FZ/T 13018-2014 English PDFUS$299.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. FZ/T 13018-2014: Lyocell grey fabric Status: Valid FZ/T 13018: Historical versions
Basic dataStandard ID: FZ/T 13018-2014 (FZ/T13018-2014)Description (Translated English): Lyocell grey fabric Sector / Industry: Spinning & Textile Industry Standard (Recommended) Classification of Chinese Standard: W13 Classification of International Standard: 59.080.30 Word Count Estimation: 13,154 Date of Issue: 10/14/2014 Date of Implementation: 4/1/2015 Older Standard (superseded by this standard): FZ/T 13018-2005 Quoted Standard: GB/T 3923.1; GB/T 4666; GB/T 4668; GB/T 8170; FZ/T 01101; FZ/T 10004; FZ/T 10006; FZ/T 10009; GB/T 406-2008; GB/T 2910.6 Regulation (derived from): People's Republic of China Ministry of Industry and Information Technology Notice 2014 No. 63; Industry Standard Filing Notice 2014 No. 12 (Overall No. 180) Issuing agency(ies): Ministry of Industry and Information Technology of the People's Republic of China Summary: This Standard specifies the qualities of lyocell fiber cloth product classification, requirements, fabric defect score, test methods, inspection rules and signs, packaging, transportation John and storage. This Standard applies to the production of lyocel FZ/T 13018-2014: Lyocell grey fabric---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.Lyocell grey fabric ICS 59.080.30 W13 People's Republic of China textile industry standards Replacing FZ/T 13018-2005 Lyocell fabric qualities Issued on. 2014-10-14 2015-04-01 implementation Ministry of Industry and Information Technology of the People's Republic of China released ForewordThis standard was drafted in accordance with GB/T 1.1-2009 given rules. This standard is the FZ/T 13018-2005 "lyocell fabric qualities" amendments mainly modify the following. --- Expanding the scope of the standard, the abolition of third-class products, and other products; --- Width, density, breaking strength is adjusted to the width deviation name, density deviation rate, breaking strength deviation rate, increase the fiber content of bias Poor, Nep impurity defects frame rate, frame rate Nep defect assessment; --- Cloth defect score by the total points/m to min/m2, width cancel classification; --- Rung regardless of clear and obvious defects; --- Original Appendices A, B adjusted to Appendix B, Appendix C; adjusted to the original Appendix C Appendix A, an increase of lyocell and cotton blend (Interleaved) content qualities of cloth; remove the original Appendix D. The standard proposed by China Textile Industry Association. This standard by the National Technical Committee of Standardization Technical Committee printing and dyeing cotton textiles (SAC/TC209/SC2) centralized. This standard was drafted. Jada Fujian Textile Co., Ltd., Qingdao Textiles Holding Company, the Shanghai textile industry technical supervision The, China Textile Industry Association. The main drafters of this standard. Ye prairie, hair Yang, Zhi-Qiang Qin, Zhang Baoqing, Ye Jian Chun. This standard replaces the standards previously issued as follows. --- FZ/T 13018-2005. Lyocell fabric qualities1 ScopeThis standard specifies the qualities of lyocell fiber cloth product classifications, requirements, cloth defect score, test methods, inspection rules and signs, Packaging, transportation and storage. This standard applies to the production of lyocell woven gray fabric (containing pure spinning, blended with cotton, interwoven). This standard does not apply to large jacquard, terry type fabrics and industrial gray fabric.2 Normative referencesThe following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document. GB/T 406-2008 qualities of cotton cloth GB/T 2910.6 Textiles - Quantitative chemical analysis - Part 6. viscose fiber, some copper ammonia fiber, modal fiber or LAISAI Er fiber and cotton mixture (formic acid/zinc chloride) GB/T 3923.1 Part 1 textile fabric tensile properties. breaking strength and elongation measurement (strip method) Determination of GB/T 4666 Textiles length and width of Determination of GB/T 4668 woven fabric density GB/T 8170 repair value expressed about the rules and limit values and judgment Determination FZ/T 01101 textile fiber content of physical law FZ/T 10004 cotton and chemical fiber spinning pure, blended gray fabric inspection rules FZ/T 10006 cotton and chemical fiber spinning pure, blended qualities Bumian junction impurity lattice defect rate test FZ/T 10009 cotton and chemical fiber spinning pure, blended gray fabric marking and packaging Category 3 Lyocell fabric qualities of product variety, size classification according to user needs, in accordance with Appendix A to develop.4 Requirements4.1 Project 4.1.1 lyocell fiber spinning pure gray fabric requirements are divided into intrinsic quality and appearance of the qualitative aspects, including the intrinsic quality of the weave, width Deviation, density deviation rate, error rate four breaking strength, the appearance of the quality of a fabric defect. 4.1.2 lyocell and cotton (interleaved) gray fabric requirements are divided into intrinsic quality and appearance of the qualitative aspects, including the intrinsic quality of the fabric Organizations, width deviation rate, deviation fiber content, density deviation rate, breaking strength deviation rate, frame rate Nep impurity defects, lattice defect rate seven neps , The appearance of the quality of a fabric defect. 4.2 grading regulations 4.2.1 qualities of lyocell fabric products divided into superior products, first-class product and the second product, lower than the second product is substandard products. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of FZ/T 13018-2014_English be delivered?Answer: Upon your order, we will start to translate FZ/T 13018-2014_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of FZ/T 13018-2014_English with my colleagues?Answer: Yes. The purchased PDF of FZ/T 13018-2014_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version FZ/T 13018-2014?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version FZ/T 13018-2014 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |