FZ/T 20014-2010 English PDF

US$149.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
FZ/T 20014-2010: Method for determination of dimensional change of wool fabrics induced by ironing
Status: Valid

FZ/T 20014: Historical versions

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
FZ/T 20014-2010	149	Add to Cart	3 days	Method for determination of dimensional change of wool fabrics induced by ironing	Valid
FZ/T 20014-1997	319	Add to Cart	3 days	Test method of ironing shrinkage for wool fabric	Obsolete

Similar standards

FZ/T 70009   FZ/T 20018   FZ/T 20015.8   FZ/T 20015.7   FZ/T 20008   

Basic data

Standard ID: FZ/T 20014-2010 (FZ/T20014-2010)
Description (Translated English): Method for determination of dimensional change of wool fabrics induced by ironing
Sector / Industry: Spinning & Textile Industry Standard (Recommended)
Classification of Chinese Standard: W20
Classification of International Standard: 59.080.01
Word Count Estimation: 6,674
Date of Issue: 2010-08-16
Date of Implementation: 2010-12-01
Older Standard (superseded by this standard): FZ/T 20014-1997
Quoted Standard: GB/T 6529; GB/T 8170
Regulation (derived from): Engineering (2010) No. 115
Issuing agency(ies): Ministry of Industry and Information Technology of the People's Republic of China
Summary: This standard specifies the determination of wool fabric is treated with dry heat after ironing dimensional change test methods. This standard applies to 30% or more synthetic fibers blended with wool or synthetic fibers made ??of pure wool fabrics.

FZ/T 20014-2010: Method for determination of dimensional change of wool fabrics induced by ironing

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Method for determination of dimensional change of wool fabrics induced by ironing ICS 59.080.01 W20 People's Republic of China textile industry standards Replacing FZ/T 20014-1997 Wool ironing dry heat dimensional change test method Issued on. 2010-08-16 2010-12-01 implementation Ministry of Industry and Information Technology of the People's Republic of China released

Foreword

This standard was drafted in accordance with GB/T 1.1-2009 given rules. Instead of the standard FZ/T 20014-1997 "dry heat ironing wool fabric shrinkage test methods," This standard FZ/T 20014-1997 phase Ratio, in addition to editorial changes outside the main technical changes are as follows. --- Changing the name of the standard; --- Update the normative references (see Chapter 2); --- Revised standard atmospheric testing requirements (see 51, 1997 version 5.1.); --- Increasing the clipping sample requirements (see 6.1); --- Modify the formula warp and weft of dimensional change (see Chapter 8, Chapter 8, 1997 edition); --- Increasing the sample test results are calculated (see Chapter 9). The standard proposed by China Textile Industry Association. This standard by the National Standardization Technical Committee Textile Wool Textile Technical Committee (SAC/TC209/SC3) centralized. This standard was drafted. Shanghai Textile Science and Technology Institute of wool and linen. The main drafters of this standard. Zhu also into, Ge Huiping. This standard replaces the standards previously issued as follows. --- FZ/T 20014-1997. Wool ironing dry heat dimensional change test method

1 Scope

This standard specifies the test method for determination of wool fabric after ironing by dry heat varying dimensions. This standard applies to more than 30% synthetic fibers and wool blend or pure wool fabrics and synthetic fibers.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document. GB/T 6529 Textiles Standard conditioning and testing atmosphere GB/T 8170 repair value expressed about the rules and limit values and judgment Principle 3 The specimen predetermined size, after a predetermined condition ironing, pressing the hot dimensional change before and after sizing warp and weft and area change Rate.

4 instruments and tools

4.1 pressure of 1.5kPa ± 0.2kPa same test conditions of iron or other means. Minimum scale of 4.2 millimeter ruler straight. Thermometer 4.3 200 ℃ for. Asbestos slotted intermediate 4.4 may be buried in the middle of the thermometer. 4.5 double prime wool blanket, about the size of 200mm × 200mm. 4.6 mark with a needle, thread. 4.7 Stopwatch.

5 standard atmosphere

5.1 Test standard atmosphere. Test according to GB/T 6529 standard atmosphere, ie, temperature (20 ± 2) ℃, relative humidity (65 ± 4)%. 5.2 The specimen shall be tested in both wet and reduced test standard atmosphere.

6 Sample

6.1 Samples should be away from the big match ends 5m or more parts (or 5m above the opening match at) clipping. 6.2 full-size sample of not less than 20cm. 6.3 parts of 10cm away from the fabric selvage and cut different than a random sample consisting of warp and weft, shall not affect the test results on samples Defects. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of FZ/T 20014-2010_English be delivered?

Answer: Upon your order, we will start to translate FZ/T 20014-2010_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of FZ/T 20014-2010_English with my colleagues?

Answer: Yes. The purchased PDF of FZ/T 20014-2010_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version FZ/T 20014-2010?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version FZ/T 20014-2010 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.