FZ/T 13029-2024 English PDFUS$209.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. FZ/T 13029-2024: (Cotton bamboo knot natural color fabric) Status: Valid FZ/T 13029: Historical versions
Basic dataStandard ID: FZ/T 13029-2024 (FZ/T13029-2024)Description (Translated English): (Cotton bamboo knot natural color fabric) Sector / Industry: Spinning & Textile Industry Standard (Recommended) Classification of Chinese Standard: W13 Classification of International Standard: 59.080.30 Word Count Estimation: 9,936 Date of Issue: 2024-07-05 Date of Implementation: 2026-07-01 Older Standard (superseded by this standard): FZ/T 13029-2014 Issuing agency(ies): Ministry of Industry and Information Technology of the People's Republic of China Summary: This standard specifies the terms and definitions, classification and marking, requirements, test and inspection methods, inspection rules, marking, packaging, transportation and storage of cotton slub natural color fabrics. FZ/T 13029-2014: Cotton slub grey fabric---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.Cotton slub grey fabric ICS 59.080.30 W13 People's Republic of China textile industry standards Bamboo cotton gray fabric Issued on. 2014-05-06 2014-10-01 implementation Ministry of Industry and Information Technology of the People's Republic of China released ForewordThis standard was drafted in accordance with GB/T 1.1-2009 given rules. The standard proposed by China Textile Industry Association. This standard by the National Technical Committee of Standardization Technical Committee printing and dyeing cotton textiles (SAC/TC209/SC2) centralized. This standard was drafted. Jiangsu Health Group Limited, Jihua three thousand five hundred and nine Textile Co., Ltd., Changzhou Wing Lap Sunny weaving factory, Shanghai Textile Industrial Technology Authority, China Textile Industry Association. The main drafters of this standard. Chen Hui, Xu Hong, Tan Hui, Miao Fuping, Zhang Baoqing, Ye Jian Chun. Bamboo cotton gray fabric1 ScopeThis standard specifies the terms and definitions bamboo cotton gray fabric, classification, requirements, cloth defect score, test methods, inspection rules, marking Chi, packaging, transport and storage. This standard applies to the production of quality accreditation woven cotton cloth bamboo qualities. This standard does not apply to special purpose jacquard fabrics and fabrics.2 Normative referencesThe following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document. GB/T 406-2008 qualities of cotton cloth GB/T 3923.1 Textiles Tensile properties of fabrics - Part 1. breaking force and elongation Strip method Determination of GB/T 4666 Textiles length and width of Determination of GB/T 4668 woven fabric density GB/T 8170 repair value expressed about the rules and limit values and judgment FZ/T 10004 cotton and chemical fiber spinning pure, blended gray fabric inspection rules FZ/T 10006 cotton and chemical fiber spinning pure, blended qualities Bumian junction impurity lattice defect rate test FZ/T 10009 cotton and chemical fiber spinning pure, blended gray fabric marking and packaging3 Terms and DefinitionsThe following terms and definitions apply to this document. 3.1 Slub slubyarn In a certain length, diameter thickness, length of bamboo or bamboo spacing regular or irregular changes in yarn. 3.2 Jingwei to simultaneously or separately, or in proportion to the use of yarn, woven fabrics made of. Category 4 Bamboo cotton gray fabric of product variety, size classification, based on user needs, in accordance with Appendix A to develop.5 Requirements5.1 Project Cotton slub fabric qualities inherent quality and appearance requirements are divided into two aspects of quality, including the intrinsic quality of the weave, the width deviation, density Error rate, error rate of breaking strength, Nep impurity defects frame rate, frame rate six Nep defects, the appearance of the quality of a fabric defect. 5.2 grading regulations 5.2.1 qualities of cotton fabric products such as bamboo divided into superior products, first-class product and the second product, lower than the second product is substandard products. Comment 5.2.2 slub cotton gray fabric, etc. to match the units of the weave, width deviation rate, fabric defects by horses ratings, density deviation rate, fracture Strong deviation rate, Nep impurity defects frame rate, frame rate Nep defects press criticism, to which one of the lowest products such as the piece of cloth goods. Note. usually every piece of cloth to 40m dollars. 5.2.3 qualities of bamboo cotton cloth grading provisions are shown in Table 1, Table 2 and Table 3. Table 1 Internal Quality grading regulations Item Standard Superior grade First grade second product Weave design requirements according to the design requirements meet the design requirements meet the design requirements Width deviation ratio a /% by product specification 1.5 -1.0 -1.2 -1.0 -1.5 ~ 2.0 ~ Density deviation ratio a /% according to product specifications Warp density ≥-1.2 ≥-1.5 < -1.5 Weft density ≥-1.0 ≥-1.0 < -1.0 Breaking strength deviation rate /% Press the breaking strength The formula By ≥-8.0 to ≥-6.0 < -8.0 Zonal ≥-6.0 ≥-8.0 < -8.0 Note. The warp and weft density should ensure compliance with the package after a specified in the table. When the width of a deviation rate exceeds 1.0%, the rate of deviation allowed to be close to 2.0%. Table 2 Nep impurity defects frame rate, frame rate specified defects neps Fabric classification The total fabric tightness Nep impurity defects frame rate Nep lattice defect rate Excellence in goods First grade Excellence in goods First grade Combed fabric 70 or less ≤14 ≤16 ≤3 ≤8 70 to 85 the following ≤15 ≤18 ≤4 ≤10 85 to 95 the following ≤16 ≤20 ≤4 ≤11 95 and above ≤18 ≤22 ≤6 ≤12 Semi-combed fabric - ≤24 ≤30 ≤6 ≤15 Fine fabric 65 The following ≤22 ≤30 ≤6 ≤15 65 to 75 the following ≤25 ≤35 ≤6 ≤18 75 and above ≤28 ≤38 ≤7 ≤20 Crude fabric 70 or less ≤28 ≤38 ≤7 ≤20 70 to 80 or less ≤30 ≤42 ≤8 ≤21 80 and above ≤32 ≤45 ≤9 ≤23 TABLE 2 (cont.) Fabric classification The total fabric tightness Nep impurity defects frame rate Nep lattice defect rate Excellence in goods First grade Excellence in goods First grade Non-combed Fabric Crude fabric 70 or less ≤32 ≤45 ≤9 ≤23 70 to 80 the following ≤36 ≤50 ≤10 ≤25 80 and above ≤40 ≤52 ≤10 ≤27 Note 1. Nep impurity defects frame rate, frame rate exceeds Nep defects down to the second so far in Table 2. Note 2. The bamboo cotton gray fabric by the weft yarn average density classification. --- Ultrafine fabrics. 10tex less (60s and above); --- Fine fabric. 10tex ~ 20tex (60s ~ 29s); --- Crude fabric. 21tex ~ 29tex (28s ~ 20s); --- Crude fabric. 32tex and older (18s and below). Table 3 ratings fabric defect classification limits prescribed in minutes per square meter Superior grade First grade second product 0.2 0.3 0.6 5.2.4 Oil defects reviews and other regulations. a cloth all defect rates adduct cumulative total score exceeds the allowable drop and other goods, within 1m serious defects Comment 4 drop into other goods, difficult to repair tissue does not allow assessment of 4 points over three defects per hundred meters. Each piece of cloth to allow the total score according to formula (1) meter Count, according to GB/T 8170 rounded to an integer. A = a × L × W (1) Where. A --- horses allowed per total score, in minutes; a --- per square meter allow Rating, in minutes per square meter (min/m2); L --- piece length in meters (m); W --- Width in meters (m). 5.2.5 a packet length bamboo cotton gray fabric after the implementation agreement by the two sides.6 cloth defect score6.1 fabric defect inspection 6.1.1 test, the fabric surface illumination is 400lx ± 100lx. 6.1.2 cloth defect score to prevail front cloth, plain weave fabric and Yamagata twill printed to shift the positive side, twill fabric yarns The fabric left oblique (↖) is a front line in the fabric right oblique (↗) is a front, customers can also request confirmation side of the fabric. 6.1.3 test should be flat on the table cloth, standing in front of the table inspectors, to be able to clearly see the obvious defects. 6.2 Oil predetermined defect rates Fabric defect rates specified in Table 4. Table 4 cloth defect score regulations Defect classification Rating By 8cm and less obvious defects to 8cm above ~ 16cm 16cm ~ 24cm 24cm or more than ~ 100cm Zonal obvious defects 8cm above and below 8cm ~ 16cm 16cm ~ 24cm 24cm or more above Rungs - - demi demi above and below Serious defects The number of rates - - 3 4 and above Length Rating - - 1cm and less than 1cm Note 1. Oil defect details, see Appendix B, Defect Name Appendix C. Note 2. When the number of serious defects and contradictions length score, strict ratings. Note 3. Does not affect the quality of after-rung defect rates, the agreement by both parties. 6.3 1m cumulative score 1m cumulative score up to four points commentary. 6.4 meter fabric defects 6.4.1 defect length to the maximum length of the warp or weft meter. 6.4.2 warp obvious defects and serious defects, the length of more than 1m, the excess part of the re-rating in Table 4. 6.4.3 intermittent defects occur in one internal, the warp (weft) into the two 8cm and above, press the continuous length score. 6.4.4 Total broken or tied (including positive and negative) that includes one or two good yarn, every three or more and of a good yarn, does not make a total break or tie (twill, Satin fabric at intervals within a complete organization and for total break or parallel processing). 6.5 Description of defect rates 6.5.1 defect rates and provisions start 6.5.1.1 There are two defects were mixed together with a serious score. 6.5.1.2 Edge distance and tissue defects (including organizational side) edge 1cm within not score, but the edges, drag yarn, cat ears, a concave side, bad side, edge exclusion, deep Oil and rust defect assessment 4 points of the hole, jump flower to score, such as defects extending from the outside edge of 1cm should adduct score, shuttleless weaving side boob, twisted Edge feathering extends a predetermined length of 0.3cm ~ 0.8cm. Edge organizations have special requirements for press requirements score. 6.5.1.3 Oil tow yarn length 1cm above 2 points each comment, drag selvage yarn length of more than 2cm each comment 1 point (one for one into a meter). 6.5.1.4 0.3cm debris following each comment 1 minute, 0.3cm above and metal debris and debris (including porcelain) 4 stars Comments (coarse measurement debris degree). 6.5.1.5 bamboo design does not meet the requirements of the fabric sample testing direct reduced substandard goods. 6.5.2 Processing billet defect ratings 6.5.2.1 water damage, stains, does not affect the organization of pulp spot rates. 6.5.2.2 bleaching blank in the reed, reed Chuancuo, Middle Road, demolition marks, cloud weaving halved score. 6.5.2.3 Printing hop star billet, dense road evenness, double by halving rates, the reed, reed Chuancuo, long shadow, light oil defects, a single double-wai, cloud Knitting, needle minor roads, foggy yarn, flower after flower weft not score. 6.5.2.4 variegated billet not wash oil light oil and oil slick yarn defect does not score. 6.5.2.5 dark blank defect oil, oil slick yarn, yarn soot, wash does not fade the color defect does not score. 6.5.2.6 Processing blank cloth 5cm from the defect within not score (but six defects should be cut open). 6.5.3 provisions for defect treatment 6.5.3.1 0.5cm above exclusion edge, 1cm above the hole and, bad side, get lean, not rolling shuttle docking, 2cm above the other six stitching defect Point, should be cut in the weaving factory. 6.5.3.2 woven metal debris, should weaving factory rejects. 6.5.3.3 Where after weaving factory can fix defects should be repaired factory. 6.5.4 fake open scissors and pieces of provisions to fight 6.5.4.1 fake cut open defects should be awarded 4 points or 3 points can not repair tissue defects, false cut after opening paragraphs of the cloth should be first-class products. 6.5.4.2 Where a consumer allow fake fight and cut open parts, cut open and can be implemented to fight fake member. Fake number was cut open, according to the second joint piece must not exceed Two, and more than triple horses are not allowed more than three. 6.5.4.3 fake cut open and the fight must not exceed 20% of the total members, including members fight must not exceed 10%. 6.5.4.4 should leave open cut cloth into separate packages, the package included a false start and cut section length record sheets, the word "fake open scissors" Outsourcing noted.7 Test methods7.1 Test conditions. the test shall be carried out under standard conditions for each method standards. Due to production needs, requiring rapid testing products Quality, rapid test method can be used, according to Appendix D to perform. 7.2 width, length measurement according to GB/T 4666 execution. 7.3 Determination of Density according to GB/T 4668 execution. 7.4 Determination of breaking strength according to GB/T 3923.1 execution. 7.5 Nep impurity defects frame rate, frame rate Nep defect inspection according to FZ/T 10006 execution.8 Inspection Rules8.1.1 Press FZ/T 10004 execution. 8.1.2 Test Method bamboo design. the fabric with customers to sample or design samples together contrast, it is determined whether the bamboo design Consistent. 9 signs, packaging, transportation and storage 9.1 logo and packaging Press FZ/T 10009 execution. 9.2 Transportation and storage Products during transport to avoid damaged packaging, product moisture. The product should be stored in dry, clean environment, to ensure product quality Mildew and other deterioration does not occur. Other 10 Users of products with special requirements, may be negotiated separately set protocol.Appendix A(Normative) Technical conditions make provision for A.1 develop bamboo cotton gray fabric of technical conditions, except for the following provisions, according to GB/T 406-2008 Appendix A to perform. Moisture regain A.2 cotton slub line is 8.5%. Metric linear density A.3 cotton slub yarn qualities according to formula (A.1) conversion, according to GB/T 8170 rounded to one decimal place. Tt = 590.5 Ne (A.1) Where. Tt --- cotton slub yarn qualities base yarn density in tex (tex); Ne --- cotton slub yarn qualities base yarn English count, unit support (s). A.4 cotton gray fabric bamboo fabric breaking strength to 5cm × 20cm breaking strength cloth, said fabric design breaking strength by the formula (A.2) calculated according to GB/T 8170 repair about integers. Q = p0 × N × K × Tt 2 × 100 (A.2) Where. Q --- bamboo cotton gray fabric design breaking strength, in Newtons (N); p0 --- single yarn Grade A base yarn breaking strength, in units of cN per tex (cN/tex); N --- fabric yarn standard density in the root of every ten centimeter (root/10cm); K --- fabric yarn strength utilization factor; Tt --- base fabric yarn density in tex (tex). NOTE. warp or weft yarn linear density using different specifications, according to the proportions of the different yarn number of cycles within the weighted average calculated by the average yarn breaking strength, flat Average yarn count. A.5 fabric yarn strength utilization factor K values in Table A.1. Table A.1 yarn strength utilization factor Weave Warp weft Tightness Tightness Plain cloth Special rough 37 to 55 35 to 50 0.86 to 0.95 0.86 to 1.01 In particular 37 to 55 35 to 50 0.81 to 0.90 0.83 to 0.98 Special fine 37 to 55 35 to 50 0.78 to 0.87 0.83 to 0.98 Yarn poplin In particular 62 to 70 33 to 45 0.85 to 0.93 0.86 to 0.98 Special fine 62 to 75 33 to 45 0.93 to 1.06 0.86 to 0.98 Serge twill The crude Laid ~ 75 0.86 ~ 55 1.06 ~ 60 0.80 ~ 40 1.00 And in particular more than 55 to 75 40 to 60 0.81 to 1.01 0.80 to 1.00 Gabardine, khaki The crude Laid ~ 90 1.07 ~ 80 1.17 ~ 60 0.80 ~ 40 1.00 And in particular 80 to 90 40 to 60 1.00 to 1.10 0.76 to 0.96 Satin yarn 65 to 80 45 to 55 0.88 to 1.03 0.73 to 0.83 Table A.1 (CONTINUED) Weave Warp weft Tightness Tightness Cross tribute 44 to 52 70 to 77 0.82 to 0.90 0.98 to 1.05 Note 1. The fabric tightness when given in the table tight range, K value is a sliding scale; fabric tightness less than the table given tight range, pro rata decrease. The fabric When the table is greater than the predetermined tightness tight range, calculated as shown in Table K maximum value. Note 2. Press the yarn thickness were divided into special thin, in particular, crude special third gear. Fine Special. 