FZ/T 20008-2015 English PDFUS$99.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. FZ/T 20008-2015: Test for the mass per unit area of wool fabric Status: Valid FZ/T 20008: Historical versions
Basic dataStandard ID: FZ/T 20008-2015 (FZ/T20008-2015)Description (Translated English): Test for the mass per unit area of wool fabric Sector / Industry: Spinning & Textile Industry Standard (Recommended) Classification of Chinese Standard: W20 Classification of International Standard: 59.080.01 Word Count Estimation: 4,481 Date of Issue: 2015-07-14 Date of Implementation: 2016-01-01 Older Standard (superseded by this standard): FZ/T 20008-2006 Quoted Standard: GB/T 6529; GB/T 8170; GB 9994; GB/T 9995-1997 Regulation (derived from): PRC MIIT Announcement (2015 No.49) Issuing agency(ies): Ministry of Industry and Information Technology of the People's Republic of China Summary: This Standard specifies the test method for the determination of wool fabric mass per unit area in the moisture regain. This Standard applies to all types of wool fabric. FZ/T 20008-2015: Test for the mass per unit area of wool fabric---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.(Determination of mass per unit area of wool fabric) ICS 59.080.01 W20 People's Republic of China textile industry standards Replacing FZ/T 20008-2006 Determination of wool fabric mass per unit area Issued on. 2015-07-14 2016-01-01 implementation Ministry of Industry and Information Technology of the People's Republic of China released ForewordThis standard was drafted in accordance with GB/T 1.1-2009 given rules. Instead of the standard FZ/T 20008-2006 "wool fabrics Determination of mass per unit area," compared with FZ/T 20008-2006 main technical Surgery changes are as follows. --- Canceled 5.1 ruler length specifications; --- Original standard 7.1 to now 7.1 and 7.2, that is, the sample square and circular sample calculation formula shown separately. The standard proposed by China Textile Industry Association. This standard by the National Standardization Technical Committee Textile Wool Textile Technical Committee (SAC/TC209/SC3) centralized. This standard was drafted. Shanghai Institute of wool and linen textile science and technology, product quality inspection Jiaxing hospital. The main drafters of this standard. Zhu Jie, Wei Xiaoying, Fu Wei. This standard replaces the standards previously issued as follows. --- FZ/T 20008-1993, FZ/T 20008-2006. Determination of wool fabric mass per unit area1 ScopeThis standard specifies the test method for the determination of wool fabric mass per unit area in the moisture regain. This standard applies to all types of wool fabric.2 Normative referencesThe following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document. GB/T 6529 Textiles conditioning and testing using standard atmosphere (GB/T 6529-2008, ISO 139.2005, MOD) GB/T 8170 repair value expressed about the rules and limit values and judgment GB 9994 the moisture regain of textile materials GB/T 9995-1997 Textile material moisture content and moisture determination oven drying method Principle 3 A predetermined sample size, weighed after drying to constant weight in an oven, and then combined with moisture regain calculated mass per unit area of the fabric.4 Standard conditioning and testing atmosphereAir conditioning and testing using standard air GB/T 6529 regulations.5 equipment and instruments5.1 ruler, minimum scale value 1mm. 5.2 scissors. 5.3 Balances, precision 0.001g. 5.4 thermostatic oven, weighing container, dryers, etc., shall comply with the provisions of the 5709-1997 GB/T 5.1 ~ 5.3 in. 5.5 area of 100cm2 circular sample cutter.6 Test Procedure6.1 specimen flat on the table, the standard atmospheric humidity-placed at least 24h. 6.2 never fold a sample from the selvage 5cm or more parts, and cut two representative samples, each about 20cm × 20cm; or with a round Shaped specimen cutter clipping a representative sample of three. When as a result of a fabric flower organization affect the local area of the fabric quality, containing the sample to be taken flower Integer complete organization. 6.3 Remove the square edge of the specimen samples need bulk yarn, trim. 6.4 square specimen measured at the center of the sample and on both sides of the actual length and width of each three times accurate to 0.1cm, and calculate the average length of the sample, the test ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of FZ/T 20008-2015_English be delivered?Answer: Upon your order, we will start to translate FZ/T 20008-2015_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of FZ/T 20008-2015_English with my colleagues?Answer: Yes. The purchased PDF of FZ/T 20008-2015_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version FZ/T 20008-2015?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version FZ/T 20008-2015 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |