracy of ±2%; c) Holder. two parallel cylindrical metal rods, metal rod diameter (10 ± 2) mm, length (50 ± 10) mm, two metal rods A similar device that can be adjusted from 100mm to 450mm, or equivalent, is shown in Figure 1. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of FZ/T 20032-2017_English be delivered?

Answer: Upon your order, we will start to translate FZ/T 20032-2017_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of FZ/T 20032-2017_English with my colleagues?

Answer: Yes. The purchased PDF of FZ/T 20032-2017_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.