20tex (29s and above) and the following, in particular. 21tex ~ 32tex (28s ~ 18s), crude special. 32tex and older (18s and below). Note 3. The small jacquard satin weave given by the value of K, chaotic press twill weave Tissue K value.Appendix B(Normative) The specific content of various types of fabric defects B.1 warp obvious defects Bamboo, coarse warp, the wrong line density, fully Chuancuo, the reed, reed Chuancuo, through multi-strand, double warp, and the line cord, easing, tight end, by hanging, the ripple reduction, Breaking through, defect, Shen yarn, Star Jump, jump yarn, cotton, knot, side support defect, drag yarn, correcting bad, wrong fiber, grease, oil was, after rust, rust stains, do not fade Color by color, do not fade color stains, water damage, stains, spots pulp, cloth flowers, oil slick yarn, cat ears, a concave side, bad side, through the flower, long shadow, Aurora, needle Road, Mill Bad marks, selvage, square, wooden roller wrinkled, lotus leaf. B.2 zonal obvious defects Wrong latitude (including coarse, fine, tight, loose), evenness, de weft, double weft, weft shrinkage, flash, cloud weave, woven into the debris, flowers wai, wai oil, rust-wai, do not fade Color color weft, ash yarn, centipede, driving through reduction (India), a blank section, intensive bamboo. B.3 crosspiece Demolition marks, thin-wai, dense road. B.4 serious defects Hole, edge exclusion, stitching, get lean, the reduction wave pattern (three starting flute), tied three by hanging, easing (including spaced a good yarn ~ 2), Not butt rolling shuttle, 1cm above and bad side, metal debris woven into the adverse effects of tissue pulp spot, mildew, cloth trim bottom damage, warp Within 8cm whole full of 10 knots or defects temple, bamboo does not meet the design style. B.5 Other B.5.1 warp and weft defect defects, some defects are the two types of commonality in the category included only to obvious defects by a class, which These defects appear as at zonal, zonal press obvious defect rates. B.5.2 such as the above do not include defects in the fabric surface, a similar defect rates.Appendix C(Normative) Description defects names C.1 bamboo. slub yarn does not meet the design style of short segments. C.2 coarse warp. yarn count does not meet the design requirements, long 5cm diameter coarse warp yarns and over into the cloth. C.3 dislocation line density. linear density wrong process standards. C.4 Fully Chuancuo. No heald according to process requirements, resulting fabric tissue disorder. C.5 Reed Road. warp fabric strip presenting thin dense uneven. C.6 reed Chuancuo. No denting according to process requirements, resulting in uneven surface of the cloth warp arrangement. C.7 stranded by. two or more single yarns are plied. C.8 double warp. yarn (line) fabric tied with two warp yarns weaving. C.9 and line tightness. when the yarn twisting strands of tension unevenness. C.10 easing. part of the warp tension slack woven into the cloth. C.11 tight end. through the large part of the warp twist. C.12 hanging by. part of the warp in the fabric tension is too large. C.13 been reduced ripple. that part of the warp tension slack after the accident, the fabric surface is corrugated undulating. C.14 warp. warp break missing in the fabric. C.15 breaking defects. warp yarn breakage end woven into the cloth. C.16 Shen yarn. Fully due to poor lift, causing the warp yarns floating in cloth. C.17 star jump. a warp or weft skip 2 ~ 4 form a star-like point. C.18 yarn jump. 1 ~ 2 warp or weft skip 5 and above. C.19 cotton balls. fiber yarn on the sph......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of FZ/T 13029-2024_English be delivered?Answer: Upon your order, we will start to translate FZ/T 13029-2024_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of FZ/T 13029-2024_English with my colleagues?Answer: Yes. The purchased PDF of FZ/T 13029-2024_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version FZ/T 13029-2024?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version FZ/T 13029-2024 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
