FZ/T 10003-2011 English PDF

US$239.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
FZ/T 10003-2011: Testing method for canvas
Status: Valid

FZ/T 10003: Historical versions

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
FZ/T 10003-2011	239	Add to Cart	3 days	Testing method for canvas	Valid
FZ/T 10003-1992	479	Add to Cart	4 days	Testing Method for Canvas	Obsolete

Similar standards

GB/T 6097   FZ/T 01085   FZ/T 10007   FZ/T 10004   FZ/T 10006   

Basic data

Standard ID: FZ/T 10003-2011 (FZ/T10003-2011)
Description (Translated English): Testing method for canvas
Sector / Industry: Spinning & Textile Industry Standard (Recommended)
Classification of Chinese Standard: W10
Classification of International Standard: 59.080.01
Word Count Estimation: 10,131
Date of Issue: 2011-05-18
Date of Implementation: 2011-08-01
Older Standard (superseded by this standard): FZ/T 10003-1992
Quoted Standard: GB/T 6529; GB/T 8170
Regulation (derived from): Ministry of Industry and Information Technology Bulletin No. 13 of 2011
Issuing agency(ies): Ministry of Industry and Information Technology of the People's Republic of China
Summary: This standard specifies the length of canvas fabric, width, density, breaking strength and elongation, dry mass per unit area and the drying shrinkage of test methods. This standard applies to the shuttle and shuttleless looms woven canvas fabric determination.

FZ/T 10003-2011: Testing method for canvas

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Testing method for canvas ICS 59.080.01 W10 People's Republic of China textile industry standards Replacing FZ/T 10003-1992 Test Method for canvas fabrics Issued on. 2011-05-18 2011-08-01 implementation Ministry of Industry and Information Technology of the People's Republic of China released

Foreword

This standard was drafted in accordance with GB/T 1.1-2009 given rules. This standard is a revision of FZ/T 10003-1992 "canvas fabric test method", the following main changes. --- 1m2 dry weight per unit area is adjusted to the dry mass; --- Increasing the nominal clamping length defined; --- Increasing the instrument section; --- Increased the determination of the dry heat shrinkage; --- Canvas fabric combined length and width measurement of content; --- Increasing the breaking strength test holder type, preliminary test; --- Press instruments, principles, procedures, the results of calculation of the chapter authors of the specification. The standard proposed by China Textile Industry Association. This standard by the National Technical Committee of Standardization Technical Committee printing and dyeing cotton textiles (SAC/TC209/SC2) centralized. This standard was drafted. National Textile and Apparel Product Quality Supervision and Inspection Center (Zhejiang), Wuxi Taiji Industry Co., Ltd., on Mirage textile industry technical supervision, China Textile Industry Association, Shanghai Garment Research Institute. The main drafters of this standard. Ruan Yong Dai Meiping, Zhang Baoqing, Wang Keli, Xu Jian, Shi Dongliang, Peng Meiyan, Yang Weihua. This standard replaces the standards previously issued as follows. --- FZ/T 10003-1992. Test Method for canvas fabrics

1 Scope

This standard specifies the length of canvas fabric, width, density, tensile strength and elongation at break, dry mass per unit area yield and dry heat Standard Test Method for shrinkage. This standard is applicable to the determination of shuttle-woven and non-woven fabrics canvas fabric.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document. GB/T 6529 Textiles Standard conditioning and testing atmosphere GB/T 8170 repair value expressed about the rules and limit values and judgment

3 Terms and Definitions

The following terms and definitions apply to this document. 3.1 Standard atmosphere standardatmosphere Relative humidity and temperature controlled environment, textiles in this environment temperature and humidity conditioning and testing. Standard test Air temperature 20.0 ℃ ± 2.0 ℃, relative humidity of 65.0% ± 4.0%. 3.2 Length of the fabric lengthofpiece Fabric along the longitudinal distance from the starting end to a terminal. 3.3 Fabric width widthofpiece Fabric and fabric perpendicular to the longitudinal direction innermost distance between the outer sides. 3.4 Fabric density fabriccount Number of root yarn in the fabric warp or weft 10cm in length contained. 3.5 Breaking strength strengthatbreaking The sample is stretched to the breaking test measured maximum force, in Newtons (N) representation. 3.6 Elongation at break elongationatbreaking Tensile test, the sample is the tensile elongation at break to produce, with a percent sign represents. 3.7 Nominal clamping length lengthwithintwoclamps The sample under pre-tension, the clamp is clamped between two jaws starting distance in mm. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of FZ/T 10003-2011_English be delivered?

Answer: Upon your order, we will start to translate FZ/T 10003-2011_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of FZ/T 10003-2011_English with my colleagues?

Answer: Yes. The purchased PDF of FZ/T 10003-2011_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version FZ/T 10003-2011?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version FZ/T 10003-2011 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.